poparamiro

No, works in 1920x1080. ASIC 69%

Really don't know.

Do not have a chiller.

drop some antigel in it al let it to freezer

hehehe Thanks Just wanted to see how the GPU scale with cold water K, with your card on LN2 + vantage LOD i have no chance

Thanks

Unfortunately it's bugged

I use normal bios for air/water but in your case must set the strap (enable LN2 contacts) and the bios for LN2. Memory heatear also on for LN2

Yes, i see no improvement, only LLC to 50% set. The card need LLC disable to be perfect stable on vGPU, like the Matrix 290X.

Don't undestand what you mean with "vrm value"

17 oC water 29 oC load temp on this

Rampage 4 Formula

~1.33v water at 17 oC on that screen (30 oC load temp)

Yes, but not sure 100% is uP.

Ok, best regardas

==) Thanks

~1.33v, did not test more, need cold water

If you look better, it's 10 oC load, not 2 oC. 2 oC is idle temp (wich is the aproximative temperature of the water) 100l barrel with water left outside in low ambient and the best vga block + 3600l/h submersible pump Well, check the video bellow if you need more proof (HD 5870 - 1200+ mhz @ water above zero degree)

Yeap, simple and logic thinking. With one clear video he can shut us down. If not, i'm afraid it is manufactured in some other ways.

Teoreticaly yes But is all about honesty and respect for others.

Unless i see with my own eyes the filmed run with sistem, temps and freq clearly showed, the problem remains. What if tomorrow i hit 1300mhz with GTX580 on water, no filmed run, no AFB monitoring in screen and i move to OC league - the result is legit???

==)) As i said, not even Santa Claus will hit 1100+ on water. Best of best 4850 will do ~ 1000mhz heavy load at ~ 1.6v and zero degree water.

When i was under suspicion, i done video for every card, no problem, as i can do now for all good VGA's i posted, they are all here.

Not one HD4850 on this earth will do 1100+ mhz on water, even if it is at -10 oC. They hardly hit 1000 -1020mhz, best of them. I mostly use water at 1-3c.

69.3%