Christian Ney Posted August 19, 2011 Share Posted August 19, 2011 (edited) Here is a true story that happened to me, so a little bit more than one year ago I bought an OCZ Vertex SSD 30 GB OCZSSD2-1VTX30G (230 MB/s(Read) 135 MB/s (write) and 85 MB/s (Substained write)). like on the following picture: http://img268.imageshack.us/img268/3618/oczssd21vtx30g.png 3 months ago the ocz vertex died, so I went to their website and asked for rma. rma approved, I sent my ssd to them. Here is what they send back to me, a new OCZ Vertex SSD 30 GB OCZSSD2-1VTX30G. What so lovely to find written on the box the following specs: Read: 210 MB/s Write: 75 MB/s Substained Write: 25 MB/s http://img832.imageshack.us/img832/680/img0214qc.jpg'>http://img832.imageshack.us/img832/680/img0214qc.jpg'>http://img832.imageshack.us/img832/680/img0214qc.jpg Actually a twice less performing ssd. Without even opening the package I opened a new support ticket on their website saying that they sent me the wrong drive. Here is their reply: ''Are those just the numbers on the box, or were those the benchmarking results from running ATTO on the drive? I recommend actually running ATTO on the drive'' Despite the fact that on the opened ticket I clearly wrote ''numbers written on the box'' So here is FAIL #1, so close to FAIL #2: as you can see on the following picture http://img832.imageshack.us/img832/680/img0214qc.jpg numbers on the box are based on ATTO New reply from OCZ, I quote: ''But did you actually run the ATTO disk benchmark program on the drive to benchmark that particular drive? This is the most accurate way to get the speed of the drive rather than reading the numbers on the box. After running the ATTO program on your drive, what read and write numbers does it give you for your specific drive?'' FAIL #3: Specs and numbers on the box aren't the ones of the product inside !!!! Okay... let's open the box, take the ssd, plug it to my test system (Operating System is actually installed on a Seagate Barracuda 7200.12 500GB). I formated the drive, I ran ATTO, here are the values: http://img190.imageshack.us/img190/7025/vertexrma.jpg 200 MB/s Read and 140 MB/s write, ok close to the drive I sent to RMA and far away to what is written on the box where this drive comes from. FAIL #4: The drive doesn't match with the specs on the box. Ok so finally I got the right drive it seems ? Now start to install my Operating System on it, first try I got a blue screen after 10 minutes during the installation of windows XP, try 2, after 4 minutes try 3, after 17 minutes. Ok let's try to install windows 7 then. Again blue screen after few minutes during the process. Hum, time to change memory, processor, motherboard. Same, getting blue screens over and over again. Change the whole setup again, no way blues screen are here. Try to install Windows XP on a Hard Drive, it works, windows 7 too, from the first try. Ok, back to OCZ Vertex, fail again, blue screen over and over again. After 38 tries for windows XP, I finally managed to install it on the OCZ Vertex, and 17 tries for Windows 7. Drive seems defective isn't it ? FAIL #5 So I back to OCZ support, here is what they said: ''What error message are you receiving during the installation process? At what point does the error occur? Is this a fresh install or are you imaging/cloning to the drive?'' -Not always the same -Randomly -Fresh install OCZ: ''If the drive has been repeatedly benchmarked it will slow down until it has time to clean itself up. The drive will automatically maintain itself when idle. If you want to reset the drive right away you can do a destructive reset here: http://www.ocztechnologyforum.com/staff/ryderocz/misc/sanitary_erase.zip Then from there quick format it with Windows 7 and run ATTO on the drive just one time'' What, I said the drive is defective and that I cannot even install an Operating Sytsem on it and they ask if I have repeatedly benched the drive ? and to clear/erase it, what the.... the drive is new you just sent it to me, what's so wrong with you. Read my comments added to the helpdesk!! FAIL #6 ? They do not read your emails ? Ok so as this one is defective, I ask for RMA and told them that I am away for 2 weeks in vacation and without internet, rma accepted. Back from vacation I see that they sent me a courier (fedex) when I was away.... FAIL #6 confirmed. First good point for ocz though, they sent me an attached pre-paid shipping label, so they take care of the return of they defective part. But, when I was in vacation (I took the vertex with me as my only ssd and I needed it), things got worse, sometimes the drive wan't reconized at post nor in the bios. So no way to boot my operating system. Sometimes the operating system just freeze or