websmile

If you are unable to read the rules that are written big at the rules tab which you see when you enter the competiton page it is not my problem, but yours - I could have removed a lot more scores, even though I only checked top 25 bc it is a beta cometition without prices, but if you are unable to follow the general competiton rules, this is your problem and not mine - btw, I edited personally to your team mates submission so that he could at least stay in the comp, maybe I should have removed it as well to have clear cut

I sense an Impact going to greece in nearer future^^ - but who blanked the chatbox?

I see your monster result at an honorable 31st place before moderation - maybe I delte some results and you can enter top 30^^ I made a eaw and generous check, overall ranking needs to be recalculated though. I handled this is the way it was intended, beta, please note that for further benchmarks rules wil be updated on screenshot and cpuz will be mandatory. The only results removed did not apply with the rule that a picture of the used rig needs to be shown - this is a normal competition rule and I think anyone should know this by now, we write this for each comp explicitly

Intermediate check done today, please provide always pictures of rig and memory, subtests at 3ds and check the validation rules again, it was really surprising how many results I had to block or remove...

Replied

Trollolol

Up - I have a an offer for 2x4GB of the plats, so split might be possible

Yours, 1 and 3 sold to Bullshooter, already paid. 5 is gone as well

PSC can be painful - painful semiconductor

Hi, welcome to the first part of my 1151 sellout, three out of four listed cpus can go immediately but I will make a thread with boards as well and need cpus until I have time to finalize this. All cpus have been tested on average air cooling and below par cpu clocking board Hero VIII, I do not have an ocf or gene/extreme and water cooling chiller like the usual offers here, so I tested boot and Hwbotprime at 5ghz for the i7s and Cinebench/XTU for the i5 at 4,8ghz. CPU 1. Intel Core i7 6700K Batch L547C185, delidded with LM, very strong chip that did 1,35v 5gzhz win7x64 for me and 1,37v hwbotprime including result saving^^. If you plan to use it on cold, you have to redelid it for LN2 use and change paste 2. Intel Core i7 6700K Batch L604F281, non-delidded, good chip that does win7x64 1,40v and 1,42v hwbotprime including result save and screen. 3. Intel Core i5 6600K Batch L536B345, non delidded, tested for Cinebench 15 4,8ghz 1,29v and XTU 1,33v, this was already above limit for my cooling nearly, the chip runs very hot. 5ghz win7x64 on Impact with boxed cooler 1,40v 4. Intel Pentium G4400 L526C255, non delidded, 4,75ghz wprime 1024 around 1,4v, not more tested. 5. 2x8GB G.Skill TridentZ DDR4-3600 C17-18-18-38 1,35v SN 1610A500xx79/80, way above average kit that easily did 2000 12-12-12-28 1t 220 tight for me around 1,95v, might work even a bit lower. In original packaging 6. 2x8GB G.Skill TridentZ DDR4-3600 C17-18-18-38 1,35v SN 1610A500xx61/62, very similar to kit above but needs bit more volts, so I only tested Spi32m 3866 12-12-12-28 1T 220 tight 1,85v and 4K only XTU and geekbench at 1,95v. In original packaging Prices in Euros, shipping not included 1. 500 Euros sold 2. 370 Euros sold, 3. 260 Euros sold 4. 65 Euros 5. 180 Euros sold 6. 160 Euros All items are located at Berlin, germany. Shipping in EU with DHL will be around 20 Euros for the K-cpus, with deutsche Post mems and 4400 can be shipped cheaper, depending on insurance, please ask for a quote if you are unsure what to chose. Payment is possible with paypal or wu, buyer covers fees, this is not negotiable. Disclaimer: No returns accepcted, I also rule out warranty provided by me because this is a private sale. On oc, ymmv, but I used neither good cooling nor infamous top oc boards for the cpus, and the mems were tested up to 3866 on Hero and only above on Impact.

Good morning - I forgot to mention this, might be helpful - we cannot rule out despite all options like sysinfo and plausibility check by mods that we will have to check some subs at end of competition which we might see as too good to be true. This will be done by FM if we send them there, we all know that no benchmark is free of bugs. So if you see something weird at benching and still upload the result, make sure you have submitted several results to be save, bc when the file shows irregularities, there will be no way this stays at the competition and I do not want to hear complains you weren´t warned before. When it comes to a qualifier for a competition that involves this much of reward, we don´t play it eazy going^^

Looks good, 200K incoming

Quite impressive - grats

Well, that´s history now, if something in the thread like the gtx1 are interesting, even at 2x2gb, I think I could give you a good price with bad conscience of emi - seriously, might have been my fault, he has tons of workload atm and I might have made thread too early^^

That´s ok and a good reason, for me the problem is more people asked me and I could not explain - thanks

Can you please xplain why I can submit with the hwbotsubmitter but same file I think cannot be uploaded at hwbot form?

