Hyperhorn Posted June 20, 2010 Posted June 20, 2010 Sick FSB/RAM combination CR 1T? (Memset shows 2T) Quote
TaPaKaH Posted June 20, 2010 Posted June 20, 2010 CR is actually 1T I use MemSet 3.4beta3 because newer versions tend to misread and mis-set the tRTP parameter (more important than misreading CR) George, these are my trusty old 14400 Dominators (GTR) ... can do this and this 1 Quote
George_o/c Posted June 20, 2010 Author Posted June 20, 2010 900 6-6-5, nice! And with cosiderably low voltage, at least for GTR standards However, I always though that Hypers are the way to go now, even for older LGA775 platforms like X48. Quote
TaPaKaH Posted June 20, 2010 Posted June 20, 2010 I've tried various Hyper kits on various X48 boards - they're not meant to work together. First, 2x2Gb causes a lot of load on MCH (which results in lower clocks -> bad) and 2x1Gb is difficult to find. Second, what can you run your hypers at? 950-1000 6-7-6 at best ... gets easily beaten with GTR same freq but 7-6-6/7-6-5 1 Quote
Monstru Posted June 20, 2010 Posted June 20, 2010 Sam - FLUCK YOU man for doing Pi at 690 FSB!!! Great work man!!! Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.