Leeghoofd

Verification screenshots contain CPU-Z tabs for CPU, memory and motherboard and SPD tab for each Dimm. Don't forget them SPD tabs plz!!!

Verification screenshots contain CPU-Z tabs for CPU, memory and motherboard and SPD tab for each Dimm. Don't forget them SPD tabs plz!!!

Verification screenshots contain CPU-Z tabs for CPU, memory and motherboard and SPD tab for each Dimm. Don't forget them SPD tabs plz!!!

Verification screenshots contain CPU-Z tabs for CPU, memory and motherboard and SPD tab for each Dimm. Don't forget the SPD tabs sir

removed sir

The museum one is is not always up, so we left the option for the two... again the mega NZ DL works fine here. Hopefully in November we will host the files ourselves...

This benchmark result has been flagged as inaccurate.

Mising motherboard tab sir

A VALID UL benchmarks verification link of the FULL run is required!

Compo background Stefan!!!

A VALID UL benchmarks verification link of the FULL run is required!

Plz ensure the UL verification link is not hidden plz

Would love to see the rebenched version with CPUZ tabs for CPU and Memory and a setup picture... 5.6Ghz on water?

Nope that is a dedicated PCIe GPU...

euh that is why it is listed for the ASRock mobos....

Cool Asus, ASrock and Gigabyte battling it out... we need moarrr MSI and eVGA

youu can just submit a better score, the old one will be archived

no problem here for the Mega NZ download... anyway once we are on the new hosting we got plenty of storage capacity so most benchmarks will become downloadable from there.

Result is hidden sir

n UL benchmarks verification link registered on your HWBOT name is required

Plz use the official wallpaper to enter the competition plz

plz use official wallpaper, thank you

not using the official wallpaper

Missing VALID verification link sir

I would strongly suggest to update the Bios version on non OC'ed settings to version 1.3 or even 1.4 Normally 9 x 333 with Ram at 1333MHz should be a no brainer... However the ASROCK doesn't support Cas 11 Follow these steps for the OC TWeaker Bios page and see if it boots and is stable 1) Set RATIO CMOS Setting to 7 (later you can move up to 9X mutliplier ) 2) Overclock Mode to Manual CPU Frequency to 333 PCIe Frequency to 100 3) After setting the above set the DRAM frequency to 1333 4) DRAM Voltage to 1.55 5) Press F10 Save and reboot