Jump to content
HWBOT Community Forums

(FS)Top 6600K/ Strong DDR4-MFR/ DDR3-PSC


websmile

Recommended Posts

  • Administrators

Good morning.

Up for sale is my 1151 retail hardware plus a couple of DDR3 kits which are leftovers of my bench time

 

jd801418ofojv.jpg

 

 

1. Intel Core i5 6600K boxed wof retail

 

With invoice, non delidded, 1,152v vid on Asus, checked for 5ghz 1,32v SPi32m on win 7x64, hwbotprime 1,34v, 5,1ghz 1,41v hwbotprime and geekbench full slots 3333c13 5,1ghz 1,44v, these results can be improved with delidding and much better cooling than my average old air cooler can provide. Best retail i5 I saw so far

jd801420wpudp.jpg jd8014216zjeq.jpg 5ghz132v32mpyss0.jpg geekbench5.1ghz6600k1ozu84.jpg

 

 

2. 3x(2x4GB GEIL Dragon DDR4-3333 C16-16-16-36 1.35v)

 

Hynix, most likely MFR, and some of the best retails I saw so far, I binned these from a lot of kits purchased at german online shops. All kits are capable to run at least 3100c11, 3200c12 and 3333c13, these are minimum values, 3200c12 for example worked on all kits with 1,57v Bios or less, all of them will go higher, 3200c11 boot and win enter worked on most of the sticks but due to lack of experience on ddr4 and z170, I did not push too hard on volts and imc, on full slots I tested 3333c13 as well, was easy. In original packaging with invoices

jd801425epuoa.jpg jd8014241cuu5.jpg 5ghz3200c12tight156vm6zb6h.jpg geil16gb081145ghz32mpjsgj.jpg

 

3. 4x4GB Kingston Predator ddr4-2666c13-14-14-39 1,35v

 

One of three kits I purchased a while ago for X99 which never came :D – when I moved to Z170, I already had some of the GEIL so I did not test too deep on these, 3200 c15-15-28 below 1,35v full slots and 3333 C16-16-28 at same volts in dual. In box with invoice

 

jd801423gvkdq.jpg 023200c1516gb135v3uk06.jpg

 

 

4. 4. 4x4GB Kingston Predator ddr4-26666c13-14-14-39 1,35v

 

One of three kits I purchased a while ago for X99 which never came :D – when I moved to Z170, I already had some of the GEIL so I did not test too deep on these, 3200 c15-15-28 below 1,35v full slots and 3333 C16-16-28 at same volts in dual. In box with invoice

 

jd801429okqp7.jpg

 

5. 2x2GB G.Skill Flare DDR3-1800 7-8-7-24 1.65v

 

Good condition, 2600 8-12-9-28 1,85v tight 32M, 2667 works at same timings but needed around 1,92v on my tests. Kit is uneven, one stick is handbrake, second stick is tested for 2730 8-12-9-28 in dual channel on ocf at 1,9v

 

jd801427ersy3.jpg flarekit313028-12-9tiofo9c.jpg flare23trident88136382bjtx.jpg

 

6. 2x2gb G.Skill Eco DDR3-1600 7-8-7-24 1,35v

 

Kit works without problems but was only used for a surf rig despite being built with xpsc, iirc thex needed a bit above 1,7v gor 2400c7. As ususal, on 1155 and 1150, these need a bit above 1,35v to do specs, this is because of architecture of platforms.

 

jd8014267bskp.jpg

 

7. 2x2GB G.Skill DDR3-1600 7-8-7-24 1,6v

 

One of the best voltage kits I ever had, 2667 tight all benches 8-13-9-28 rtl 40/40 on Impact at 1,78v, unfortunately I only found a 8-13-10 screen at 1,80v 32m, 1,57v 7-11-9-28 2400 on Z77 :D - I think you may find some xtus or geekbench results on hwbot if you want to know more, bulk

 

ripjaws1006899013348-a5uje.jpg jd801428inam3.jpg

 

 

Prices in euros

1. 450 Euros + shipping sold

2. 115 Euros + shipping for each(one) kit one sold to Rule, two other kits sold as well combined, payment received on all three kits

3. 115 Euros+shipping reserved

4. 115 Euros+shipping

5. 60 Euros+shipping

6. 30 Euros+shipping

7. 60 Euros+shipping

 

Payment with paypal or western union, buyer is responsible for the fees, so please take this in ;) - shipping to european community will depend on items, please ask, will be 8-15 euros with deutsche post or dhl, this varies with weight and insurance. No low-balling please, if some items don´t sell I simply keep them

 

Disclaimer: No returns, no warranty by me because this is a private sale. On OC, ymmv, but I test on air and you can check my hwbot profiles for pics of my "highend-cooling"

Edited by websmile
  • Like 1
Link to comment
Share on other sites

Guest
This topic is now closed to further replies.
×
×
  • Create New...