xxbassplayerxx Posted August 28, 2013 Share Posted August 28, 2013 Based off initial reports from Schmuckley, I decided to do a bit of testing into this issue myself. To replicate, do the following: In the OS, hit F7 to save your validation file Change the clockspeeds (or cause speedstep to kick in) and hit F7 a few more times Go to valid.canardpc.com to validate your files Submit your first validation (it should work) Wait a few minutes and try to submit any other validation (hint: you'll get the error "This ID is invalid") First sub (works) Second sub (doesn't work) I could use a few more people testing! Since 1.65 is about lose validation capabilities, it would be great if we could figure out a way around this. Quote Link to comment Share on other sites More sharing options...
topdog Posted August 28, 2013 Share Posted August 28, 2013 Check the url of that second sub h4x0r Quote Link to comment Share on other sites More sharing options...
Schmuckley Posted August 28, 2013 Share Posted August 28, 2013 You'll be seeing a lot of this next week: http://valid.canardpc.com/qh4x0r Save da cold juice til this blows over! Quote Link to comment Share on other sites More sharing options...
Christian Ney Posted August 28, 2013 Share Posted August 28, 2013 (edited) Looking into it, thanks guys, you are not the only ones to have this issue. I will have more info tomorrow on what's going on. EDIT: Tried on my end, managed to reproduce the issue. The fix: Wait more than 10 minutes between the two online submit. 12 to be safe. You can resubmit the second one, it must work now. But yeah it's indeed a bug, it shouldn't said invalid ID but redirect to the previous valid like before. Should be fixed next monday. Edited August 28, 2013 by Christian Ney Quote Link to comment Share on other sites More sharing options...
Christian Ney Posted August 30, 2013 Share Posted August 30, 2013 Fixed now, it's like it was before. Quote Link to comment Share on other sites More sharing options...
GENiEBEN Posted August 30, 2013 Share Posted August 30, 2013 Update pushed in 1.66.1 or will there be a .2? Quote Link to comment Share on other sites More sharing options...
Christian Ney Posted August 30, 2013 Share Posted August 30, 2013 Wasnt a bug in the soft but in the online process Quote Link to comment Share on other sites More sharing options...
Schmuckley Posted September 1, 2013 Share Posted September 1, 2013 all good then? Monday is right around the corner.. Quote Link to comment Share on other sites More sharing options...
Diabolik Oc Posted September 21, 2013 Share Posted September 21, 2013 Wasnt a bug in the soft but in the online process Sorry but... i'm having actually the problem... i was 3 months without submitting, and now have "immediate" bug -.- 3 hours of test and experiments but NO MODE FOR WORK Quote Link to comment Share on other sites More sharing options...
delly Posted October 2, 2013 Share Posted October 2, 2013 Sorry but... i'm having actually the problem... i was 3 months without submitting, and now have "immediate" bug -.-3 hours of test and experiments but NO MODE FOR WORK the same for me too always the same message "This ID is invalid"... chance to fix it? Quote Link to comment Share on other sites More sharing options...
delly Posted October 2, 2013 Share Posted October 2, 2013 for those who have this problem advice to send an email to "cpuz@cpuid.com" attaching the file. CVF and the report. TXT. I have quickly responded with the working link of validation... Quote Link to comment Share on other sites More sharing options...
Christian Ney Posted October 3, 2013 Share Posted October 3, 2013 Can you guys send me the cvf files that don't work via email please christian [at] hwbot.org. Also the urls that says "This ID is invalid" when you submit. Thanks. Delly was another problem that was specific to his PC. Quote Link to comment Share on other sites More sharing options...
delly Posted October 3, 2013 Share Posted October 3, 2013 Delly was another problem that was specific to his PC. I think the problem was related to online validation, for example, now with the same pc I have no problem, yesterday I had it with 3-4 different pc Quote Link to comment Share on other sites More sharing options...
Christian Ney Posted October 3, 2013 Share Posted October 3, 2013 Ha, they told me something different Quote Link to comment Share on other sites More sharing options...
XtremeCuztoms Posted October 14, 2013 Share Posted October 14, 2013 had 1.66.1 working fine and then it prompted me to update to 1.67.... DON'T use 1.67.. Sempron 145 using cpuz 1.67 File cpuz6006_5.cvf upload : OK Dump corrupted ! i7 2600K stock using CPUZ 1.67 File cpuz1604.cvf upload : OK Dump corrupted ! I tried 5 different overclocked sempron 145 .cvf files, all corrupt. I tried my daily machine and my laptop and get all the same corruption errors. Quote Link to comment Share on other sites More sharing options...
Christian Ney Posted October 14, 2013 Share Posted October 14, 2013 Fixed, please download again 1.67 (has been updated with a new version). Quote Link to comment Share on other sites More sharing options...
u22 Posted October 14, 2013 Share Posted October 14, 2013 thx Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.