websmile

Most likely I will put them in a vitrine together with my pis, mach, flares, Dom Platinums etc - they will be safe from dust there

Hi, I will take the ripjawz

can be closed and moved to sold, thanks to the buyers, have fun with the mems , and thanks for the space, hwbot

Der kommt schon wieder, erstmal hast du zum Start Roman abgezogen - keep on pushing , nice score

#6 sold and shipped, last bump, also added fast test of the trident at extreme tertiaries(4x4, others at 1) twcl6 ~1,75v on 1155

The Corsair XMS 3200 c2 rev4.3 TCCD are pending for odbytorg

@varachio I saw the score, at the settings and the OS used it was faster than normal Ivy bridge with mems on LN2 and around 10 seconds faster than fastet Ivy-Bridge E Submission which used mem settings of 1470 c9- SB-E is slower per MHz than both Ivy and IVy-E and far slowe than haswell,sad to say this, but the score wasn´t possible technically, seeing the loops it was obvious that the run was made at much hogher cpu-frequency than 4ghz....

I still have a couple of Kingston value Kits with Micron and Hynix :banana: - feel free to make PM offer

Too bad on the GTX2 - the Supertalent Chrome and the Corsair XL Pro are sold to Leeghoofd, hope they do a good job for you, Albrecht the remaining DDR1 kit and only one ddr3 kit are still for sale

Dann fohes Fest, Gregor #2 sold to Michel90, #1 sold to strunkenbold - hope the Sams will serve you as well as they did for me

Hi, I decided to move into new year with consolidated mem stock and offer a couple of very decent kits here for sale. All are tested to be in fully working condition. On DDR3, not all kits will go, if enough is sold, remaining parts will stay DDR3 1. 2x4GB G.Skill TridentX 2600c10-12-12-31 1,65v (Samsung D HCH9) Last Kit of my TridentX binning marathon this year, 1500 in partnumber indicates HCH9. 2800 10-12-12 on Ivy and Haswell, both results around 1,66v, 2800c9-12-12-18 tested on M5E needed around 1,95v for hard subs and twcl6. In box with unused fan 2. 2x4GB TeamGroup XTreem 2400 C9-11-11-28 1,65v (Samsung HCH9) Best kit out of around a dozen I had of these, used ICs are Samsung D, most likely HCH9. Tested for 2800 10-12-12-28 on M5Gene at 1,65v and 2800 9-12-12-16/9-12-12-21 at 1,92/1,90v on M5Extreme TWCL6 and very hard secondaries and tertiaries. Fast test on Haswell showed similar results. In original Team packaging 3. 3x2GB G.Skill Trident 2000 9-9-9-24 1,6v (PSC) Triple kit with follow up SNs and 1040, which indicates PSC-ICs. Tested for specs and 2400 8-11-8-28 twcl6 extreme tertiaries, but need more voltage than my other psc kits, because of this they can leave or will be used for 24/7 if they stay. In original G.Skill blister, warranty labels intact. 4. 2x2GB Kingston HyperX 1800 C8-8-8-24 1,7-1,9v (Elpida) Bought because of curiousity, run the specs way below 1,65v and tested for 2200 7-9-7-21 32M, but need a lot of voltage. I did not bother to test more because I still have ripjawx2133c8 and an excellent ocz bbse kit which easily do 1300, maybe someone needs the Kingston though and I offer these here. Intact warranty labels, ICs should be bbse, but are definitely Elpidas. 5. 2x2GB SuperTalent Chrome 2000 C8-8-8-24 (Hyper) Last of tons of Hypers I binned a few years ago, better than the 2000c7 Projectx and 2200C8 Speed I had for example. Tested on all newer Intel platforms on which they always did 2000c7 way below 1,65v, last fast Test on Haswell showed 2000 7-7-6-20 1,63v. Also tested on Ivy for example for nearly 2150 7-7-7 and 2350 8-8-8 32M with 1,73v. In original blister packages. DDR1 6. 2x512MB Corsair XMS 3200C2 rev4.3 (Samsung TCCD?) Kit was purchased a while ago, I used it for some retro benches, it is not easy to handle, so would be better buyer knows what he is doing^^ - apart from benches, I pre-tested the kit for 300 2,5-4-4-8 1T at 2,62v on DFI Ultra D, did run easily 320+ for cinebench and other tests, but I never had combination that was ideal for mem testing in recent times. Bulk with intact labels 7. 2x512MB Corsair XL Pro 3200 C2-2-2-5 rev1.2 (Samsung TCCD) Excellent condition, sticks are tested single with memtest for 310 2,5-3-3-7 2,7v and 310 2,5-4-4-7 at same voltage, iirc they did 280 2.5-3-3-6 at ultra-d at 2,6v, 300 and above is no problem with right board and IMC. Bling bling works fine . In corsair blister Prices excl. shipping cost 1. 155 Euros sold to Strunkenbold 2. 175 Euros sold to Michel90 3. 45 Euros 4. 35 Euros 5. 95 Euros sold to leeghoofd 6. 22 Euros sold to odbytorg 7. 25 Euros sold to leeghoofd Items are located at Berlin, germany, shipping should be from 7-17 euros in europe, depending on use of Deutsche Post or DHL, but please ask if you need bigger package or are from outside EU Best regards Disclaimer: No returns, no warranty provided and items are sold as seen. I cannot rule out compability problems because hardware tends to behave different in each system, but all is tested and fully working

200c6 pi 1222 batch Good score, damn the 4000,01 limit which prevented uploading even better one...

Hau rein und trink nicht aus Versehen das LN2 - Have fun^^

On stage 8, 4000,01 without any tolerance? Just want to make this clear before stage is ended. Or is 4000,1 still valid? Score with 4000,09 could be loaded, this why I ask

Great mems, Roman - hope you have my adress

Top

Old low voltage test I found, all on air, not sure this matches the rules http://www.hwbot.org/submission/2464801_websmile_superpi___32m_core_i7_2600k_6min_33sec_937ms?recalculate=true 633,937 -websmile - Core i5 2600K @ 5003.10 MHz - 1135,7Mhz @7-9-7-22 - Asus Maximus IV Gene-Z68

Lol, Stuwi, someone stole the Heatspreaders of your Hypers - good score

Go for it, make them Fly

Top, Frank, das kann sich sehen lassen

good work

Not bad, Stefan

Have fun, Marc

Good job

I recommend setting trp to 9 when mems fight to do 8 stable on 1300 - iirc, the machxtreme Holger has were fighting with trp8 at 1300, so stability at 9 should be possible and 1300 could work, this would be boost over 1200 for sure