Splave

Interesting also that one second in really life is like 3s in the video ? (unless it's intentionally sped up). Couple other notes. Using z97 for a reason. If you can afford a 3090 and ln2 xoc gear you wouldn't use this. Perhaps skew bclk is working without error there? As rauf said no rig pictures (random water cooling pic weird) yet has the need for attention doesn't equal out. If a guy taking the time to decently edit this video if was legit would be showing off his sick mods and ln2 setup? As far as I know he would have to have an evc also to oc strix that high? Maybe elmor has sales records? Hopefully 3dmark can do some forensics and figure out whatever hacks being used to trick system info as well as the benchmark. If some random can beat the protections in place, i would just assume others are. Not a good look. There was a early version of this video where it was mocking out jay-z with his own clips of benching 3090. Also it showed a rig pic with an ek water block. That was all edited out. Quote from ocn "+1. I intentionally cut the trace on the PCIE fingers for ground and +12v and routed them to another 8 pin reducing the vdrop along this plane (3x 8 pin on the board, another 8 pin to feed the PCIE - will void your warranty 1000% if you do this but you gain some extra oc stability)"

Rtx crap don't need it ??

Seems that the average clock in system info is much more important than the set clock... Thanks to evc2 power limit reductions. ??

Y'all get free juice? Cheating /s glad you had fun

Nice info. I have been setting minimum to 100mhz less than maximum on freq in over drive. More here https://www.elmorlabs.com/index.php/forum/topic/6900xt-power-limit-tricks/#postid-335

No strange problems yet. On water I get like ocp or something maybe some protection sometimes it hard shut downs the rig. Will see what adding some vgpu offset can do. First time I tried -70 was the limit for temp.

I know who it is https://www.facebook.com/watch/?v=1137289143006604

6ghz nice

efficiency needed

I think for modern hardware 00000 model id cpu's arent allowed if I remember right

there are 11 3d and 11 2d proposed global point categories this sounds even but 5 of the 2d categories are single threaded and dont provide globals for each core count where as 3dmark01 has 1x 2x 3x 4x which does not scale with more than 1 gpu receives 100 points at a minimum for 3x and 4x. thoughts on this? what if we did global 32m or other 3d benches by core count also, 16x 32m 4x 32m ?

$175 shipped usa

Ok well the bclk does float a lot on amd and with HPET enabled especially. Can be frustrating to compete with someone at 5025 whether they even know its happening or not. Worth noting imo. have fun

sorry to rain on the parade, but 10.5 is not secure for LCC. you need beta 3 with effective clock or whatever bclk you boot is what it will report. check pictures below.

nice run

I don't think the bios or agesa will make your cpu mhz stronger. 5ghz is easy on good cpu. I cant make the bios I have asked for it long ago. Please be patient.

$200 shipped USA everything pictured included. Tapped holes and added hole closer to base for probe.

it doesnt fix fabric yet but its strong one in other regards X570TC369.rar

can you use newer than 2.16.7094 bench version 2.16.7113 is out https://www.techpowerup.com/download/futuremark-3dmark-timespy-raytracing/

rumor has it there is an agesa to solve the fabric limits that will be public soon. the aqua runs a beta version of it and is ok 2133. It does not help on cold though, that version of agesa is more limiting on ln2. 1933 vs 1900 max for me on 5800x. should have update soon. have you tried 3.69?

Nice one

Gone thanks!

Nice benching lately :D

some yes

8ghz congrats