Andrix85 Posted June 16, 2014 Share Posted June 16, 2014 Hy boys, i have some issues with this mboard. I'm benching on LN2 but i have debug code 03 and i'm not able to set up the bios. I have tried two 4770K but same problem. What can be ? I'm using X08 bios, i have tried alsso F7 official, but anything new. Thanks Quote Link to comment Share on other sites More sharing options...
TerraRaptor Posted June 16, 2014 Share Posted June 16, 2014 (edited) I had same issue with m5g - wet cpu was the reason. Also rtls may be wrong. Edited June 19, 2014 by TerraRaptor Quote Link to comment Share on other sites More sharing options...
Andrix85 Posted June 16, 2014 Author Share Posted June 16, 2014 I had same issue with m5g - wet cpu was the reason. Also trls may be wrong. really ? i have this problem also before benching, with cpu not wet. Quote Link to comment Share on other sites More sharing options...
der8auer Posted June 16, 2014 Share Posted June 16, 2014 Are all pins in the socket fine? Quote Link to comment Share on other sites More sharing options...
Andrix85 Posted June 16, 2014 Author Share Posted June 16, 2014 Are all pins in the socket fine? Yes Roman, all pins in the socket are ok. I have cleaned the back ok cpu. Tomorrow I try again. I hope to solve. Quote Link to comment Share on other sites More sharing options...
sin0822 Posted June 19, 2014 Share Posted June 19, 2014 you try the backup BIOS? and disable dual BIOS mode? Quote Link to comment Share on other sites More sharing options...
Guest Bullant Posted June 19, 2014 Share Posted June 19, 2014 Also when try again only use 1 dim in first or second slot Quote Link to comment Share on other sites More sharing options...
Andrix85 Posted June 20, 2014 Author Share Posted June 20, 2014 I tried with backup bios...Same problem...On air mboard go normally...Only on LN2 03 error code lightning...Also with one dimm... Quote Link to comment Share on other sites More sharing options...
Moose83 Posted June 20, 2014 Share Posted June 20, 2014 Have you checked with other Board? Quote Link to comment Share on other sites More sharing options...
TerraRaptor Posted June 21, 2014 Share Posted June 21, 2014 what are the temps when this 03 code happens? Quote Link to comment Share on other sites More sharing options...
Andrix85 Posted June 22, 2014 Author Share Posted June 22, 2014 I can try with new Gene VII soon...?...The temps when 03 code happens is around -20 / -30...If i boot around 0 and i set mem on bios can be normal... Quote Link to comment Share on other sites More sharing options...
Calathea Posted June 22, 2014 Share Posted June 22, 2014 My bet is on the mobo It's very good ofc, but I've had mobos that didn't like sub zero what so ever before. Quote Link to comment Share on other sites More sharing options...
jjjc Posted June 22, 2014 Share Posted June 22, 2014 What method of insulation are you using? I had an Asus board doing a similar thing on subzero a few years ago and it was because there was too much vas on the board and some had got into the socket. Might be worth looking into. Quote Link to comment Share on other sites More sharing options...
Andrix85 Posted June 24, 2014 Author Share Posted June 24, 2014 I use rubber on socket and armaflex, not vaseline. Mboard run well from July 2013 on subzero. Only from few days error 03 on just -15°...Tomorrow i check cpu on GENE VII... Quote Link to comment Share on other sites More sharing options...
Crew Vivi Posted June 25, 2014 Crew Share Posted June 25, 2014 Andreat85, Do this mod to fix 03 problem. short small resistor behind cap. enjoy Quote Link to comment Share on other sites More sharing options...
nXXo Posted June 25, 2014 Share Posted June 25, 2014 Andreat85, Do this mod to fix 03 problem. short small resistor behind cap. enjoy what size resistor ?? Quote Link to comment Share on other sites More sharing options...
Moose83 Posted June 25, 2014 Share Posted June 25, 2014 Only short it no resistor Quote Link to comment Share on other sites More sharing options...
Andrix85 Posted June 28, 2014 Author Share Posted June 28, 2014 I have try also the MAXIMUS GENE VII mboard and same issue...03 code on cold... There is a mod also for GENE VII ? I sold GIGABYTE Z87X-OC perhaps... Quote Link to comment Share on other sites More sharing options...
suzuki Posted June 28, 2014 Share Posted June 28, 2014 Maybe it is your cpu,degraded... Quote Link to comment Share on other sites More sharing options...
Andrix85 Posted June 28, 2014 Author Share Posted June 28, 2014 Andreat85, Do this mod to fix 03 problem. short small resistor behind cap. enjoy there is the same mod on Z97X-OC ? Quote Link to comment Share on other sites More sharing options...
steponz Posted July 15, 2014 Share Posted July 15, 2014 03 is imc.. Memory controller is likely degraded. Mod is for the dreaded 15 issue. Quote Link to comment Share on other sites More sharing options...
steponz Posted July 15, 2014 Share Posted July 15, 2014 My es cpu had the same problem.. now I always get 03 issue... Quote Link to comment Share on other sites More sharing options...
steponz Posted July 15, 2014 Share Posted July 15, 2014 Also z97 will not have this issue. The 15 issue. Mod is only for z87. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.