Thanks once again
Mind my ignorance but would it possible to solder a VR in series between the resistor and CSN and cut the trace/IC leg? I have a dead card which I'm probably going to test it on and due to the resistors size I don't think I would be able to remove them
Looking good mate. Have you wazza and had a look at the thread I posted? If you have not done wazza it could very well get you below 7m and I'm working on a fx 4100 + HYK0 based mems + amd 760g chipset
Thanks for that you confirmed what I was thinking about ocp and what would I do to increase the resistance as wouldn't adding a trimpot decrease it?
Edit: The only thing I can think of is replacing the resistor with a trimpot and csn1/2 both read 2kohm
Sorry for double post but I have included the tested and proven mods (by me) for a reference sapphire hd 7750
I've include link to my imgur album with full res as hwbot has a size limit http://imgur.com/a/VfN6E
Ps. I really need to know how to do a OCP/OVP mod for this card
So what's the deal with water coolers? 2nd in XTU is using an intel water cooler set to 10c and maxing at 96c with 1.7v while 1st is maxing at 68c with 1.75v and he also has his cpu under load in the SS to hide his idle temps. If you ask me this is bull and not very fair to newcomers after massman said no sub ambient
What you really need is something like 2600c10 TridentX with HCH9/HYK0 which are dual sided 4gb sticks. Those low bin kits won't don't very well when put up against something like the tridents because I don't think that the low bin stuff can run at 2800 c9-12-12-14 twcl 6 like the 2600c10 Tridents can
Could someone give me a quick hand on what I would need to do for OVP and OCP mods for an APW7098
http://www.alldatasheet.com/datasheet-pdf/pdf/316993/ANPEC/APW7098.html
Here's some 32m tweaks http://www.overclock.net/t/1249432/super-pi-32m-tweaking-guide
And as for copy wazza I use ocx spi tweaker
And for amd users look here http://hwbot.org/newsflash/2099_the_stilt_releases_bulldozer_conditioner_software_amd_superpi_history_to_be_re_written and here http://forum.hwbot.org/showthread.php?t=86959