chew* Posted October 7, 2023 Share Posted October 7, 2023 (edited) On 9/21/2023 at 11:06 AM, Domdtxdissar said: Did you miss we are limiting clockspeed to 5ghz max ? ? We have my 5500 run for comparison anyway....... He is 3.4 secs behind. Edited October 7, 2023 by chew* Quote Link to comment Share on other sites More sharing options...
OClockDoc Posted October 8, 2023 Share Posted October 8, 2023 (edited) First steps And one more step: Edited October 9, 2023 by OClockDoc 2 1 Quote Link to comment Share on other sites More sharing options...
I.nfraR.ed Posted November 17, 2023 Share Posted November 17, 2023 (edited) Back to some 32M on Zen4. Should be able to improve it further. 5m 36.210s Edited November 17, 2023 by I.nfraR.ed 1 Quote Link to comment Share on other sites More sharing options...
unityofsaints Posted November 17, 2023 Author Share Posted November 17, 2023 8 minutes ago, I.nfraR.ed said: Back to some 32M on Zen4. Should be able to improve it further. 5m 36.210s Very very nice. Interesting SPD, modded in some way or does it show up like that stock? Quote Link to comment Share on other sites More sharing options...
I.nfraR.ed Posted November 17, 2023 Share Posted November 17, 2023 (edited) 2 minutes ago, unityofsaints said: Very very nice. Interesting SPD, modded in some way or does it show up like that stock? XOC mode of cpuz enabled. Edited November 17, 2023 by I.nfraR.ed 1 Quote Link to comment Share on other sites More sharing options...
Broken APEX49 Posted January 13 Share Posted January 13 Hello all. I would like to resume RAM OC on AMD after a long time, but.., I've forgotten some basic stuff. I thought I wrote it down. It's voltage related. VDDIO_Voltage (VDDIO_MEM_S3) DRAM VDD Voltage DRAM VDDQ Voltage Is it correct that these are basically the same values? VDDIO_Voltage (VDDIO_MEM_S3) is unique to Asrock, right? I seem to remember that DRAM VDDQ Voltage should be lower than DRAM VDD Voltage, I have searched the site, though, VDD_SOC is recommended to be 1.3V or lower, right? Translated with DeepL.com (free version) Quote Link to comment Share on other sites More sharing options...
Broken APEX49 Posted January 13 Share Posted January 13 The display is different for you and me. Why? CPU VDDIO? It's in the BIOS, but how do other ASRock users set it up? Quote Link to comment Share on other sites More sharing options...
I.nfraR.ed Posted January 13 Share Posted January 13 It is really hard to understand what you are asking. It is not needed to have equal VDDIO, VDDQ and VDD. They also depend on CPU and memory sticks. For VDDIO people usually stay in the 1.30 - 1.40V range. VDDQ and VDD are not displayed correctly in ZenTimings when high voltage mode is enabled. Quote Link to comment Share on other sites More sharing options...
Broken APEX49 Posted January 14 Share Posted January 14 5 hours ago, I.nfraR.ed said: あなたが何を尋ねているのかを理解するのは本当に難しいです。 VDDIO、VDDQ、および VDD を等しい必要はありません。CPU とメモリースティックにも依存します。VDDIO の場合、通常は 1.30 ～ 1.40V の範囲に留まります。 高電圧モードが有効になっている場合、VDDQ と VDD は ZenTimings で正しく表示されません。 It does not appear in other people's ZenTimings. I'm wondering if this is a BIOS specification only for ASRock B650E Taichi. but it doesn't seem so. You must be wondering! Quote Link to comment Share on other sites More sharing options...
I.nfraR.ed Posted January 14 Share Posted January 14 I have added it in version 1.31. All BIOSes have this voltage, it was just not displayed in older ZenTimings versions. Quote Link to comment Share on other sites More sharing options...
Broken APEX49 Posted January 17 Share Posted January 17 It's not the 5G Challenge. I'm trying SuperPI with 7800x3d For now, the only RAM timing on the 7800x3d is the EXPO setting. ECLK overclocking with CO set to 107, all cores needed to be positive and up to 23. I checked the cores in RYZEN master and found that in my case 1 core was good and 3 cores were second best, so I set 1 core to positive 23, 3 cores to positive 22, and the other cores to negative 0. With this setting, I was able to complete the PI. Is this the right direction as a basic idea? I know this is off topic, but any advice would be appreciated! Translated with DeepL.com (free version) Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.