Jump to content
HWBOT Community Forums

MaddMutt

Members
  • Posts

    823
  • Joined

  • Last visited

Everything posted by MaddMutt

  1. This bench loves speed. Drop to 4c/4t for this bench to get max speed. This also works for 3D Mark 01, 03, 05, and Heaven DX-9 and DX-11.
  2. ^ Thank You for this advice ? I went into the BIOS and set the PCIe split as 8+8+NVME and got an DXE error 63. I then installed a GTX-590 in the first slot and again received a DXE error 63. The MB will run a single gpu card as x16 but can not handle having to split the lanes ? I already have the MB setup for cold so there is no RMA option. This is an Update on my problem with the z590 Apex. I also asked over on HwBot this same Question and was told it might be my MultiPlexers are Buggy. IE not wanting to split my PCIe lanes I went into the BIOS and set the PCIe lanes to 8+8+nvme and got a Error Code 63 which is a DXE error. I also installed a GTX-590 and got the same error code 63. The MB will run a single gpu card as x16 but will not handle having to split the that same lane for a multi card setup.
  3. I know this is a very small request for a future FIX. I can TAB through the submission page and then use the up/down keys to change the - Grey Areas (Cooling Type used, Amount, Disk Type, ect, ect). The Memory Type Used - DDR, DDR2, DDR3 - will not let you use the up/down keys to change the type used. You have to move the mouse and click before the sub-menu will open. Thank You
  4. I again have a submission problem ? https://hwbot.org/submission/5312794_maddmutt_3dmark___cloud_gate_3x_geforce_gtx_480_43989_marks?recalculate=true
  5. If it's the pictures of the computer - I take them with a Camera (5mb) and then open Paint (win 7) to resize and save as a .jpg file for the submission size. If it's a picture of the submission/screen shot - I use Snapshot to save as .png file straight to the desktop/thumb drive.
  6. Does anyone have confirmed SLI working with lower end Video Cards? I have checked the spec’s for the z690 and only MSI and EVGA list Nvidia SLI Technology support. I have a ASUS z590 Apex with a 11900k that refused to run my 2 GTX-450’s. I checked the manual and it stated “NVidia SLI Technology supported - Support Varies with Different Cards. I have tried my GTX-450/550/560 and it posts with a single card. When I insert 2 cards, the board refused to post. I have checked both Primary/Secondary PCIe slots and they work when only 1 card is used. I first thought it was the 11900k (Because of PCIe Gen 4 support) so I purchased a 10900k (still no luck) and then a z490 Hero which worked. I’m also looking to run 2 GTX-780Ti/980Ti Classifieds/Kingpins BUT the z490 Hero does not have an extra GPU power connector on the motherboard. Is this needed if I not running Dice/LN2?? Thank You For Your Time In Reading and Replying?
  7. You’ve got the setup :-) just grab more cards. You going to try 3 way CF?
  8. Is there something I need to change? I'm using snapshot to take the pictures. Is there another screen capture program that you guys recommend?
  9. I apologize for being a pain with needing help on my submissions. I submitted these and got stuck at the - Waiting for score to be updated ? https://hwbot.org/submission/5303424_maddmutt_vrmark___orange_room_geforce_gtx_480_2950_marks?recalculate=true https://hwbot.org/submission/5303422_maddmutt_vrmark___blue_room_geforce_gtx_480_474_marks?recalculate=true https://hwbot.org/submission/5303432_maddmutt_vrmark___cyan_room_geforce_gtx_480_369_marks?recalculate=true https://hwbot.org/submission/5303399_maddmutt_3dmark___fire_strike_(gpu)_geforce_gtx_480_4634_marks/ https://hwbot.org/submission/5303437_maddmutt_3dmark___cloud_gate_(gpu)_geforce_gtx_480_41847_marks?recalculate=true https://hwbot.org/submission/5303438_maddmutt_3dmark___time_spy_(gpu)_geforce_gtx_480_841_marks/ Thank You For Your Time in This ?
  10. I apologize for being a pain with needing help on my submissions. I submitted these 2 and got stuck at the - Waiting for score to be updated https://hwbot.org/submission/5302609_ https://hwbot.org/submission/5302610_ Thank You
×
×
  • Create New...