bartx

Price drops: Foxconn BlackOps - 110 euro Kingston 2133C8 Kit1 - 60 euro Kingston 2133C8 Kit2 - 65 euro Buffalo Firestix - 25 euro

I can deliver you the most difficult parts, assembled and ready for installation (evap, suction line, mounting kits) and provide some guidance about the rest of the parts which will be needed. The work which you need to do: - mount all the parts on the base plate, make some electric connections - bend a few copper pipes - braze the pipes, the most difficult part is to braze pipes to the compressor, you'll need quite powerful torch to make it properly - charge the unit with gas and tune it for the load, to be honest it's good to have a load tester, but it can be made from cartridge heaters for the cheap + copper part, which I can also prepare

Prices don't inlude shipping costs, which are usually 5-25 euro worldwide depends on weight and location. PayPal gift or money transfer accepted. Foxconn BlackOps - mint condition, 100% working. I cleaned the original NB heatsink and applied fresh Arctic MX-2 on NB. I/O shield and sound card, guarantee not DOA. 125 euro I can make a cover for the NB heatsink, because original one is missing. It can be made from copper, brass or acetal (for additional 15 euro) with 1/4 threads. Biostar Tpower i45 - good condition, original PCI-E jumpers are missing, board only. Cleaned heatsinks, new thermopad and MX-2 on NB. Board only, no accessories. Guarantee not DOA. 50 euro Kingston HyperX 2x2GB 2133MHz CL8 Elpida Hyper - two sets available, perform similar although Kit 2 needs simply less voltage for 2200CL8. Guarantee not DOA. Kit 1 - 70 euro Kit 2 - 75 euro Kit 1 Kit 2 Crucial Ballistix 2x1GB 667MHz CL3 Micron D9, 100% working, guarantee not DOA. Quick test on Biostar - 1000MHz CL4 @ 2.4V 15 euro Buffalo Firestix 2x1GB 800MHz CL5 Micron D9, 100% working, guarantee not DOA. Quick test on Biostar - 1000MHz CL4 @ 2.4V 30 euro

sold

80 euro + shipping

bump, still available

I'm looking for appraisal for this stuff, of course condition is working Asus Marx GTX 760 (full box) Foxconn Destroyer (with I/O shield) Biostar Tpower I45 (oem)

Asus Maximus III Formula. Good condition, pulled from daily rig, never been on cold. Accessories as pictured (I/O Shield, sata wires, Q-connection, manual, some stickers etc.), sound cards is missing. Small damage on SATA port. Guarantee not DOA, I made only a few tests on i7 870 and Hypers. Looking for 90 euro + shipping (10-20 euro depends on location). I ship worldwide. PayPal gift or money transfer.

110 euro + shipping

150 euro + shipping

For sale never used Asus Rampage III Gene motherboard. I got it from a man who bought it as a spare one for his server and never used this board. There are no sign of dust or wear, because board spent couple of years in the box. I only replaced the battery. Two sata wires are missing (originally there were 4 pieces, I have only 2), rest is in the box. Board is in 100% working condition, guarantee not DOA. I'm looking for 200 euro + shipping (15-25 euro, I can ship worldwide). PayPal (gift) or Bank transfer

115 euro + shipping for Rampage II Extreme

REX sold REX II left

2x1GB Dominators - sold

For sale Asus Rampage Exteme I & II boards. Both in mint condition, never tested on cold. I replaced the thermal paste below the heatsinks to MX-2 and made short tests. I probably will have I/O shield for Rampage II, but I cannot guarantee that. 2x1GB Dominators - D9 GTR chips Prices: 1. Rampage Exteme X48 - 125 euro (I add E8400 for free) 2. Rampage II Extreme X58 - 125 euro (I add Xeon 5506 for free) 3. 2x1GB Corsair Dominator 1800MHz CL7 - 30 euro Payment via PayPal (gift) or bank transfer. Guarantee not DOA. Cheap shipping - 15 euro for one board for EU, US and Canada, might be a bit more to other countries. Contact - PM only, please don't write messages in this topic, because I don't get notification about them so, I won't answer.

Sold, please move. Thanks for the space.

650 euro + shipping

For sale is single stage cooler with 20000 btu rotary compressor. Unfortunately buyer haven't picked it up, so I have to make a listing here. It will be my last cooler, I run out of gas and I'm not going to buy a new bottle. All parts are of course new, quality as always Picture on load tester means holding 400W dummy load with -47C on evap top and around -31C on the load tester (probe between the heaters). I think delta can be lowered using better thermal paste than MX-2. Unit can hold 400W in constant load and more for benchmarks. Normal price will be 750 euro, I'm looking for 700 euro including GPU mounting kit (which costs 40 euro itself). So it's 90 euro discount. Local pickup in Poland welcome (Silesia region, near Czech and Germany border), I can drop a price to 650 if unit will be picked up personally. Shipping to EU only, cost around 100 euro, depends on location. I'm going also to sell the load tester with regulation 150-600W if anybody is interested at example for cooler/water blocks testing.

