raiden

Nope, not really. You can measure delta between load and idle pretty accurately but I’ve had temp readings colder than my evap temp on A64.

Congrats! Really strong score and great efficiency.

Good to know. Never heard of this before. I assume sweet spot is different for every CPU?

My 661 hates SPi as well. Runs wPrime 32M and PiFast at 200MHz higher than 1M.

Why would it need globals? In that case GPUPi 1B, X265 or CB20 would still work but will be a pita to run. 😂 Also regarding the dogpile stage is per socket considered to be determined by Board or CPU socket?

Yeah pretty obvious. Should be more like 120k.

Maybe switch to wPrime 1024M? For NVIDIA Stage 1 I think GeForce 6/7 would be nice. Considering especially GF6 tends to be expensive making it only one score per GPU core would make it more affordable. E.g. GeForce 7 Series: 4 scores, 1 score per GPU, G70/G71/G72/G73 GeForce 6 Series: 4 Scores, 1 score per GPU, NV41, NV43, NV44, NV45 Bench wise 3D 2001SE might be fun but would probably require come kind of CPU limitation. edit: One could also allow Quadro GPUs as those tend to be less expensive.

It almost does. AMD got DDR2-DDR5, Intel starts at DDR3.

ATI/AMD: 3 Scores X1000 Series 3D05? Probably no need to run 13th/14th gen even tho it’s 05 and plenty of models with similar performance to choose from.

Could also add GTX 560 Ti 448

Fortunately TaPaKaHs binning info from back in the days was pretty reliable. :D I’ll probably test it on dice this week and LN2 end of comp.

Thanks a lot. Finally got G4 to run using Slot B and proper voltage settings. Freezes at round 10200 so next will be testing different IMC voltages

E cores enabled? Might wanna edit that to regular 14600K

Thanks. It’s by far the best QX I had over the past years. Did even 5.5G on Asus P5Q but that was on win7 so slightly slower. Will certainly bench that one again.

Nice. FSB or actually CPU limited?

actually real P4B doesn't support setfsb and so on as well. No need to spend any money on it. I'm also stuck at 200MHz :(

@GRIFF: 265MHz 1:1 2-2-2-5 32M, 1M using dividers 285+ is possible. 1:1 1M I’m stuck at 270 as neither my D43 nor AT-6 will go beyond that.

Just in case anybody wants to give those 300MHz a try as well: CPU interface set to optimal, “L” preset for alphatimings, DFI 12/18 romsips. Also in order to go beyond 299MHz I had to lower Vcore and APIC off obviously.

Tried every HWInfo setting available, even deleted the dll completely. No change so far. Legacy on XP runs just fine but that’s like 2 minutes slower so no real option. On Win7 Legacy also crashes saving the result. Debug log shows GPUPI crashing when collecting DRAM information so basically same cause as for HWInfo not running. I also tested every Mem setting and three different vendors without success. edit: 3.1.1 runs just fine. Using HWInfo.dll from 3.1.1 to replace the 3.2 one works too. So there is a work-around afterall.

Any chance to compete in Stage 3 with GPUPI crashing when saving results? Right now I can't seem to be able to save any result (oc, non-oc, XP or Win7 x64) when running my K8N-DL and Benchmate wont work either as HWInfo seems to not support K8N-DL at all.

Subbing an AMD CPU for CC Intel CPU frequency stage doesn’t really make much sense, does it?

Are Opteron CPUs on S940 allowed for Stage 3? Otherwise ppl will be stuck with FX CPUs.

Regarding the AMD single core GPUPI stage I think making it one score per socket max. would be a good idea. Else everyone will go for AM2 and maybe 939 anyways.

Which Stepping/Batch is this? Having trouble with my 152 under Phase Change at roughly the same speed as well.

1900MHz So when are we gonna see 2GHz?