Based off initial reports from Schmuckley, I decided to do a bit of testing into this issue myself.

 

To replicate, do the following:

1. In the OS, hit F7 to save your validation file
   
2. Change the clockspeeds (or cause speedstep to kick in) and hit F7 a few more times
   
3. Go to valid.canardpc.com to validate your files
   
4. Submit your first validation (it should work)
   
5. Wait a few minutes and try to submit any other validation (hint: you'll get the error "This ID is invalid")
   

 

First sub (works)

Second sub (doesn't work)

 

I could use a few more people testing! Since 1.65 is about lose validation capabilities, it would be great if we could figure out a way around this.

Check the url of that second sub

 

h4x0r

 

You'll be seeing a lot of this next week: http://valid.canardpc.com/qh4x0r

Save da cold juice til this blows over!

Looking into it, thanks guys, you are not the only ones to have this issue. I will have more info tomorrow on what's going on.

 

EDIT: Tried on my end, managed to reproduce the issue.

The fix: Wait more than 10 minutes between the two online submit. 12 to be safe. You can resubmit the second one, it must work now.

But yeah it's indeed a bug, it shouldn't said invalid ID but redirect to the previous valid like before.

Should be fixed next monday.

Edited August 28, 201311 yr by Christian Ney

Fixed now, it's like it was before.

Update pushed in 1.66.1 or will there be a .2?

Wasnt a bug in the soft but in the online process

all good then? Monday is right around the corner..

Wasnt a bug in the soft but in the online process

 

Sorry but... i'm having actually the problem... i was 3 months without submitting, and now have "immediate" bug -.-

3 hours of test and experiments but NO MODE FOR WORK

Sorry but... i'm having actually the problem... i was 3 months without submitting, and now have "immediate" bug -.-

3 hours of test and experiments but NO MODE FOR WORK

 

the same for me too

 

always the same message "This ID is invalid"...

 

chance to fix it?

for those who have this problem advice to send an email to "cpuz@cpuid.com" attaching the file. CVF and the report. TXT. I have quickly responded with the working link of validation...

Can you guys send me the cvf files that don't work via email please christian [at] hwbot.org.

Also the urls that says "This ID is invalid" when you submit.

 

Thanks.

 

Delly was another problem that was specific to his PC.

Delly was another problem that was specific to his PC.

 

I think the problem was related to online validation, for example, now with the same pc I have no problem, yesterday I had it with 3-4 different pc

Ha, they told me something different

had 1.66.1 working fine and then it prompted me to update to 1.67.... DON'T use 1.67..

 

Sempron 145 using cpuz 1.67

File cpuz6006_5.cvf upload : OK

Dump corrupted !

 

i7 2600K stock using CPUZ 1.67

File cpuz1604.cvf upload : OK

Dump corrupted !

 

I tried 5 different overclocked sempron 145 .cvf files, all corrupt.

I tried my daily machine and my laptop and get all the same corruption errors.

Fixed, please download again 1.67 (has been updated with a new version).

thx