Jump to content
HWBOT Community Forums

(FS)Samsung Corsair2666c10 G.Skil PSC/Samsung


Recommended Posts

  • Administrators
Posted (edited)

On sale are my last Samsung mems because I decided to concentrate on legacy ICs like Hyper and BBSE for fun, and also two G.Skill PSC kits

 

jd801347q5jx6.jpg

1. 4x4GB Corsair Dominator Platinum DDR3-2666 Cl 10-12-12-31

 

Best Samsungs I ever had, 1244 Batch, matching kit, with original packaging and fan. Slightly used, all sticks do 2800 C9 tight between 1,86 and 1,9v, not 100% minimized, with extreme tertiaries on normal ambient, easily run higher. Tested for 2800 10-12-12 on z77 and z87 at way below 1,65v. Never used on cold, excellent condition. It is hard to sell these, but I decided to set priorities, and excellent bench Samsungs are not what I need when I do not bench at all.

 

jd801349assvu.jpg jd801350w5srp.jpg jd80135149axu.jpg

 

 

3. 2x2GB G.Skill Trident 2000c9-9-9-24 1,6v

 

PSC ICs, two sticks out of a triple kit, third sticks died at friend of mine on an accident. Tested for 2600 8-12-8-28 and 8-12-7-28 twcl6 tight tertiaries around 1,85 to 1,87v, 2667 works but needs lots of voltage.

 

jd80135497ky2.jpg 1300twcl6188v8-12-7tiouj94.jpg 1300twcl6187vtight53-nmpgf.jpg

4. 4x2GB G.Skill Ripjaws DDR3-1600 C7-8-7-24 1,6v

 

PSC ICs, random purchase a while ago to complete my knowledge on G.Skill, three sticks do 2600 8-12-8-28 twcl6 extreme tight at 1,88-1,9v, fourth one fails, as usual all tests on air, Z87 this time. XEA-PSC, 8layer PCB and good voltage scaling, should be excellent option to get good bench sticks cheap.

 

jd801353oljkt.jpg

 

Prices, including worldwide shipping with Deutsche Post with tracking and insurance

1. 425 Euros

3. 75 Euros - now 70 Euros shipped

4. 95 Euros sold, payment received

 

The items are located at germany, payment is possible with paypal (non cc) or western union.

 

 

 

This is a private sale, therefore no returns and no warranty with me. On oc-results, if mentioned, ymmv but all results are on air and with non binned retail hardware (ocfm z87 is for example only 1150 board I ever used so far, and only one retail sample I paid for^^)

Edited by websmile
  • Administrators
Posted
Could you reserve ripjaws for me for few days?

 

OK, will put them on hold for you, please let me know when you have final decision :)

  • Administrators
Posted
Are you firm on that price for the corsair Samsung's ?

Seems rather expensive.

I'll make an offer of 300US. If not, no disrespect.

 

I don´t take it personal, but I already offer these at 2/3 of european retail price for 2400c9 Plats which are by no means a match for these 2666s^^ - if you need Samsungs at lower price, I can offer you the TridentX, 2800 9-12-12-18 1,96v last test on Z87 Asrock OCFM 32m, also do 2800c9 on Asus Z77 Formula with same voltage

2800c9tight196va7uv5.jpg

 

Thanks, Alex, I don´t take extra money for performance on these :)

  • Like 1
Posted

Always top tier gear man :)

 

As for the dom plats, I have 12 modules and wouldn't let any of them go for less than what you are asking. Remember at launch these were $600 USD and on the Corsair web store they were listed at $749.99.

 

Good luck with the sale Michael, I'm sure everything fly off the shelf.

Posted
Always top tier gear man :)

 

As for the dom plats, I have 12 modules and wouldn't let any of them go for less than what you are asking. Remember at launch these were $600 USD and on the Corsair web store they were listed at $749.99.

 

Good luck with the sale Michael, I'm sure everything fly off the shelf.

 

That was kinda my point at current conversion rate $425 euro = $600 Aud. Can be brought brand new for $50 more over here.

If it was 2/3 of retail price I would happily buy, but I guess Europe much charge more or something.

Posted
You can't buy these new. ;) (Even Corsair don't have any sticks left)

 

/facepalm.... Funny that seeing as there is a kit sitting in the glass display shelf at the store here....

 

Anyway I think this thread has derailed enough.

 

My apologies to websmile, never intended a pissing match.

  • Administrators
Posted

No problem, Fester

To make clear what mems can do, fast run 2800 c10-12-12-21 on z97 below 1,65v, inserted, dialed, ran on new board with new cpu, I took the sticks that did worse on Z77

corsair26663-42800c10oikof.jpg

Ramdom sticks on z77, voltage not optimized, inserted and made run

corsair2-41400c9tight6zu8z.jpg

Other board, other cpu from a while ago, voltage not optimized

corsairkit1400187vcdthrsio.jpg 45ghz32mcorsairpltmtifmli9.jpg

I ran these at lower voltage for 2800c9 for tests, all results air normal ambients, and had around 50 Samsung kits, of which 90% were bin of 2400c9, 2600c10 and 2666C10, which all didn´t match these Corsair...

 

So let´s get back to topic :)

  • Like 1
Posted

Hi web, what about 2x4gb G.Skill TridentX DDR3-2600 C10-12-12-31 on Z97, in particular with MSI MPOWER ?

 

P.S. I try today on LN2 the GBRM kit bought from you, can do 2600 CL 7-10-7-28 @ 1.85V, goooood !!!

  • Administrators
Posted

Good to hear your 1600c7 GBRM are still alive and doing a good job :D - on the TridentX, they work on Z77 and Z87, they will work on Z97 as well and already did, but long time since I had an MSI-Board, I have no experience if Mpower or XPower are able to handle highend Samsung. If board and IMC can do, the mems will easily do above 2800 C9, tested them for 2860 C9 on asrock Z87 and worked.

  • Like 1
Posted
Good to hear your 1600c7 GBRM are still alive and doing a good job :D - on the TridentX, they work on Z77 and Z87, they will work on Z97 as well and already did, but long time since I had an MSI-Board, I have no experience if Mpower or XPower are able to handle highend Samsung. If board and IMC can do, the mems will easily do above 2800 C9, tested them for 2860 C9 on asrock Z87 and worked.

 

I know MSI has done agood job on ram, your PSC are running on Z97 MPOWER without issues. There is a mem profile in bios, and also SAMSUNG 2X4GB 2800MHZ there is.

I don't think there is issues, no ? But i search on web for confirm...;)

  • Administrators
Posted
tested some 2400 c9 and 2666 c10 trident X kits on xpower z87 and z97.. no hassle.. runs 1400 c9 on a bit lower Vdimm then on GB z97X. not expecting any different on mpower

 

Thanks for the info :)

  • Administrators
Posted

Price drop on the Tridents, 70 Euros shipped worldwide, if they don´t sell I wilt retreat them and send them back to owner as i don´t want them to rot here^^ - added two screens at startpost

Guest
This topic is now closed to further replies.
×
×
  • Create New...