Crew Leeghoofd Posted July 22, 2019 Crew Share Posted July 22, 2019 Very efficient run sir, well done 1 Quote Link to comment Share on other sites More sharing options...
TerraRaptor Posted July 23, 2019 Share Posted July 23, 2019 Yep, nice score. I'm completely new to this platform and it seems I run into dual channel issue yesterday but still I need to shave 1 minute off to be on par in efficiency. 1 Quote Link to comment Share on other sites More sharing options...
ksateaaa23 Posted July 23, 2019 Share Posted July 23, 2019 Thank you sir. Still there is scope for improvement. If the priority is high/realtime hanging after 2 iterations. Above normal priority hanging after 20 iterations. This run was with normal priority. Quote Link to comment Share on other sites More sharing options...
Crew Leeghoofd Posted July 23, 2019 Author Crew Share Posted July 23, 2019 ow I just ran full prio out of Benchmate, runs fine here, but too slow on 8150 :p Quote Link to comment Share on other sites More sharing options...
ozzie Posted July 23, 2019 Share Posted July 23, 2019 nice chip and ram K , little more V may stabilise and give you more 1 Quote Link to comment Share on other sites More sharing options...
ksateaaa23 Posted July 23, 2019 Share Posted July 23, 2019 (edited) With realtime/high priority 2nd iteration is completed around 1 min 11 sec & the run with normal 1min 13 sec. So if it goes through should be around 20sec faster. One of the problem is I use minimal v core. Definitely higher v core should do the run high prio & around 13min 55 sec. My former teammate & good friend knows, I use bare min voltage to run benchmarks. Ozzie opposite to me in that aspect. Edited July 23, 2019 by ksateaaa23 Quote Link to comment Share on other sites More sharing options...
ozzie Posted July 23, 2019 Share Posted July 23, 2019 6 hours ago, ksateaaa23 said: With realtime/high priority 2nd iteration is completed around 1 min 11 sec & the run with normal 1min 13 sec. So if it goes through should be around 20sec faster. One of the problem is I use minimal v core. Definitely higher v core should do the run high prio & around 13min 55 sec. My former teammate & good friend knows, I use bare min voltage to run benchmarks. Ozzie opposite to me in that aspect. yes K you have always achieved very good results on minimum vcore voltages, youre quite the mathematician, i have pulled back on the voltage aspect after the loss of too many boards i think definately attributed to the voltages aspect ? Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.