bolc

here are the screens, each going through spi32m individually. I am having the "worst" 2 running in dual channel at 1.75 v as I speak. the small difference in voltage is mostly due to the motherboard and cpu imc I think, not the rams

I am about to boot my M7R which can handle very high ram freq on psc at cas8. do you want a screen of some sort for those? i will make spi32m for each at 2400, easiest for now. first goes at 1.70 V... let me know in pm ++

on x79 do you need / can you even do 2400 on the ram ...? i have a 4x2 gb kit of gskill pi 2200c7 917600 cl7) as well timings same as above 2 are fairly serious with 2600 cas8 very tight below 1.9 V, and the 2 less good do 2400c8 at 1.75 V dual channel. the other 2 will do it below 1.75 but have not tested which exact voltage they need

Hi, looking for psc for intel or amd benching? any specs in mind? currently have a kit 2x2 gb of g.skill PI 2000 (16000) CL7 for sale, you have frequency / first timings / voltage for each stick to pass spi32M tested timings are 8-11-8-28-1t 4-88-10-4-26-3-4-7 4-5-4-15-5-4-4-4-4-11-11-10 tref auto or 8-12-8-28-1t 4-88-10-4-26-3-4-7 4-5-4-15-5-4-4-4-4-11-11-10 tref auto cheers

too late websmile board is sold to Nico / Gigelz! Have fun !!! thanks hwbot for the space

hey all did I dream or read poorly, or someone trolled, that only participants to the team cup will be allowed to bench on the country cup ? cheers

if you want to pay 217, it is fine with me you got me wrong or I explained poorly the insurance covers up to 60-65 euros (using this crazy DTS rule) using the 21.50 shipping rate. for extra insurance, i reread the thing and apparently, adding 3 euros adds 300 euros insurance. (I understood 4euros flat rate + 1euro per 100 euros insured but apparently the 4 euros flat is not needed!) so only add 1 euro per 100 euros insured.. we say 25 euros for 300 covered? (if it gets lost, better have 300 than 2 :D) now there is some weight space left in the package. are you looking for ram or something else perhaps?

you have so many other chip IC and pc stuff craiglist shows none i guess ?

that was fast it might be expensive, depends the mobo box weights 2.8 kgs, in a package this will mean the 2-5kgs rate at 21.5 euros, with an included insurance of some weird DTS rate (44.5 + extra kgs x 4.5 = 55 DTS at 1.22 euros so around 60-65). for insurance at 200 euros, it adds 7 euros or so if I am reading well

for a change, Americans envy us

lol should I raise it?

I am selling my board, used in my h24 pc. Selling because it is useless in my h24 rig and my M5F does a fantastic job for benching ! the board never went subzero, and it never went on watercooling either ! was running with i5 3570 and intel stock heatsink come with io shield, accessories, the special dongle i never used, dual, tri and quad sli, wifi card plus 2 antennas, a usb cable for something. sata cables of all sorts. and voltage extension cables socket in mint condition, no known issues. asked price 150 euros excl. shipping shipping withing EU

4 so far, why ?

have only one tab of hwbot opened, in a fresh browser. when you have several tabs of hwbot submission opened, it will bug if mozilla, try chrome or ie

CAS6 was easy....! CAS 7 next...

thanks, this is helpful anyways so far so good tRDWR_dd at 7 is a no go. i have increased FAW and TWRRD to check what id does ; except the initial value calc, it makes it slower overall

thks i will give it a try but it does not like me putting 4s instead of 5s in the tertiaries nope it won t do the listing a decent voltage, or at all. trfc52 goes fine though. trrc48 boots but will need more voltage, at 1.82 the spi32m time goes longer. i need to check the impact of faw and tWRRD on performance, then trfc and tras, and i will be done for now and next, 776 20 ishish so i can redo my 2500k spi32m score

looks like i stumbled on a fairly good one... IO-L rtl was set to 4, but now it stucks to 5 and if I force 4,. it will not post... any ideas what I am missing? but it does even bette at spi32m with 5...

is TRDWR supposed to be the sum of TRDRD and TWRWR ? and same for their respective dr and dd ? and TWRRD = TWRWR + TRDWR ?

so far :

yep I got you, this is clearly different form the g3258 / m7 series language i am used to I tried some 1800 6 6 5 17 1t trfc=56 with tight subtimings. I know some tWRRD dr dd and tWRWR dr dd need to be = 5 or it won t post. I will post some screenshots and if you have advices guys, let me know. the next question will be: is it more efficient to have these low values or should I increase some back ... max safe voltage on hypers is 1.85 ...? (if I want to keep those sticks :D) ; on psc i can bench up to 1.95 but i rarely use more than 1.85-1.88 in life given i rarely use 2600+ cas8...

thanks I will try to translate that into ivy/haswell lanuages but it goes fine I think tddWrTWr = tWRWR dd in haswell terms tsrWrTWr = TWRWR I guess tdrRdTWr = TWRRD dr etc overall i have much lower values, except for first three 8 8 14 which I have at 8 8 8 , and derived form the auto. the 3 values i haven t lowered yet. would you share your secondaries, I am interested in tWR in fact. currently at 8. it does1800 mhz with at the moment : 6 6 5 17 1t 3 56 8 3 20 3 5 5 for 2ndaries, as listed in asrock configurator order spi32m did 18 loops out of 24, not far from the stability bump at 1.78 V

Hi Folks, I am looking for a "good" tight set of subtimings for DDR3 Elpida Hypers, run on air. For some Dom GT and Kingston HyperX 2000C8. The 666 18 1t and 777 21 1t, 888 24 1t and alike. I looked, I looked, but haven 't found a screenshot with Asrock timing configurator Thanks. Cheers

if i were you i d start right away on 1150 haswell refresh or regular should do, at 2400 mhz 8-11-8-28-1t with fairly tight followings 4-88-10-4-26-3-4-7 4-5-4-15-5-4-4-4-4-11-11-10 one stick at a time, see if they boot at 1.8 V (put a fan on the ram), then try to pass spi32m.