crash and when I reboot the computer it says ''no bootable device'' I had to turn off the computer and turn it on again, benchmarks like PCMark05, PCMark Vantage and PCMark 7 were always failing to compute due to aborted/failed HDD tests. So as I am back and the support ticket is gone after 7 days, I opened a new one complaining that the drive is getting more and more defective. I sent them a very long email telling all issues I encountered with their OCZ Vertex and asked that they send them first a new drive so I can move all my operative system and data from drive to drive. OCZ replied: ''I sincerely apologize for any issues or inconveniences you have been experiencing with your OCZ product. Please provide us with the information requested below as a comment to your Ticket for RMA processing[...]'' then: ''I apologize, please disregard the previous message. Just verify your shipping address for me please'' They moved the status of my support ticket to advanced rma so said ''I set you up for advanced rma, so what’s going to happen is we are going to charge your credit card for the amount of the memory. Then once we get your bad product we will immediately credit your card back. You will be getting further details about the charge in an automated email that will be sent to you from the rma system'' What I understand is that I have to pay something so they can send me the new one, let me move my data and they will pay me back when they got the defective one. But the defective one is gone for real, no more reconized thru the bios, nor thru the post, windows installer doesn't see it and another computer too. Drive is 100 % dead. Time to use the prepaid shipping label, vertex is sent to them and I asked them by email to recover all my operating system and data on the new drive. FAIL #7: They didn't do it and even better they did not tell me they were not going to do it. After 5-6 days, according to TNT Express tracking number they received the defective drive 3 days ago, so I asked for some news, here are the three replies I got from OCZ: ''it will be replaced within 48 hours '' I replied 3 days after: ''any news ?'' OCZ again: ''for some reason it doesn't look like we received it. please contact supporteurope@ocztechnology.com '' What ? Tracking number stats you got it one week ago !!! OCZ again: '' that was my mistake what i ment was when we receive it and process it it will be shipped out within 48 hours. its not in our system for some reason'' Okayyy, they just don't care about you and reply randomly to you, FAIL #8 New drive received today, again with the following specs: Read: 210 MB/s Write: 75 MB/s Substain Write: 25 MB/s http://img832.imageshack.us/img832/680/img0214qc.jpg which is again a twice less performing ssd. But wait this is just what is written on the box, as from my experience with OCZ products, specs on the box don't match with the product in the box. Too bad this time it was true, I really received the twice less perfoming OCZ Vertex SSD: http://img268.imageshack.us/img268/7739/oczssd21vtx30g.jpg FAIL #9 just for the record, I quote their own Warranty Policy: ''All OCZ Technology, Inc. (''OCZ'') products are warranted and tested to be free from defects in material and workmanship and to conform to the published specifications.[...]OCZ will repair the product or replace it with a comparable or better unit.'' HAHAHAHAHA What a joke Conlcusion: OCZ is an absolute joke, you are aware True story, I got all emails from them, pics of drives, pics of benchs as proof. to OCZ, feel free to delete/remove my article about the truth about OCZ and things will be even worse for you Ok, after posting on their forum things went really better, the guy know what you are talking about and take care of the situation way much better than using Support Ticket Helpdesk. They offered to send me a Vertex 120GB, I asked them if a Vertex 2 40GB was possible and they replied that they are going to send me a courier as soon as possible to take back the Vertex they sent me and will send me a Vertex 2 60GB as soon as possible. For my experience through the forum there is no problem for support/rma/help, they replied very quickly and the guy who your are talking with know what to do and what you are talking about. Conclusion, as from my experience here, OCZ forum is THE place to ask support/rma, by using the ''helpdesk support ticket'' you will just suffer if you ask technical info or want an advanced rma. Just to clarify, we do not use a third party for support. Exdesk is the ticket software/hosting company. The people that answer tickets all work for OCZ in San Jose, CA. Edited August 23, 2011 by Christian Ney typo correted Quote Link to comment Share on other sites More sharing options...