1000 euro

For sale is Autocascade, which I made couple years ago. It's still working, charged with CO2 and holds around -65C @ 260W. Due to problems with captube clogging by CO2 (it's CO2 issue, not a cooler issue, I haven't had access to Ethylenne couple years ago), I can offer this cooler rebuilded (charged with Ethylenne and R600A with new suction line and new evap). I think after that modification it would be able to hold 300W load at -90C area. 19k btu comp with 1kw power consumption and size of the single stage (it's only taller). Expansion tank and plate heat exchanger between stages. Anybody interested? I'm looking for 1200 euro for rebuilded cooler + shipping. Shipping also is a big advantage, because it can be shipped as 70kg package within EU (around 70-90 euro cost). It will be available for around a month. Then I'm going to return the Ethylenne bottle and it won't be possible to buy it rebuilded. And some pictures from build:

bump

bump

UPDATE Cooling: 1. RAM Pot (nickel plated base, anodized alu extensions), for Dominator mounting holes - 60 euro (4 pieces) 50 euro 2. NB Pot (with bracket, backplate and mounting holes) - 40 euro (2 pieces) 25 euro - 1 sold, 1 pending payment 3. CPU Mounting Kit for phase change - 50 euro (3 sets) 4. Anodized alu backplates - 10 euro (3 pieces) CPU: 1. E8400 Q820A http://hwbot.org/submission/2487642_bartx_superpi___32m_core_2_duo_e8400_8min_20sec_906ms Results has been done on autocascade in -70C temperature with poor old evap design. 50 euro + shipping 25 euro + shipping 2. E5200 Q839B http://hwbot.org/submission/2452809_bartx_superpi___32m_pentium_e5200_8min_59sec_953ms Golden CPU, perfect for make some good LN2 runs. It has been delided (indium below IHS). I can make an IHS for it for the buyer (included in price) 50 euro + shipping SOLD RAM: 1. Corsair XMS3 1800MHz CL7 D9GTR - 50 euro + shipping 30 euro + shipping pending payment 2. Geil Ultra 2x256MB PC4000 - 20 euro + shipping 10 euro + shipping pending payment 3. OCZ PC3200 2x512MB Gold Edition, very low serial number, according to the info in the internet, Winbond BH-5 - 50 euro + shipping 30 euro + shipping 4. Kingston HyperX PC3500 2x256MB Winbond BH-5 - 40 euro + shipping 25 euro + shipping 5. Goodram Pro 2x512MB 533MHz CL4 Micron D9GKX - 30 euro + shipping 15 euro + shipping All the markings on the IC are shown, you can find some info in the internet about those. Prices does not include shipping costs. I've got very good rates on overseas shipping (UPS), I can also ship via post. All items guarantee not DOA.

ANOTHER PRICE UPDATES Cooling: 1. RAM Pot (nickel plated base, anodized alu extensions), for Dominator mounting holes - 60 euro (4 pieces) 50 euro 2. NB Pot (with bracket, backplate and mounting holes) - 40 euro (2 pieces) 25 euro 3. CPU Mounting Kit for phase change - 50 euro (3 sets) 4. Anodized alu backplates - 10 euro (3 pieces) CPU: 1. E8400 Q820A http://hwbot.org/submission/2487642_bartx_superpi___32m_core_2_duo_e8400_8min_20sec_906ms Results has been done on autocascade in -70C temperature with poor old evap design. 50 euro + shipping 25 euro + shipping 2. E5200 Q839B http://hwbot.org/submission/2452809_bartx_superpi___32m_pentium_e5200_8min_59sec_953ms Golden CPU, perfect for make some good LN2 runs. It has been delided (indium below IHS). I can make an IHS for it for the buyer (included in price) 50 euro + shipping SOLD RAM: 1. Corsair XMS3 1800MHz CL7 D9GTR - 50 euro + shipping 30 euro + shipping 2. Geil Ultra 2x256MB PC4000 - 20 euro + shipping 10 euro + shipping 3. OCZ PC3200 2x512MB Gold Edition, very low serial number, according to the info in the internet, Winbond BH-5 - 50 euro + shipping 30 euro + shipping 4. Kingston HyperX PC3500 2x256MB Winbond BH-5 - 40 euro + shipping 25 euro + shipping 5. Goodram Pro 2x512MB 533MHz CL4 Micron D9GKX - 30 euro + shipping 15 euro + shipping All the markings on the IC are shown, you can find some info in the internet about those. Prices does not include shipping costs. I've got very good rates on overseas shipping (UPS), I can also ship via post. All items guarantee not DOA.