nachtfalke

Sold , thanks for space.

for sale 2 x 16GB Kingston Fury Renegade DDR5 RGB A-Die 7200 cl38 KF572C38RSAK2-32 this kit is able to do 8k+ with tight timmings , tested few hours only , was tested with Z690 Tachyon only ( no other board here ) .. i wanted the price that i paid for , buyer recieve invoice aswell .. Disclamer : no returns and no warranty from me , results can be vary from user to user , from board to board , cpu to cpu as you know .. price : 350 € , buyers pay the shipping , and the payment fees , i accept paypal / bank transfer https://hwbot.org/submission/5152228_nachtfalke_geekbench3___multi_core_core_i5_13600kf_(6p)_63741_points

8400 easy peasy for tachyon with right mem settings !!!

8200 full stable , geekbench aswell ... 8400 same timmings /voltages was able to pass one run of 7-Zip , need to play a bit more ... but board behave ok . i hope the GBT team will make a bios that is good for all 2D/3D( amd cards issue ) , because now i´m switching always between x4b and x6h .

your cpu is an KF not K, wrong submitted

Update bios for several times till you saw " bios update do not turn off or reset mainboard" or something like that , thats happend after you flash the bios via bios flash back , after update mainboard will starts from alone and give you that message , just waiting finish the update and all will starts normal . I think some oc settings pushed to limits in the ddr tab will corrupte partial the firmware. But nothing bad just patience.

hi , well score is a bit penalty think is a bios issue using legacy cards anyway closed .. the evaporator without eclosure only block is aroung 0,6kg ... but in a flow metered container , not mass/weight is important for holding loads

thanks , i just remove a bit the dust from the desk , this cpu gen is amazing in term of clocking/perf . besided that i wanted to test my latest unit in real loads to see how it´s behave .

nice run , actually is a bios problem running legacy cards on Tachy ? or is a issue for all Z690 lineup not only GBT ? i´m aswell penalty in some 3D frames are much lower as it should for the freq that i play .

thanks, cpu´arent very good clocker normaly should do 7300 on this ccoler i´m in searching for better cpu.

that is not CB2003 upload , is CB R20...

i mesured the bios battery CR032-3V and was 3,1V so i change it with brand new one 3,3v but same issue , so before was all ok thats way can´t be my PSU or other hw parts , is something that change in the bios ..anyway after 3 years of xoc pause i touch for first time in last 3 years an xoc board , cpu is not really good as the x4b bios say only 79 biscuits , test are on cascade cooling ! i have only one stick of DDR5 , as i wanted A-Die , i brought that stick only to start the platform

hello , i have some issue with Z690Tachyon /13900k/kingston6400cl32... after i loaded the memory profile for M-die ( from first post), board now behave strage , after i shut off the psu from power switch and start sistem again at boot will not post and debug display led is off , all led´s on mb lit , fan spring but no post , after ~ 15 secondss if i pres again power button from MB starts normally . i updated again X4b bios and F20 ( from official website) via Q-Flash from bios or via dedicated usb flash back port , but same issue .. what i did wrong ?

nature seems very low , it´s an board/bios issue ?

You are not from EU , here are strict rules about using refrigerant without licence. From 01.01. 2020 all refrigerant that has >(more) than 2500 GWP(Global warming potential) are forbidden. That mean R404A and R507 are from this year forbidden...if you are discover that you use any Kind of refrigerant without licence you will pay fine. Read more about. Any site actually that encurages using reftigerant without licence will be passable to pay fine.and will be Not cheap. I work in refrigeration domain, i have licence ...and we are called to school how to use the new replacement refrigerant , R404a/r507 has replacement R449a for Midlle temp application and R452a for low temp application. The hole refrigeration industry are on change , what other people make is not my bussines, but please stop to encurages people using illegal things.( section 608 EPA ) https://www.refcom.org.uk/resources/refrigerants-banned-from-use-as-of-1-january-2020/

We arent gas dealers, ask your regional gas dealers for that gas. Prehaps you already know (or not) that is hight flammable gas and hight pressurised cilinder. It is included in the A3 saefty gruppe. That mean is very dangeros., it need special shipping and Papers. Minimun irder quantity is 3,7kg of R1150 mean 10L bothle, use special H2 pressure regulator with left thread hands. Using refrigerant without refrigeration licence is totally forbidden.!!!!

I have Q822A408 , but is no2 in mine bin method , best one is Q828Axxx

very nice for SS , you need an REX or P5E3 Premium ,Board that can do CR 1T , better 32m effi.

well is not Vapo anymore , only that case :D:D

1) sold 2) sold 3) sold thread can be closed! thanks hwbot for the space!

2) 2x2gb Corsair Dominator 2000c8 (s/n 10232685) - part of tri channel kit but ONLY 2 sticks are available - tested for 2000 7-7-6 1T spi32m at 1.65v bios , RE3 - available

yout GT4 ( nature) is buggy bugged please delete your score!!

1) sold 2) available 3) sold

3) reserviet 2) available

Item 1) sold Rest available