No info on this, when I was sure these all are good and fully working mems after the tests I made the thread and gave it a go

He has no paypal and very limited options and experience at international deals, otherwise this would have been no problem. Would have been much easier for me if he could have handled this himself as you can imagine, but this was the best solution

Payment received, thank you, will go to post office now and later today will send tracking to you and other buyers

Sorry Stefan , the PM of Tasos was bc of no6 and he bought them and already paid, he was faster

7 Euros, tracking included

Hi, For sale are a couple of rare and excellent memory kits, all are tested to work and got seal of approval. These items are the heart of the awesome collection of a good friend who asked me to test these, rate them and then sell because he decided to end his collectors mission. Here we go.. Hyper 1. 2x2GB Corsair GTX2 (Elpida Hyper) Legends, I tested them on function on two systems and they worked without problems, a very fast oc test resulted in 2133 7-7-6-20 1,68v 32m, not more tested. PSC 2. 3x2GB Corsair GTX1 (PSC) Rated 2400 9-11-9 1,65v, all sticks did 2400 8-11-8 at 1,65v and below at my tests. For optics refer to the picture, some fins are a bit bent, but nothing that really hurts. Two sticks 7.1, third 8.1, all are psc though 3. 3x2GB Corsair Dominator GT DDR3-2000 c8-9-8 1,65v PSC, at my tests the sticks needed around 1,72-1,75 for 2400 7-11-7-28 1T, not more tested. Useful, but not highend, at fins, a screw is missing at two of the three sticks, apart from this mint condition in original packaging 4. 3x2GB OCZ Platinum XTE DDR3-1600 c6-8-6 1,65v PSC obviously, I tested them very quick on specs, no real oc results, these might scale like a lot of OCZ with volts and do OK then, but at low voltage tests they already needed above 1,65v for 2200 7-10-7 at my rigs Samsung D 5. 4x4GB Corsair Dominator Platinum DDR3-2666 c10-12-12-31 1,65v Excellent technical and optical condition, I checked them in random pairs, both did 2800 10-12-12-25 1t at 1,65v, not less tested, 2800 c9-12-12-21 1t twcl6 worked below 1,95v, they sure will do this on lower volts on the right system and tuning. With original packaging 6. 2x4GB G.Skill TridentX DDR3-2400c9-11-11-31 1,65v Old HYK0 kit, 12462500, very strong Samsung, 2800 9-12-12-21 1T twcl6 1,96v 32m easy. In box with fan Hynix 7. 2x4GB AData XPG DDR3-2933 C12-14-14-36 1,65v Hynix MFR, awesome looks and some of the highest bins you could get. Tested on specs and also for 3000 11-14-13-28 below 1,75v 32m, on asus tight profile which needs lots of volts compared to auto or asrock. Top MFR 8. 2x2GB Trancsend Axeram DDR3-2400 C10-12-11-28 1,65v Hynix CFR, good kit, tested for 2800 11-13-13-28 1t 1,68v 32m. Good optical and technical condition Prices (in Euro, shipping not included) 1. 150 Euros sold 2. 150 Euros 3. 40 Euros sold 4. 35 Euros sold 5. 300 Euros 6. 75 Euros sold 7. 85 Euros sold 8. 25 Euros The items are located at my flat in germany, I handle shipping and payment. Western union preferred, if paypal is used the buyer covers all fees, this is not negotiable. Shipping prices will vary with value and weight, cheap items without insurance I can send for 7 Euros, the Doms for example will be around 15. Please aks for ashipping quote especially when you want DHL or are outside of EU. Each deal has to be confirmed by me, so even if you are fast someone might have been faster - I also might confirm a bit delayed bc I am very busy atm Dsclaimer: Private sale, no returns and no warranty. The items are tested and work, all have been checked with memtest and in windows. If you don´t accept this, please don´t buy

Afaik he is moving across the continent, let´s hope he can ship soon. Obviously bad timing for a sales thread, this has to be solved

This is the right audience, George - I proposed this as a discussion base a while ago, but this directly influences enthusiast benching in the future if we implement this, I see no reason to do this in the dark. We need feedback to see if the idea make sense to the benchers which will be touched by this change if it is done and what you all think about it

Nice