zzolio Posted November 5, 2014 Posted November 5, 2014 (edited) MSI GTX 980 Gaming 4GB (non reference PCB) all mods are test on air and ln2 and are working Vgpu mod OCP mod Vmem mod Vpll mod Cold slow mod power limiting mod With this Vgpu mod you can use bios from all manufacturers Keep an eye on Vmem voltage if you change the bios. With some bios the memory only get 1.4V. The card can run with it but can't overclock much. If you use a bios that provides 1.4V then the memory gets 1.6V when you are in the bios so be careful when modifying the Vmem voltage if not using MSI bios To new overclocks remember to change the resistance on the Variable resistor until there is maximum resistance between the two pins you are using Edited November 7, 2014 by zzolio Quote
Crew Vivi Posted November 5, 2014 Crew Posted November 5, 2014 I can confirm the mod that makes all bioses work! Zollio for president! Great guides Quote
Guest Sinebrychof Posted November 5, 2014 Posted November 5, 2014 I wish you could make a similar guide for zotac 980 extreme . Quote
Crew Vivi Posted November 6, 2014 Crew Posted November 6, 2014 I wish you could make a similar guide for zotac 980 extreme . he can easy haha, just give him the right pics! Quote
raules009 Posted November 6, 2014 Posted November 6, 2014 Power limit mod also works with conductive paint personally tried without moving the power limit to afterburner. What else can run with conductive paint? for the ocp mod I have to remove the resistor or can I use the conductive paint? Quote
Guest Sinebrychof Posted November 6, 2014 Posted November 6, 2014 You need to remove the resistor. Quote
Calathea Posted November 6, 2014 Posted November 6, 2014 (edited) Really nice guide, I will try to apply it on my gigabyte 970. Edited November 6, 2014 by Calathea Quote
zzolio Posted November 7, 2014 Author Posted November 7, 2014 Time to test.... I hope that some of the moa participants will test their cards now that I've made some easier mods Quote
Mikecdm Posted November 7, 2014 Posted November 7, 2014 I modded mine last night. As long as i didn't short something out trying to do vmem, it should be good to test soon. Quote
zzolio Posted November 7, 2014 Author Posted November 7, 2014 mods test on ln2 and are working fine Quote
zzolio Posted November 8, 2014 Author Posted November 8, 2014 yes you just need to screw some more on the VR Quote
steponz Posted November 8, 2014 Posted November 8, 2014 Just wanted to be sure.. not sure what resistance value is ok.. I think I might mod my gem card tonight.. doing a strix at the moment. Quote
SniperOZ Posted November 10, 2014 Posted November 10, 2014 Some outstanding work zzolio... nicely done! Quote
dinos22 Posted November 10, 2014 Posted November 10, 2014 outstanding indeed, nice one zzolio!!! Quote
Guest cowgut Posted December 20, 2014 Posted December 20, 2014 I know you guys have tested this mod but I seem to run into an issue with mine First off I did the power mods and had no issues Then I wanted more voltage so I did remove the resister in the gpu mod and connected a 10k.now in 2d its fine but 3d gives only grey screen,did the ocp mod(but ohms were fine and card in 3d should have been 1.276v)still just grey screen in 3d. I managed to get the resister off the board clean and in one piece but I broke one trying to get a value from it the other I dropped and could not find So anyone have a value for the resisters I removed ? Quote
Guest cowgut Posted March 17, 2016 Posted March 17, 2016 ahhh 2 year bump on this? great 2d card I have now but its a 87%asic card can someone tell me the values from the resisters that are called to be removed in this mod. I just want to get them back on Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.