Alex@ro

Check that you don't have ln2 mode turned on by accident. Also the temperature difference can be because of too high auto pll termination and standby, put them manually at 1.1V and see if you still have big temps.

A lot of these guys are still active but their main concern is not posting results on hwbot. For example Opb still benches at Teamgroup, fugger does oc at xtremesystems, hiwa benches also but not posting here, coolaler does reviews and some overclock , i guess sofos still benches from time to time at gigabyte but not looking for records at hwbot. Poparamiro sadly is retired, one great overclocker that i am proud we had in our country. Beside matose and mosntru there are also micutzu and sang, amazing overclockers back in the days in Romania: https://hwbot.org/user/sang/ https://hwbot.org/user/micutzu/#mywall

You need the new cable Michal....

Bios 0050 for Maximus XI Apex and Gene, can change BCLK with OC PANEL : Maximus XI Apex Maximus XI Gene A few tips for memory validation from the master himself : " Cpu ratio 16x Cache 16xmin max Dram ratio 5500 Max tweak mode2 cl-24-31-63-3t max out trfc vccio/sa 1.3/1.75 corevcore=1.45 dram v 1.6v pll term 1.5v pll bandwidth level 6 System agent pll v=1.005 Mem controller pll v=1.005 ME state disable Mrc fast boot enable Disable all mem training except: Wr time centering 1d Early wr time centering 2d Jedec wr leveling Receive enable training Early readmpr time centering 2d Senseamp offset training Train ~ -100 to 140c Keep retrying till you get the ‘post code’ 50 stall for some seconds due to me disable Immediately torch mem pot to ~ -80C Usually after training mem needs 70 to 80c You want the max freq you can train pass from start to post code ‘50’ so try to train as hi as possible here. Right after 50 you can quickly press oc panel down bclk about 3~5 mhz before finish post + enter os to boot easier Always use 100mhz bclk in bios so mrc fast boot will always not retrain, for the actual training bclk at any point, be at before or during, just use oc panel to adjust the actual training bclk. When validating: Say you need 104 bclk validation: Open cpuz up bclk to 104 with ocpanel and apply but do not press f7 now, immediately down bclk a 1mhz or some and then apply then press f7 quickly. Because cpuz is slow it will f7 the higher mhz, f7 at high mhz always crash. Always make sure you get the file out or use sync to force flush data to disk. "

Nothing strage here, Aristidis is a old 32m bencher who knows what he is doing, happy to see him back

you should be close to 10k in memory multi, seems you have to tweak more

sold, thanks hwbot

Up for sale are my two cards i received as finalist at galax goc 2018.both brand new as replacements from final. You get exactly what you see in the picture, that means the board only without any cooling. Buyer gets the xoc tools in private Price is 1250E per card, 2400E for both. Price include shipping inside EU, outside please ask before. Payment via paypal or bank account ( preffered) and buyer takes care of fees.

Nice to have you around grandpa, you have to supervise us in sauna =))

You can buy a Apex XI and a second hand Apex X for the price of dark, you have two boards, windows XP, etc. I am not saying that Dark is a bad board however the price is little bit too much for this platform.

So geekbench 3 memory score is it multi-core or the single-score ?

sold, can be closed

#1 sold

Up for sale 2 cpu's from some recent binning. #1 Does 5000 1.13 , 5300 1.29 cinebench on water, did 6730 on ln2 550E shipped in EU #2 does 5000 1.12, 5300 1.28 cinebench on water, did 6800 on ln2 700E shipped in EU Both easy to handle with minimal voltages without cb or cbb, boxed but will shipp without it, warranty on intel website. Payment via paypal or bank transfer.

Nothing you can do, temperature limit. Chip will take more volts and give you more freq once you go lower on temp.

considering these are average or below average retails, maybe 450E ?

sold,thanks for hosting hwbot

900e final price, 380 over a random cpu from shop, easy best of 20

still here

ekwb sf3d cpu pot with normal mounting ( not ekwb one) ==> 140E shipped.

price reduction 950e , top watercooling, almost 6900 r15

second one still here

sold

bump before it goes to german water maniacs

yes, same voltages and rsvd switch work similar to apex x or xi