websmile

Hi, up for sale is a very good Samsung E kit, Patriot 3200 Viper4, I have three kits left which are all very good and will sell them all, first this one 1. 2x4GB Patriot Viper4 DDR4-3200 C16 Samsung based, I am first owner, kit is tested for 3600c11, C12 and 13 on two boards, I also was able to run these easily 4000 c12 and 4133 C13 on OCF, there is enough headroom for 4000c11 or 4133c12 if you are not afraid of volts. Screens of test I provide here, please take in that OCF overvolts, 3600c11 for example was 1,84-1,85v real, 3600C13 1,53-1,54v and 3600c12 around 1,66v real which was also confirmed on M8H. Tests were done on three different cpus, 6700k, 6600k and even 4400 Pentium and sticks are rock solid. I tested tons of Samsung kits last months and these are some of the best. In original box with sticker Price: 110 Euros shipped worldwide sold Payment with western union or paypal, buyer covers fees Disclaimer: no resturns and no warranty, on oc ymmv but I think I explained overvolts and tested them good enough to see results are reproducable

Sure - rejects, my best sticks are sold already

You are obviously quite busy killing hardware - I made final test yesterday on the board I bought to confirm my earlier test results, still working - time to empty my closets completely^^

Leaves me a bit clueless, differences on vendors are big at settings needed, I noticed this on Asus and Asrock I tested - try tRDWR_sg and dd set by hand to 11-11 or 12-12, this might be worth trying, apart from this good luck, I haven´t tested GA and do not intend to do

Have you tried different twcl values, Albrecht? Try twcl8-11 one after the other, sometimes you need special wcl value to make a Cas Value boot and work

I am no big fan of Gskill anymore, but I tested a lot of kits and on OCF and Hero it was easy for me to get 4000 stable, clocks from 18-20 down to 12-20 and 13-19, depending on the kit, on some I had to use 2t, at 4133 I always had to use 2T CR, no matter which kit, it might also be problem of my IMC because I saw this also on other brands of mems I tested. D-Die and 4000 was easy as well, but required lots of volts already at 16-20. Maybe you try 2T to see improvement, as said I think it is more IMC matter for me than mems

Strong run

The end is ear - in fact it has come Please close and move, I´ll be back - thanks for the space, hwbot

new... different batch^^

Interesting, thanks for the information

Don´t take this as an affront, but why does cpuz readout and max xtu frequency differ that much? Is there something wrong with readout at win10? Usually if you have 4128 shouldn´t it be 4,13ghz?

Last bump

strong

Price drop on the memory kits

Nice

Shipping to USA is no problem. will be around 12 Euros including tracking and insurance, tests were on Asrock Z170 OCF BIOS 1,43V with 6700K, IO and SA 1,1 and 1,15v,, when I found XTU, Spi32M and cinebenches stable I also made a Memtest86 run to confirm used voltage is stable. I made all tests at 4,5ghz Core and Cache to generate bandwidth and pressure on the Ram, my normal routine when I test bench memory

Hi, up for sale are a couple of items I no longer need 1. 4x4GB Patriot Viper4 DDR4-3200C16-16-16-36 1,35v Almost new, only bought for tests and to confirm ICs, seems Patriot used quite strong Hynix on these two sets, both do 3200 c12-15-15-28 tight easily, tested for 1,59v and 1,65v BIOS on OCF, both boot the 3200c11 profile but one kit hangs at windows enter, second after post, I didn´t bother to tweak on this as I am no Hynix-man. Better than half of the Geil 3333 kits I had and all of my Kingstons, so I decided to offer them here for people who search good hynix for cold use. PCB is solid, mems are in mint condition, voltage scaling very good 2. 3x2GB Mushkin Blackline DDR3-1600 C7-8-7-20 1,65v Working, tested with several tools including memtest, I used them for 24/7 a while on 1155 before I switched to my old bench Samsungs I still had in the drawer. In a wooden case with original sheet of Mushkin 3. Sunbeam Rgeobus fan control Works, tested and approved, I do not need it anymore. A classic, able to control 4 fans and a collectors item already 4. ATI Radeon X1900XT Crossfire edition+CF Dongle The card works, but sometimes shows random Vram errors, not sure what causes this because the card is benchstable even with oc. Including the CF-Dongle which you can use for all X8xx to X1950XTX Crossfire setups. Because of the mentioned weakness offered cheaper than usual 5. Asus Radeon X2900XT 512MB defective Card gets hot, when it moves to 3d mode it freezes. Non ovened, with TR-03 cooler if I see this correctly. 6. Sapphire AMD HD5850 1024MB defective? The card often boots only at pcix8 and shows problems when I install discrete driver, no idea what causes this. Bought it for GPUPI tests just to see I do not need it and then did not bother long with it. Prices in Euro 1. 140 Euros+ shipping 2. 25 Euros+ shipping 3. 10 Euros+ shipping 4. 15 Euros+ shipping 5. 10 Euros+ shipping 6. 10 Euros+ shipping All items are located at germany, shipping depends on transporter, size and value, on the cheaper items like vgas and the fan control, imho only combined shipping with other items make sense, for the Patriot I can offer 12 Euros deutsche post tracking and insurance for example or 15 Euros with dhl in europe. Payment with paypal or western union, buyer covers fees, this is way I calculate. Disclaimer: Private sale, no returns and no warranty provided by me. On oc, ymmv, but I use normal air cooling for all of my results, these should be reproducable therefore

The question is if this still makes sense for 3d06 and older benches, and it is skylake which is not hit by rtc bug. After recent decision of FM to ban LOD and other results from HOF, I am not too sure you can validate some results at all. Edit rules don´t ask for validation link anymore if I read them right - so it is about general rules that have to be cleared, needed or not^^ http://hwbot.org/news/877_application_5_rules/

Nice

Helpful, I like this, also the advice to move to 1m40s

Not bad, get more beer

A promise is a promise, when you give you keep it, no need to thank for this These were my last GSkill DDR4 retail mems I binned, thanks for the space hbot, thread can be closed and moved

Small proposal, when we rules out ES hardware, spd for screens is needed, and with new gen hardware, it would be nice if clarification is made on some mainboards. Impact was retail at start and in stock at lots of countries for example, but soon new boards might be released or people have doubts, so this might be helpful

Excelent work, lots of time invested, very methodical - this will help a lot of people and you can´t get enough credit for this