bartx

Sold, please move

Pending payment

Please send me a PM's, I won't get a notice if you only leave a reponse in a thread. Thanks

Gigabyte EP45-UD3R in mint condition, pulled from daily rig. Rev. 1.0 with latest F12 bios. Guarantee not DOA. Shipping worldwide. Paypal or bank transfer. 60 euro + shipping

sold, please move

Looks like GRIFF was first... (according to PM).

Rampage Extreme X48, all what I've got is on the pictures. Board has one little damage - one pin in the socket is broken (broken, not bent). I checked in datasheet, it's VID0 pin (see VID table), board works fine, set voltage is equal to the real voltage - no idea how it works, but it works. Board is not tested in terms on FSB, it hasn't ever been on sub zero, pulled from daily PC. I'm asking 90 euro + shipping, what is good price I think. Guarantee not DOA. Paypal preffered. Shipping via post or DPD (in EU).

bump, P5E3 Deluxe and 7900GS are gone

offers welcome

P5E3 Deluxe sold

2x2GB Dominator GT 2000MHz CL8 - PSC two sets, each 2x2GB for 30 euro + shipping from my experience, they're rather average, but I haven't tested them for clock capability. Guarantee not DOA. Modded 7900GS, mods list: - vmem mod - 8800GTX VRM with connected vsense directly to the back of the core - two additional capacitors - removed Primarion chip, which was responsible for OVP at ~1,8V One result, which I made on this card is below. Consider that, it has been done on HR-03 + 120mm fan Guarantee not DOA. 50 euro + shipping bartx`s 3DMark2001 SE score: 87060 marks with a GeForce 7900 GS 8800GTX vrms... 3 of them were made for my friends, who never picked it up... I'm looking only for return of my expenses. 30 euro/piece including wires (8GA) VGPU is working, VMEM needs removal of one resistor, which I'll do before shipping. They need vsense to be connected to the card - I'll provide the schematic. Boards don't have any short cicuits - cut using endmill on my CNC. 8GA wires - 2 euro/1m, I have couple meters I think P5E3 Deluxe @ 660 FSB, mods list: - vcore mod - cap mod on the back - P5E3 Premium bios - voltage display (very convinient, especially with P5E3 Premium bios, which can mess vcore) 75 euro http://hwbot.org/submission/2498457_bartx_reference_frequency_p5e3_deluxe_660.28_mhz Prices does not include shipping. Bank transfer preffered, paypal gift is fine too.

It can be done with 150$ hot air station and 25$ electric grill as a heater. Trust me Good flux, bunch of stencils and 60%tin/40% lead balls with proper diameter. It's not magic, just need some attempts and patience. Took me a month, day after day, to gain skills to resoldering gpus. Point is, that chips have factory defect. Reballing will help only for a while. That's why I forgot about it. You're doing the card and after a month it's a dead again. Sometimes it won't help at all.

I was doing it for some time, reballing and chip resoldering - couple years ago. Problem with those chips is, that chip is damaged itself, not balls below it. It may work for a week or two after this operation and die without any reasons. It would be better to replace chips from working reference cards...

Hi, I was wondering how much EP45T Extreme can be worth... I'll have one for sale in a few days. Any suggestions?

Me too I use Cu ETP, 99,9% pure copper. There is purer alloy CuOF (99,95%), but it's for sure more expensive and I'm almost sure that Intel won't use it in mass production due to price.

First post updated

I let him know. He's friend of mine. Hopefully he will contact you guys

In case of casting, they should have some marks from ejector pins and mark in the place, where metal is injected. Like injection moulded parts. I'm not 100% sure, I was designing plastic automotive parts for some time, but never any die casted metal parts.

Exactly, thanks for that info. In my opinion IHS are stamped from huge copper sheet, just looking how the edges look like. It should be the cheapest process. Probably couple companies make them all the time, as long as they pass quality control and assumed tolerances it's all good.

According to some reports and my knowledge I think that quality of standard IHS may vary - remember that it's a mass production, so they have some tolerance range in dimmensions, flatness and surface roughness. Not to mention, that spare IHS will for sure help keep all the markings on original IHS intact

Please put some comments here if possible how it works compared to standard one. Silver IHS is abandoned due to very high price and most likely worse results than copper.

First post updated about availability.

bump

Thanks for such very kind words. I'm sending you a PM right now. All rampots are gone, rest is still available, 1 or 2 IHS also should be available too.

Deal of the day - rampot + copper heatsinks - 10 euro discount from total price (90€ + shipping) Two rampots left