Quake Posted January 14, 2011 Posted January 14, 2011 (edited) Exactly, you can run 2200 no problem, but now it depends on latency... Edit: Guys, how much VTT are you using? Edited January 17, 2011 by Quake Quote
Crew pro Posted January 18, 2011 Crew Posted January 18, 2011 can frequency be 4500.x or does it need to be below 4500.x? Quote
Crew pro Posted January 18, 2011 Crew Posted January 18, 2011 okay perfect, i was hoping we wernt going to see any 200 * 22.5 on amd! Quote
Massman Posted January 19, 2011 Posted January 19, 2011 200 x 22.5? What kind of dividers do you have on your board? Quote
chew* Posted January 22, 2011 Posted January 22, 2011 (edited) 200 x 22.5? What kind of dividers do you have on your board? Think pros referring to the floating bclk ASUS has which is why I supplied other forms of measuring speed with my submission That or that it doesn't take mush effort to hit the speeds on AMD. Comp for AMD I think would have been far more interesting with locked multi chips or a fixed multi that you set in the limitations. Edited January 22, 2011 by chew* Quote
Crew pro Posted January 22, 2011 Crew Posted January 22, 2011 well at 200 * 22.5 it is all too easy, standard bus speed, just set the ram ratio to 2000 mhz, set the nb and run your bench Quote
Massman Posted January 23, 2011 Posted January 23, 2011 Wow, your amd has a 1:5 mem divider? :-O Quote
Crew pro Posted January 24, 2011 Crew Posted January 24, 2011 (edited) lol sure yes it seems i just made up a new memory divider, asus/gigabyte can we please make this happen? i dont want to hear about platform limitations either... 250 bus is what i was meaning to say Edited January 24, 2011 by pro Quote
Calathea Posted February 7, 2011 Author Posted February 7, 2011 I did go sub zero on ram at last. Check out stage 4 Quote
TaPaKaH Posted February 7, 2011 Posted February 7, 2011 was subzero on RAM the only way to get 93x 6-6-6 ? Quote
chew* Posted February 8, 2011 Posted February 8, 2011 was subzero on RAM the only way to get 93x 6-6-6 ? Sam no need to go subzero on ram, here's your M4a79 board in action. http://chew.ln2cooling.com/qdig-files/converted-images/Ram%20clocks/lrg_corsair%20970%2032m%201.JPG http://chew.ln2cooling.com/qdig-files/converted-images/Ram%20clocks/lrg_corsair%20950%20ram%2032m.JPG Quote
Calathea Posted February 8, 2011 Author Posted February 8, 2011 was subzero on RAM the only way to get 93x 6-6-6 ? No as chew pointed out hypers will do this on air, but I doubt all will do it with less than 1.8+ vdimm -4 on the mem gives me somewhere around 20 MHz on same volt. I could run 937 6-6-6 @ 1.775 (bios set). Pretty low considering these sticks are nothing special, Dominator 1600 cl6. I'll check volt with dmm some day. Quote
TaPaKaH Posted February 8, 2011 Posted February 8, 2011 mine just stops at 940 stable, at 952 it passes memtest but fails on reboot and at 960 i get no post at all same story with multiple kits I tried Quote
chew* Posted February 8, 2011 Posted February 8, 2011 (edited) mine just stops at 940 stable, at 952 it passes memtest but fails on reboot and at 960 i get no post at allsame story with multiple kits I tried Sam, Use Turbo V. AMD's IMC freaks at 940+ with deneb especially for booting. You kinda have to finesse it from that point on. I also suggest using older chips, one's before amd started doing low K dielectic on deneb tend to fair better with higher vdimm. Edited February 8, 2011 by chew* Quote
Calathea Posted February 8, 2011 Author Posted February 8, 2011 I can not recommend turboV, it has a nasty habit of setting crazy voltage after a reboot (2.5 vdimm and such ) Quote
chew* Posted February 9, 2011 Posted February 9, 2011 I can not recommend turboV, it has a nasty habit of setting crazy voltage after a reboot (2.5 vdimm and such ) weird, must be a CH3 thing then, m4a79T has a diif version, works fine. Quote
Calathea Posted February 9, 2011 Author Posted February 9, 2011 Yes it's possible - but now I use tweakit instead Quote
Calathea Posted February 23, 2011 Author Posted February 23, 2011 Just got off the phone with my ln2 supplier, it's gonna be a fun weekend! Quote
dinos22 Posted February 28, 2011 Posted February 28, 2011 congrats pro, didnt even need to submit inthose two categories eek 1 Quote
Moonman Posted February 28, 2011 Posted February 28, 2011 Daamn, should have one 'Lynnie' in my reach but already too much rigs Very nice competition bot Quote
Calathea Posted February 28, 2011 Author Posted February 28, 2011 It was a nice comp Cred to chew* for beating us in stage 4 with a SS. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.