nachtfalke

awesome work Bullant

nice job George , very impresive for a msi board:)

nice:)

yes=)) , the intresting part is for 6650 this cpu need 1.88v, but for +35-37mhz(witch is max bench 32m on this cip )need 2v , anyway haswell is on corner ...so dont need anymore ivy:D

thanks , was not enough nitrogen and for mem , but good old samsung is the best solution for stock air:D

Kabumm!! Mandatory pic required:D

Thanks:) @George- i have one dimm too from another tri channel kit ...but only one:(, it is PSC XED he ran 2600 8-12-7 twcl6 1,84v / 2666 8-12-7 twcl7 1,89v all stock air.... need try on cold:)

check temps with aida64 or real temp.... check also in bios sensors temps if is ~idenical with software read

yes, on air they are garbage...for sure they can run tRAS set to 24 , tRTP 4...

tri channel kit , i had only 2 modules...PowerChip XEH ICs... work on stock air 1300 8-12-8 twcl7 1.950 32m ...so today i decided put them on LN2 , after a session with BBSE 2133cl8 ..was not so good 1327 6-10-6-26 twcl6 2.14v full stable -130c/Kingpincooling Ney Pro Pot -awesome pot Maximus V Extreme -bios 0021 - good board for mem clocking cpu 3770k/single stage -45c i will rebench soon for a better wazza score:) KPC ney pro pulling down

which is the voltage limit on air to this kit? i ask because i have too g.skill2133cl8 ...but if set in bios over 1.85v , platform fail to boot , if i set in windows -directly shutdown .. i will try in weekend this kit on LN2, maybe with cold the voltage limit increase over 2v...i hope:)

extreme cooling is that cooling that is NOT dependent of ambient air cooling/watercooling is dependent of ambient temperature

i use hw voltmode -it´s only way that dont trriger OCP

nice run

i hope the alu part is anodized and the cooper base nickel-plated!

is compatible with only 1155lga?

if you have selected in bios pci gen2 ..or auto( in your case that is pci gen2) you have in gpu-z this configuration: PCI-E 2.0x16@x16 1.1 ( in idle ..in load is 2.0) your GPU is 1.1 overall... anyway nice score...

pci gen3 is not compatible with RV790.....

yep , while the pci express is 1:1....but the performance is poor......

not yet , i´m very bussy with my job...i will test them very very soon with LN2 i tested one with single stage ~ -38 degrees

yep, imc it is very important with some latency.. i can also run 32M - Twtr set to 4 with this IMC ...and compared with another cpu´s imc ( that i tested) on this cpu i can run less v dimm , about 15mv less at same freq/latency

yep , 5ghz both!!

another two 3770k cpu´s batch# 3229Axxx both seems have same behavior on air: 32M pass 4c/4ht-1,280v only difference it was the IMC : one 1520 and another 1540, i will test soon both on LN2 http://valid.canardpc.com/show_oc.php?id=2722681

my TridentX 2666cl10 1400 9-12-12-21 /32m only 1,880v, with 1,9 i can run 32m but trrsr4:)

use w7 + 9.12whql ..will see 3-4k boost:D in 2k3