-
Posts
1523 -
Joined
-
Last visited
-
Days Won
36
Content Type
Profiles
Forums
Events
Blogs
Posts posted by TASOS
-
-
14 hours ago, ogblaz said:
Changed the compressor to a rotary one from AC.
Also changed the captube from ~0.6mm(2.5M) to 0.8mm(1.8M) . I think the evaporator is chilly1 design. Had to solder 4 times the evap, always small leaks sometimes here sometimes there... If I would do it one more time I would desolder the evap, clean and solder in one go.
On the numbers side now from the wall power draw 380-400W this ss can hold around -36°C . At lower loads it holds ~-45°C . The gas is R404 500g.
All above 430W the temperature slowly rises to +0°C . On the pressures low side at load 0-0.5bar, on high around 12.
I don`t think I will change the design or make any more changes because it takes too much time.
Thanks, Blaz
Reposition your filter (dont place it flat)
Try to give it at least a couple of degrees angle.
-
-
Hi everybody
Selling my Aopen i975Xa-YDG.
Full box , unused , excellent condition , collection item.
https://drive.google.com/drive/folders/1FjCHZErQ3V0U0F2SjcTf_2F19I6a4myR?usp=sharing
Asking for 400.00 euro plus shipping cost.
This board is also advertised elsewhere.
- 1
-
ALL SOLD or not Available
Asrock OC Formula Z97 and Z170 series , along comes that special version Z170 with DDR3.
All boards are slightly used , excellent condition and full box with everything in it.
Stored and kept as collection items.
https://drive.google.com/file/d/16fp6xv9Sj9KtWmvJ-qgdPj6zPJ86gpFj/view?usp=sharing
Asking as a bundle price 700 euro , plus shipping cost.
The Z97 board is no longer available.
Bundle sale is 1st priority.
Offers for single items will be considered , if the price is right.
-
Hi everybody
I am selling some nice Asrock OC Formula Z97 and Z170 series , along comes that special version Z170 with DDR3.
All boards are slightly used , excellent condition and full box with everything in it.
Stored and kept as collection items.
https://drive.google.com/file/d/16fp6xv9Sj9KtWmvJ-qgdPj6zPJ86gpFj/view?usp=sharing
Asking as a bundle price 700 euro , plus shipping cost.
Bundle sale is 1st priority.
Offers for single items will be considered , if the price is right.
- 1
-
The board is reserved at the moment for a Hwbot member.
-
Corsair Dominator (SOLD)
Along with the board , a nice triple channel 6GB ram kit , built with the well known Elpida Hyper chips.
Asking 120.00 euro plus shipping cost.
Accepting PayPal F&F or SEPA payment
https://drive.google.com/drive/folders/1Z3n0kOxKowoi-nFoAg1ereCdlty6xj1y?usp=sharing
-
Selling a Rampage Extreme , in non-working condition (bent broken socket pins) , for parts or repair.
This is one of my ex- cascade , LN2 boards , where solid caps and two chokes are moved into the back side of the pcb , for easier mounting of extreme cooling devices.
The board has cpu socket damage as you can see in the picture
It can power on , but no boot (00 error).
https://drive.google.com/drive/folders/159t0s1Ukl3oBa9Th-SEaB8PM4KGiL8LP?usp=sharing
Asking 50.00 euro plus shipping cost
PayPal F&F
-
Selling two of my HD5870 Lightning , cards only , in very good condition.
For people who dont know , these are OC version vga's.
In this sale there is one Lightning version and one Lightning Plus version.
* I have retrofitted the regular Lightning , with an original Lightning Plus cooler.
The Lightning Plus version , were mainly Japan only market and had a 5 heatpipe cooling instead of 4.
Asking 140.00 euro for each card plus shipping cost.
Accepting PayPal F&F or SEPA payment.
https://drive.google.com/drive/folders/1SjhLPVVvFh9RnJaLRD5FQB_ClFsggEnX?usp=sharing
P.S.
These cards will go on sale to other places/forums also , a week after my post here.
- 1
-
N260GTX Lightning
https://www.msi.com/Graphics-Card/N260GTX_Lightning/Specification
Selling my GTX 260 Lightning , card only , in very good condition.
For people who dont know , this is a special version OC vga with 1.8G Vram.
Asking 170.00 euro plus shipping cost.
Accepting PayPal F&F or SEPA payment.
https://drive.google.com/drive/folders/1SjhLPVVvFh9RnJaLRD5FQB_ClFsggEnX?usp=sharing
P.S.
The card will go on sale to other places/forums also , a week after my post here.
-
Big Bang-XPower X58
https://www.msi.com/Motherboard/Big_BangXPower/SpecificationSelling my Big Bang-XPower , in excellent condition , full box with everything in it , collection item.
