Im playing with 780 Ti now for some days. When i run newer Benchmarks, ala Catzilla or Heaven everyrting is fine an card stays in 3D state. But when i run 3DM01-3DM06 with 780 TI, cards sometimes lost 3d state and turned back to low 3D or 2d clocks

How can i fix this issue? LN2 Bios is flashed on TI, but same issue on normal Bios, how can i force 3d clocks on 780 Ti all the time?

I had this issue when playing about with a 8970M recently and would love to know what the solution to this is.

hey try thermspy! for p0 state

Wont work

Is there a new Thermspy for Kepler?

I dont know, my version dont work right with the card. It only forces low 3D state

My version crashes Kepler cards

I got it now, many thanks to Splave

Nvidia Power Mizer is the way to go

Thanks for the headsup

We have to thank Vivi and Splave for this :nana:

...Then thankyou Vivi and Splave

Im playing with 780 Ti now for some days. When i run newer Benchmarks, ala Catzilla or Heaven everyrting is fine an card stays in 3D state. But when i run 3DM01-3DM06 with 780 TI, cards sometimes lost 3d state and turned back to low 3D or 2d clocks

How can i fix this issue? LN2 Bios is flashed on TI, but same issue on normal Bios, how can i force 3d clocks on 780 Ti all the time?

 

Not unexpected considering older 3DMarks (06 and older) are effectively CPU marks at this point...

 

Same probably will happen also with Ice Storm which is too lightweight of a test for high end dedicated GPUs.

Regardless, we fix this issue