Jump to content
HWBOT Community Forums

unityofsaints - Phenom II X4 940 BE @ 5991MHz - 12min 33sec 406ms SuperPi - 32M


Recommended Posts

Posted
2 hours ago, unityofsaints said:

Not selectable in BIOS on this board, one more reason to run Lanparty next time

Most certainly should be. Works on every CPU I've run in the board. What revision and what bios?

Posted (edited)

I think this board should be able to do a little more. I made 3 profiles for running PI. I test them per cpu which is fastest. For DFI DK that is.

Edited by Sparks.nl
Posted (edited)
20 hours ago, Mr.Scott said:

Most certainly should be. Works on every CPU I've run in the board. What revision and what bios?

BIOS 10c. It's hard to know on cold if it's going to POST or just cycling. With 4G+ CPU-NB selected it does E1 -> C1 -> 02 -> E1 -> E4 -> C1 etc. for quite a while. It was getting late in the session and I wasn't sure the sticks would pass 32M anyway even if booted so I let it be. Also only CAS latency is selectable down to 4 in BIOS, the other ones only go down to 5, would need to set those in-O.S. I guess. Next session will be outside of this competition so Ballistix will be available to use so should be much easier.

Edited by unityofsaints
  • 4 months later...
Posted
On 9/26/2021 at 10:30 PM, Mr.Scott said:

Yeah. That bios is a Thuban upgrade bios. Go back to f9. It clocks better.

Only saw this comment now, the stage was hamstrung by having to select bad RAM so I decided to just knock out the score on whatever I had lying around makes sense that the BIOS would be worse on Deneb. The chip is certainly gold-capable on my Lanparty and best sticks. I think the Giga is more of a easy board for valids or wPrime, not really Pi.

  • Like 1

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...