Hondacity Posted August 19, 2011 Share Posted August 19, 2011 this post is for xs, as there is a rep there lol Quote Link to comment Share on other sites More sharing options...
Christian Ney Posted August 19, 2011 Author Share Posted August 19, 2011 (edited) I posted it over 10 forums atm, more coming tomorrow. What support ocz provided is way not professional, need to be public, dont want that customers/normal users get fucked by big brands/manufacturers. We need to fight in this world. Edited August 19, 2011 by Christian Ney Quote Link to comment Share on other sites More sharing options...
Mean Machine Posted August 20, 2011 Share Posted August 20, 2011 I RMA'd my 32GB eSATA drive, cost a whole lot at the time, I think about €150. They offered me a €50 credit, since it was EOL, and they couldn't send me a new one. In the end, I got a kit of DDR3 mems (3x2GB kit, I think, some Gold series crap with 10-10-10 timings at 1333MHz or somethingi), sold that for about €100 or something, back when memory was worth money. So... Yes. Haven't bought anything OCZ since. Quote Link to comment Share on other sites More sharing options...
rebelion Posted August 20, 2011 Share Posted August 20, 2011 Now i understand better your first post Christian. Thats not the correct policy about a RMA IMO. Good luck with this fight! Quote Link to comment Share on other sites More sharing options...
Mafio Posted August 20, 2011 Share Posted August 20, 2011 ocz fail at failing...bah, and i thought they were a "good" brand with good customer service. Quote Link to comment Share on other sites More sharing options...
TaPaKaH Posted August 20, 2011 Share Posted August 20, 2011 Yes, they sometimes make really lowball offers on EOL products but RMA on currently made stuff is "alright" Quote Link to comment Share on other sites More sharing options...
Christian Ney Posted August 20, 2011 Author Share Posted August 20, 2011 on their website, it's not EOL Quote Link to comment Share on other sites More sharing options...
Morphling Posted October 5, 2011 Share Posted October 5, 2011 OCZ was a good memory brand in the time of Athlon64 chips. They had TCCD IC's and BH-5 IC's that were the best of the best. And when something was damaged, in 2 weeks you would have something equal or better at home. From 3 years to nowdays they are simply and purely, CRAP! I had not 1, not 2, not 3, not 4, but 5 OCZ Blade 3*2GB 2000@7-8-7-19 1.65v RAM kits. Obviously they have all died From 15 dimms, only one is alive. The rest went to RMA some time ago. The result was 1 SSD's, of 60GB (I would like to remember that each 3*2GB kit was about 450$! So 1800$ in 4 kits!) and 3 brand new OCZ Blade 2000@7-8-7-19 1.65v. From what you can see, it seems perfectly reasonable BUT NOW LOOK AT THIS!!! OCZ Blade 3*2GB 2000@7-8-7-19 1.65v were known, as Corsair TRX series for having Elpida Hyper MNH-E. They could do, without any efort 7-7-6-18 2000mhz 24/7 with 1.65v. THE 3 KITS, 9 DIMMS I RECIEVED FROM THEM WERE EXACTLY THE SAME EXCEPT THE IC'S!!! They were rated 7-8-7 2000mhz with 1.65v. But they couldn't do that even with 1.75v!!! 2 Boards were tested on 1366 platform and one on 1156 and 1155!! They have just put there Elpida B die IC's! I was simply deceived from OCZ! Any other decent brand would have said to me first that it was EOL products, so they will have to give me crap! It was not right to give me something just to try to blur my eyes! So as you can see friend, you are not alone Regards 1 Quote Link to comment Share on other sites More sharing options...
rbuass Posted November 4, 2011 Share Posted November 4, 2011 Thanks for the information Christian. This can open our eyes to a next purshase... Good lucky Quote Link to comment Share on other sites More sharing options...
Christian Ney Posted November 4, 2011 Author Share Posted November 4, 2011 well, if you need/want support, go by their forum. Do not use their suppoer center (helpdesk) unless you like to suffer Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.