February 9, 20205 yr Thanks Guys! @TerraRaptor Yes i try it with CL5 but (©by Comedy Show Little Britain) The problem was that i couldn`t adjust the CL value via Memset and with a CL value of 5 in the Bios i couldn`t boot ;-( The lowest timings i had yesteday were 6-5-4-14-48-1T (NB@1,63v / RAM@1,90v) Thank you for the idea to make the ram cold. if you only have garbage ram in the house you have to take extreme measures? Edited February 9, 20205 yr by Eisbaer798
February 9, 20205 yr 17 minutes ago, Eisbaer798 said: 6-5-4-14-48-1T Oh man, that is strong. Was it stable though to make backups or boot only? If you make another attempt, try lowering CL together with PL (so if you have CL6/PL6 strap 266, then try CL5/PL5 strap 200/266). Great result bro!
February 10, 20205 yr I always booted with the timings 6-6-6-18-48 and then set the timings in the OS with Memset. 6-5-4-15-48 was benchstable in the benchmark Pifast and 265x I have to test that with the straps again. Thanks for the tip!
February 10, 20205 yr Hello Suzuki! What do you mean exactly? The Rex water cooler? I bought it together with the board. Was just totally dirty and had to be cleaned properly. That was a job?? Here is a link where I uploaded a few pictures of the cooler? https://imgur.com/a/6T73hYI
February 10, 20205 yr Didn’t know this exists :D. Looks awesome and i guess it shaves some degrees from that nb.
February 11, 20205 yr The cooler is very good. Fits precisely and cools all components that are important. Thanks to the cooler, I can keep the NB at 27-32 ° C and can drive an FSB of 676MHz with this REX https://hwbot.org/submission/4117297_eisbaer798_reference_frequency_rampage_extreme_676.14_mhz Edited February 11, 20205 yr by Eisbaer798
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.