nice...is a tccd?

yes, because it runs cl3

may be tccc for example

Ruggero has right... and d3mox you are making a mistake one more time. I can run my BH-5 @ CL3. Really, my HyperX's can work @CL3. Nice sburnolo !

I can run my BH-5 @ CL3. Really, my HyperX's can work @CL3.

 

Rare. 95% of BH-5, if not more, will not run at CL3. Got pic?

Rare. 95% of BH-5, if not more, will not run at CL3. Got pic?

 

 

Right

Common, 3-7-7-15? It really needs CAS 3 to go that high, but other timings could be "tight" without any impact and you have only 3 more MHz to the maximum.

Ruggero has right... and d3mox you are making a mistake one more time. I can run my BH-5 @ CL3. Really, my HyperX's can work @CL3. Nice sburnolo !

 

ch-5,not bh-x

My Micron 5B can also easily do 300 C3

Micron don't have problem with CL3 as winbond.

@MR. Scott I did this about year ago. Will remember to upload photo soon. CH-5 yes, also can work with CL3.

@MR. Scott I did this about year ago. Will remember to upload photo soon. CH-5 yes, also can work with CL3.

Just interested is all, because it's a rarity. No hurry my friend.

thanks boys;)samsung tccd corsair, my bh5@cl 3 don't run.

My BH-5 HyperX can work @ CL3.0:

Valid - Photo - MSI 648 MAX / SIS chipset

Valid - Photo - AsRock 775i65G / i865G chipset

 

and pictures of these mems:

Pic1

Pic2

 

I wasn't able to do CL3 with NF2 and NF4 chipsets. Didn't tested it on higher speeds and voltages. Rare, but possible thing

My BH-5 HyperX can work @ CL3.0:

Valid - Photo - MSI 648 MAX / SIS chipset

Valid - Photo - AsRock 775i65G / i865G chipset

 

and pictures of these mems:

Pic1

Pic2

 

I wasn't able to do CL3 with NF2 and NF4 chipsets. Didn't tested it on higher speeds and voltages. Rare, but possible thing

 

Thanks for the pics.

I agree, very rare but not impossible.

I actually have a set of those same sticks here.