Alex@ro

Not bad,the DMI mod and hello Kitty hair dryer surely helped

Sounds interesting,i'm in,purchasing the ticket.... L.E You're going to HWBOT World Tour 2016 - Taitra Computex Taipei!

They will be in safe hands oO

It is what it is,i have to work on Saturday evening so i will depart Sunday and arrive Monday,no possible workaround.

Just payed the flight,arriving 30 Mayb 16:45 departing 7 June 23:30 . This is going to be exciting

good e-die for cheap,push 50E and it's yours

not now,bump

Time for a rebench,great performance !

350e will make ut Sent from my SM-N910F using Tapatalk

This is hilarious,u benched without maxmem ,best set of B-die ever oO

We have a winner

The interesting fact is how the crack/thermal paste degradation occurs.On my backup cpu i get classic crack sometimes,i can quick check a cinebench run with realtemp and see positive temps at -150 pot so i know paste has cracked and shut down platform. However my best 6700K has different behaviour , no positive temps in realtemp but huge degradation of clocks,can't bench anything over 5900 ,going over will simply freeze. Also a good tip would be that when u press the lever on the socket i need to seat IHS properly from first try,no matter what. Each time i seated it wrong and did it again without adding paste i had cracks or issues.

#1 payed and sold

Hello folks,up for sale 2 kits of ram i will sell due to my qualification for Gskill finals and future financials needs: 1. 3733C17 B-die Trident-z , best kit of several 3733c17 binned,do 4000 12 12 12 tight as seen in screenshot with 1.90-1 V ,on stick is little bit better requiring only 1.865V Provided enough voltage they can do 4080 12 12 12 for almost every bench. Planned to kept as backup kit ,has to go. 2. 3200C16 E-die got from Sam,one of the lowest voltage needs for 3600c12 c11 i've seen,in my tests they did 4000 12-19-19 1.92 for 32M,even sticks. Prices: 1.220E shipped in Europe 2.60E shipped in Europe Prices include shipping and payment it is to be made via paypal and buyer takes care of fees. Final prices and there will be no discount on these whatsoever,preffering to keep them as backup instead for rainy days.

Just rent a whole plane Sent from my SM-N910F using Tapatalk

Says it's bulk in first post.You can grab accesories like I/O and stuff on ebay easy tough.

I had this issue on other board , check other output,for me one pin from DVI was not making contact,same stuck on 640x480 and black screen,fixed the DVI and cleaned up,all fine. Don't mess with volt-mod in this matter , will not help for sure !

Since time flyes so quick , will there be any benching house/apartment this year ?

I think your wall is caused by the mems or IMC,4133 is doable on Gene and Extreme 1T,did it myself and also Websmile did that on Hero...

Nop,same as stock,can be polished inside if needed but i don't know if height is the real issue for cracking,in fact using what Daniel posted i had no crack in last sessions with no spacers at all . The real challenge is how silver will react to extreme cold .

Bump Sent from my SM-N910F using Tapatalk

Here we go folks,the first 99.9% SILVER IHS to be tested. Bigger mass than original ,should be very interesting to see how it goes on cold and silver's reaction to extreme cold compared to copper. Given silver's higher thermal conductivity 406 vs copper 385 i except a few degrees improvement on water, sort of guaranteed,just need to test if on ln2 there will be any gain and hopefully no bigger crack problems. Will update with new thread once it arrives Big thanks for James@Rockitcool !

up we go

Nice job !!

bump before i decide to binn with chilled water and ask for more lol