looking for some low voltage cl14 4000 1t round 1.5v, tight subs,  2X8gb sticks

had a few they just seem to degrade after a while my temps werent great then, cant get a good lock on the rtls anymore 

Why do you want C14 specifically and not C12?

just to keep voltage down so i can use on air and for daily. i am not looking to make superpi records 

I haven't heard much about 4k CL14. I'm pretty interested as well.

well they dont market them at that, you have to bin for it yourself which is time consuming and expensive, most are looking for 4133 cl12 sticks which are running at 2v so with not tight timings they must be round 1.5v 

8 hours ago, truth_hurts said:

well they dont market them at that, you have to bin for it yourself which is time consuming and expensive, most are looking for 4133 cl12 sticks which are running at 2v so with not tight timings they must be round 1.5v 

It shouldn't be a memory chip issue, it's mostly an IMC issue.

so most b die will reach that ? the set i have used to hit it but doesnt anymore so imc is ok as one of the issues (high rtl) moves when i change slot. so i either need to replace one stick or get a new set.

1 hour ago, truth_hurts said:

so most b die will reach that ? the set i have used to hit it but doesnt anymore so imc is ok as one of the issues (high rtl) moves when i change slot. so i either need to replace one stick or get a new set.

What is your vccsa and vccio?

its 1.25 and 1.25

5 hours ago, truth_hurts said:

its 1.25 and 1.25

try lowering vccio, there's usually a sweet spot, and especially on ambient I wouldn't think that 1.25v would make it happy. Pumping vccsa has always been helpful to me also but you always have to keep it in safe margin

4 hours ago, yosarianilives said:

try lowering vccio, there's usually a sweet spot, and especially on ambient I wouldn't think that 1.25v would make it happy. Pumping vccsa has always been helpful to me also but you always have to keep it in safe margin

yeah i tried lower io now and upped vdimm rtl are good now but still get errors, i will just get rid of them, which kits have you had most success with lately ? 

18 hours ago, yosarianilives said:

try lowering vccio, there's usually a sweet spot, and especially on ambient I wouldn't think that 1.25v would make it happy. Pumping vccsa has always been helpful to me also but you always have to keep it in safe margin

 

i read 1.4 V max on water, but i really like it lower

1.20 V on both if possible but sometimes need ot bump it around 1.25. more is useful for 4133 c12 perhpas?