Asking
370.00320,00 euro plus shipping cost.Accepting PayPal F&F or SEPA payment
https://drive.google.com/drive/folders/132uBPbjOXfA6hCjHFRyDSda_eZJVQU_D?usp=sharing
EVGA X58 SLI Classified (broken) for parts or repair.
This is the 170-BL-E762 version.
Ex LN2 board , Vmodded , long stored as in working condition.
Uppon recent test , it power's on but the boot stops at 7F with one long and two short beeps (video).
https://drive.google.com/drive/folders/1GTJ826P3kQCX5czlb63sA4tiBjFr8uIW?usp=sharing
Asking 50.00 euro plus shipping cost
PayPal F&F
Selling two of my ABIT Fatal1ty series , collection boards.
The AN8 and AN9 32X
Both full box , excellent condition.
Rare boards , these days.
https://drive.google.com/drive/folders/1OD1XJ5SnvkcG7QqSpTuTXkalllelvVzT?usp=sharing
Accepting offers at the moment.
EVGA X58 3X SLI Classified
Version 141-BL-E760-E1
Selling here the best X58 oc board , ever made. (this is not only personal opinion).
Full box with everything in it.
Extra and included in price the EK full cover block.
Extra and included in price the EVGA oc panel.
https://drive.google.com/drive/folders/1FkidbmkCpSpKPrKTh-yU5cOsLusm67F1?usp=sharing
This is an EX-LN2 and cascade used board , that was kept as collection item , but now has to go (i hope to the right person).
Board is recently booted and checked working state.
You will get it as you see it in the pictures with the insulation and the backside heater attached.
This specific board had some love and care from an old friend (aka hipro5) as you can see from the pictures.
Asking for
400.00350,00 euro plus shipping cost for the set.Accepting PayPal F&F or sepa payment.
old school Dry Ice cpu pot.
Aluminum tube (40mm inner diameter) with 50x50mm nickel plated base.
Base height 55mm and total length is 24cm
Can also be used as a chipset pot for X48,P45 or others.
https://drive.google.com/drive/folders/118fsRWeV22bdpbVUEEiaEp-h_St96KZB?usp=sharing
Asking for 70.00 euro plus shipping cost.
Accepting PayPal F&F or sepa payment.
a special LN2 pot made by der8auer.
A hybrid pot for use on cpu or vga , a heavy beast of pure copper.
https://drive.google.com/drive/folders/1w6v5g9Izz_l5ewrnj3LYH5JX6nw5B5XG?usp=share_link
No price tag on this LN2 pot (for many reasons)
Happy to receive offers in PM
-
Offer sent and accepted by filmbot.
Money received.
I will prepare your parcel tomorrow and send you the tracking number in PM.
-
7 hours ago, Kashtan said:
First - a Prometeia?
My personal opinion as a user of both , yes Prometeia was better mainly cause of better cooling performance.
Tested both when they first released , many many years ago.
- 1
-
Well done , lads !!
-
Congrats for this super score.
The description of your result says it all.
-
10 hours ago, Mr.Scott said:
Correct. Rampage III Extreme.
Thanks Scotty
That board is long gone (for me).
Anyone know if there are any other boards that can make use of it , or if there is any other usage of this device in more recent boards ?
-
I am re-organizing and re-locating my old hardware stuff at the moment , and i came up with this device that i cant remember which exact board used it ?
I am almost certain it's from X58 era.
All comments welcome ?
https://1drv.ms/u/s!AvKRuIZpy45rglb0mCpk7KBUmKw7?e=B7UZyu
-
Learn the hardware specs , limits and tolerance of your phase change hardware and parts.
Read some theory ... and then experiment by yourself.
- 1
-
Both at Twitter from @wxnod
13490F = ?
13790F = SRMBZ
-
6 hours ago, jestiferhenri said:
Greetings! I just bought a VapoChill LS which still is in a really nice condition. I've connected it to the USB port of my main PC to set up the VapoChill. But unfortunately, i can't find the software. Even after 2+ hours of professional google abuse. Does any of you guys still have a dusty copy of this software? If yes, then please share it with me.
Thanks & Regards
Jestifer
New username ?
Anyway ...
Check post #12
https://forums.overclockers.com.au/threads/vapochill-lightspeed-software.1234178/
-
Super score !!!
- 1
-
Nice Phase Change , collection.
-
-
Nice clocks !!!
Especially that mem clock looks really good.
Never heard of that benchmark before , when did that comp started ?
Single stage build. Old parts used (2023)
in Phase & Cascade overclocking
Posted
Just to get an idea of how "factories" positioned these
No performance gains from this , just safety.
https://www.pcstats.com/articleimages/200505/promach2gt_side6.jpg