Christian Ney Posted August 14, 2015 Posted August 14, 2015 (edited) For the F7 users out there, you must download the latest version of CPU-Z (1.73) otherwise you wont be able to validate your .cvf files on the new validation website (valid.x86.fr). Download 1.73 .cvf files made with older CPU-Z version cannot be validated on the new website! Pro tip: XOC=1 (cpuz.ini) Changelog: -New validation -eXtreme Overclock Mode with light CPU load (when off, CPU-Z will load the CPU and make the validation file after 3s) -New tab : CPU Benchmark -Added L4 cache frequency (cache tab) -Added Windows 10 editions -Intel Skylake and Broadwell support -Fixed support for Windows 10 build 9926 CPU-Z Readme file: - XOC : eXtreme Overclock Mode : runs CPU-Z with as little system load as possible. Your system won't be fully validated before it is manually checked. Requires to restart CPU-Z. Edited August 14, 2015 by Christian Ney Quote
sin0822 Posted August 15, 2015 Posted August 15, 2015 (edited) Whatever, what a pain. Why bother loading the CPU with this xtreme OC thing? Isn't the point not to have a load? Also how to get this feature where it saves validation file every 3sec>? I tried with set to 0 and 1 and neither saves every 3 sec Edited August 15, 2015 by sin0822 Quote
xxbassplayerxx Posted August 17, 2015 Posted August 17, 2015 If I read it correctly, the XOC mode doesn't put load on the CPU since all power features will be turned off and there is not worry about CPU downclocking. However, for 24/7 (XOC mode not enabled), the CPU will be loaded for 3 seconds to ensure it is in the correct power state for the validation. Quote
Massman Posted August 17, 2015 Posted August 17, 2015 Press F7 -> small load -> create file after 3 seconds Quote
Christian Ney Posted August 17, 2015 Author Posted August 17, 2015 If you have some CPUZ 1.72 .cvf files you would like to have validated, email them to me with username and email to christian [at] hwbot.org before the end of the week. Quote
alancsalt Posted February 9, 2016 Posted February 9, 2016 (edited) When you use Extreme OC setting the CPU-Z validation says "unchecked" top right. Are these still acceptable for HWbot submissions? I've had one submitted to an OC thread on Overclock.net, asking if it is acceptable. I see "Your system won't be fully validated before it is manually checked. Requires to restart CPU-Z." Please explain "manually checked" - how and by whom? Edited February 9, 2016 by alancsalt Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.