websmile

Cough

It clearly says So what is your problem, guys?

Keep the Samsungs, if you use normal GA Socf and 4770K, it is most likely the system that limits you, the fact they do 2800c9 on different rig shows mems are of good quality. Put the 4770K in your friends rig and test if the IMC can do 2800C9, afterwards you will know if board or IMC limits you - make a decision on what to do after this test^^

Ebay will make you suffer, other than people think and results you see at hwbot and forums, tons of psc are unable to do 2600C8 tight stable at any voltage, and lots of Samsungs fail 2800 C9 as well - if you plan to use cold psc are by far best option for most benches, air use Samsung is good choice like Pieter said. Skip Hynix completely, benchperformance is bad. There is no "same performace at same timings" - good psc can take tighter subtimings than samsungs for example, and best possible maintimings are different as well at same frequency

Please make sure that your screenshots also show cpuz mainboard tab to prove that you used the mandatory Asus mainboard, seems that some people forgot about this. I cannot guarantee these results will be accepted for the competition without this

Screen of both Ripjaw kit - bump

Strike is over, I am sure things will work for you

To make it clear, I would not have removed the submission if the XTU frequency would have been shown at the benchmark window, I even looked at all results of Rule to find a frequency at monitoring to avoid to have to remove the scores. There are vendors whose boards set higher BCLK than others at certain settings, and fluctuation is often concealing this (example 100,1 on Asrock showed 5002-5004 at 50, Asus showed 5004, hwmonitor showed me higher freq of 5007 for asrock while asus was indeed 5004). I had Asrock OCF Z97 myself and know the problem, but if I have only CPUZ reading above 4503 cap, I have no choice but to remove the score.

This might give you major headaches, a lot of board/imc combinations weren´t able to run 32m hypers, they produced instant freezes or shutdown at tight settings. Good luck

Prices lowered

Can be moved to sold, thanks for the space hwbot

Good cpu and good job

Good evening

6600GT single yes

Cheap

Bump

On AMD - on AMD it is easy to run gmh at 400c3-3-3 at 2,1v and below as well, Intel is different on low latency. When I tested the legendary cellshock from stunned_guy, which did above 500c3 on amd 32M, I needed 2,2v for 400Mhz 3-3-3-8 on Intel P965 and on P45 even more volts, he was able to run these 434Mhz at less volts 3-3-3-5 on AMD.... Please do not underestimate the influence of chipset and mch vs IMC, old Intel vs old AMD when you judge results

http://abload.de/image.php?img=ballistixgbhz2rffe.jpg The mems you linked, they are rated for 2,2v like all Crucial Ballistix with Micron D9G Fatbodies need looots of volts, I am not sure they help you at 2,1v limit, you need very good binned GMH I think and luck. Without voltage limit the topic would be much easier to solve - mod it

Voltage of 2,1v might spoil your fun, no idea how good MCH is on asrock board. But 667 crucials were also at c3 2x1gb available.

Fixed

I agree on Geniebens proposal, good Micron D9G and also some Elpidas used for example on OCZ 800C3 kits could do this. Team 800C3, 1200 and 1300c6 are very well binned as well as Crucial Ballistix 1GB dualsided sticks, if you are not shy on voltage there are more Micron based kits that can do this.

It is reasonable, if you can test oc you might even ask a bit more - 2400c9 TridentX are often able to run 2800C9-12-12-18 around 1,98-2,1v depending on quality on 1150 at tight subtimings, kits that can do this are searched for and very useful for benchers. 80 US-Dollars shipped out of the box without oc results is price that seems to be OK for me

Hi, up for sale are a couple of CPUs and PSC, all items are working 1. Intel Core I5 4670K boxed batch L315B388 Perfect condition, box and cooler can be part of the deal. VID 0,976v on ImpactVII, the cpu runs extremely hot because of my boxed-like cooler, anyway I managed to run 5ghz 32m 1,35v 4/4. Due to the scaling batch and low VID this cpu seems to be a good option on cold, for normal use you better delid it or use strong watercooling . Good IMC, 2800c9 tight with Samsung and 2667C8 tight psc work easily 2. Intel Core i7 4770K batch L315B407 CPU was delidded and treated with liquid metal, it is now reworked and uses Gelid Extreme as TP. VID on Asrock and Impact 0,976v, on air CPU did 5ghz 4/8 32m 1,21v on Asrock Z97, 5ghz core 5ghz cache at 2800C9 tight 1,20vcore. Tested after apllication of Gelid for function and works flawless 3. 9x2GB X-PSC (GSkill Flare, Ripjaws, ExceleramVX, Dolphin) The bundle contains the following kit: 2x2GB GSkill Flare DDR3-2000 9-9-9-24, 2x2GB GSkill Ripjaws DDR3-1600 7-8-7-24 (2x); 2x2GB Exceleram VX DDR3-2000 C7-10-9-24. On top comes a Dolphin DDR3-2133 C9-10-9-31 stick with 2286 xmp . The first eight sticks do 2400 C7 on Z77 between 1,57-1,72v at single tests(2x1,57v, 1x1,63v, 2x1,65v, 1x1,69v, 1x1,71v and 1x1,72v), on Z97 I tested the flare and the Exceleram for 2600 C8 around 1,88-1,9v and the ripjaw kits at 1,8v 2667 8-13-10-28 twcl6 4-5-4 tertiaries and the secons ripjaw kit for 2600 8-12-8-28 twcl6 4-5-4 1,8v and 2667 8-13-8-28 1,85v 32m. The Dolphin stick is only tested to work. All of the sticks are useful air clockers, but especially the ripjaws could be real interesting on cold because they can take tight subs and beat nearly all 2400C8 and C9 kits for example I know of on voltage at 2667 on air. Prices 1. 245 Euros+shipping now 240 Euros shipped sold 2. sold 3. 180 Euros shipped Preferred payment options are paypal and western union, buyer is responsible for fees. If I shall ship outside of EU, please ask me for shipping quote, on some locations I am not so fond anymore to ship to after I learned that certain forums prohibit sales outside of their country while benchers from these forums loot stocks worldwide, there are enough black hardware holes already ^^ Disclaimer: no returns, no warranty provided by me because I sell as a private person who had hardware and benching as a hobby. On oc ymmv, but I test on air and with non cherry picked components most of the time

Roman, these are 2400c9-11-11, what you offered at Luxx, if we talk about same kits, were crappy 2400c10-12-12^^ - correct me if I am wrong