websmile

Final Bump

http://forum.hwbot.org/showthread.php?t=138687

Bump

Screen faster next time

Mushkin added, solid 1366 mems

1,8 and 1,83v, my Hero is not overvolting as hard as other boards, it is quite precise Edit 1+2 sold

Good evening up for sale are three memory kits, all work flawless and are in mint condition 1. 2x4GB Kingston HyperX Fury 2666C15 (Hynix AFR) Purchased for tests, 3200c11 and 3333c11 on Z170 Asus Hero easy, a bit uneven and therefore needs around 1,68v for 3200 11-18-28 32m, good voltage scaling and tolerance which means these are AFR. In original tray 2. 2x4GB Kingston Fury 2666C15 (Hynix AFR) Also purchased for tests, strong kit, 3200 11-16-28 32m around 1,65v, should work with less volts, like on #1 easy 3600C13 with 1,65v, not used on cold, heatspreader were not removed. Compared results to a couple of ES 3466 people I know tested and these are not too far away 3. 2x4GB Corsair Vengenance 2133C13 LPX Low profile mems, working fine in original packaging, best OC 3000 14-14-28 1,33v, 3333 possible as well with volts, ideal for HPC or small itx/µ-atx build 4. 3x2GB Mushkin Blackline DDR3-1600C7 Working, with original Mushkin box, no good clockers for haswell or ivy at least Prices 1. 65 Euros+shipping sold 2. 110 Euros+shipping sold 3. 40 Euros+shipping 4. 35 Euros+shipping Payment with paypal or western union, buyer covers fees! - the prices are calculated this way . The mems are located in germany, shipping is around 6-10 euros depending on items value Disclaimer: No returns, no warranty. On oc ymmv, but I tested on air and did use a standard board to have best chance of reproducable results

This OS does not support ram disk size above 124mb when I install, very funny - thanks for headsup on the performace edition, might give it a try, I think I started form wrong direction when I made transition to 1151, should have started with full xp and then strip one by one instead of using old built.

@Andreat85 No USB3 drivers for XP, buy a pci or pci-e usb 2.0 controller and use it with XP, this should work Hero is still doing good for me, no weakness. 4x4GB above 3800Mhz easy, time is slow, but reason for this is bad XP (no ram-disk, was already 0,8-1,2s slower than perica_baris bench os at 1150 and 1155 depending on freq) and slow bencher ^^ P.S. Funny, these are last mems I have atm

Received, I will ship today and send you pm with tracking like I promised to Please move to sold and thanks for the space, HWbot

Sold - these are Samsung-E, so if board and IMC can do it I see no reason why they shouldn´t scale, voltage scaling was linear for me @Asmola, sorry these were just sold to barbonenet

Lol, no, only change in priorities, other than in the past on especially DDR2 and DDR3 I neither bench nor need reference kits anymore, keeping DDR4 is only dead money in my drawer

Hardcore, good job

Price drop on the G.Skill and last bump, these do 3600 C16 below 1,35v for me easily at last tests

Yours are around same range, a bit more volts at slightly diferent settings, the kit at the screen was sold earlier, I do not keep any bench sticks at all, I sell all directly after tests

Fast enough - I tested some 4gb and 8gb Samsung E-die lately, Patriots really doing good best gskill on volts I had, but 1T does not work on my boards with these above 2K 2x8GB 3200c16 kit, only 8GB Samsung E I could get atm, should do it as good as any other kit, on OCF I have first time real advantage over Hero with these, 3600 did not work for me on other board

Both Patriot kits sold, the 16gb GSkill kit is is still available

PM sent, but #3 is already pending, I sent details for #2, I hope this was OK, #1 available now

PM sent, prices include shipping world-wide

Hola, up for sale are three Samsung E-die kit, two 8gb and one 16GB kit, all tested to work flawless, for details please refer to the item descriptions 1. 2x8GB G.Skill RipjawsV DDR4-3200C16-16-16-36 1,35v A500 SN, Samsung, I planned to use these for my daily rig but had to change plans due to personal reasons. The kit should be one of the best 16GB-sets you can get, I tested it on OCF for 3600 11-17-17-28 tight 1,83v BIOS for all benches, for daily use 3200 15-15-15-28 works way below 1,35v the kit is rated for. The G4400 I used for test usually needs a bit more for for tight timings than my 6700K ES, so you might be able to get even better results. In blister with sticker 2. 2x4GB Patriot Viper4 DDR4-3400 C16-18-18-36 1,35v Samsung E-based, slightly above average for the bin, 3600C11 worked around 1,9v for all benches, 1,85v failed, 3866 12-19-19-28 works but needs 1,9v on ocf, if you want 4K c12, don´t be afraid to pump voltages . In blister with sticker 3. 2x4GB Patriot Viper$ DDR4-3400 C16-18-18-36 1,35v Finally my last Samsung-E retail kit, clearly above average and tested for 4000 12-20-20-28 1,91v Bios 32m and CB for example, 3866 C12-19-19-28 around 1,8-1,82v depending on bench and settings, I experimented a lot on my last tests. In blister with sticker Prices: 1. 185 Euros shipped Sold, payment received 2. 100 Euros shipped sold and paid 3. 135 Euros shipped sold and paid The Ram-kits are in germany, I can ship world-wide with deutsche Post, tracking and insurance are part of the service. Payment with paypal or western union, buyer covers fees! Last point, I received a couple of requests lately, and I am sorry I cannot provide as many kits as might be needed, but these are my last Samsung based kits I own and tested Disclaimer private sale, I do not accept returns and don´t offer warranty. The items offered here are tested to work though, and warranty labels are intact, heatspreaders were not removed

Sorry for the late answer, I will make a new thread soon to sell the remaining memory kits

I sense fail

1,9v tight settings - sold

Reply sent, I will put the kit on hold preliminary

Nice pretest