SparkysAdventure Posted May 15 Share Posted May 15 ooooh, getting serious now Quote Link to comment Share on other sites More sharing options...
l0ud_sil3nc3 Posted May 15 Share Posted May 15 5 minutes ago, SparkysAdventure said: ooooh, getting serious now These modules are the first 2/4 from the quad 2400c8 RipZ kit and only needed 2.15v for 2800c6, see how the others do next. Quote Link to comment Share on other sites More sharing options...
SparkysAdventure Posted May 15 Author Share Posted May 15 9 hours ago, l0ud_sil3nc3 said: These modules are the first 2/4 from the quad 2400c8 RipZ kit and only needed 2.15v for 2800c6, see how the others do next. Did those sticks ever do 2800c6 SP32M? That's impressively low volt, likely has scaling to 2933+ Quote Link to comment Share on other sites More sharing options...
Emil.SU Posted May 15 Share Posted May 15 Nice, it was getting boring on top. So what should be next 5775c with ln2 PSC or 7600k + whatever ram runs on shitty D3 mobo? 1 1 Quote Link to comment Share on other sites More sharing options...
TaPaKaH Posted May 15 Share Posted May 15 What year is it? 1 Quote Link to comment Share on other sites More sharing options...
l0ud_sil3nc3 Posted May 15 Share Posted May 15 3 hours ago, SparkysAdventure said: Did those sticks ever do 2800c6 SP32M? That's impressively low volt, likely has scaling to 2933+ These sticks never ran 2800 before but I remember they had a low boot voltage limit so even 2.20v failed to train. Setting 2.15v they trained super consistently at 2800 but failed to train 2933 and didn't spend much time trying higher after that. 3 hours ago, Emil.SU said: Nice, it was getting boring on top. So what should be next 5775c with ln2 PSC or 7600k + whatever ram runs on shitty D3 mobo? How about 7600K + LN2 PSC + D3 mobo 😎 8 minutes ago, TaPaKaH said: What year is it? The best years™️ 1 Quote Link to comment Share on other sites More sharing options...
phobosq Posted May 15 Share Posted May 15 Have you tried those sticks on air? What's the scaling when going from air to LN2 @2.1-ish volts? Curious to see what comes next, but 9 secs will fall sooner or later :D Quote Link to comment Share on other sites More sharing options...
Splave Posted May 16 Share Posted May 16 slow clap :) 1 Quote Link to comment Share on other sites More sharing options...
l0ud_sil3nc3 Posted May 16 Share Posted May 16 21 hours ago, phobosq said: Have you tried those sticks on air? What's the scaling when going from air to LN2 @2.1-ish volts? Curious to see what comes next, but 9 secs will fall sooner or later Air these can run 2750c8 tuco tight at 1.92v > to 2800c6 tight on LN2 at 2.15v The best PSC in my collection I believe is still the 2000c6 Pi but will find out soon 2 Quote Link to comment Share on other sites More sharing options...
phobosq Posted May 26 Share Posted May 26 On 5/16/2024 at 7:27 PM, l0ud_sil3nc3 said: Air these can run 2750c8 tuco tight at 1.92v > to 2800c6 tight on LN2 at 2.15v The best PSC in my collection I believe is still the 2000c6 Pi but will find out soon Thanks, much appreciated. It seems that I'd have to go through whatever leftovers I can get online, I checked a few kits for volts and found two capable of 2760 8-13-8 but at around 2.05 air, funny thing is I always thought PSC hard walls at 1.96 on air. That's still far from 1.92 Quote Link to comment Share on other sites More sharing options...
.thumb.jpg.a9c08a21b01052c0429a5ff2a05dc711.jpg)
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.