Strat Posted September 5, 2015 Posted September 5, 2015 (edited) Hi folks, Sharing is caring right? Z170A Xpower is very strong on mem, at least on Hynix MFR/AFR (no other kit in my hand). Efficiency is right where it should be. First of all (as usual) : - Find the good temp for your mem. I can run -180° on mine but the best temp is -100°, this is where I can achieve 1830MHz 10-15-15-28-278 and 1870MHz 10-16-16-278 - Find the right amount of volt. Mine do not like more than 1.85v Then you can try the set of timings I found, it is not perfect, but seems to be a good base : With these settings and auto RTL/IO I get 44/45 5/5, sometimes 44/46 5/6. I did a quick try at 5Ghz, this is what I got : Full out run (i know my CPU is very bad ) : Feedback is welcome! :celebration: Edited September 5, 2015 by Strat 1 Quote
Rauf Posted September 5, 2015 Posted September 5, 2015 Nice of you to share! The msi board does seem nice. How about RTL and IOL? Quote
Strat Posted September 5, 2015 Author Posted September 5, 2015 I forgot to mention that part, I edited the first post. With these settings and auto RTL/IO I get 44/45 5/5, sometimes 44/46 5/6. Quote
pepinorang Posted September 8, 2015 Posted September 8, 2015 (edited) I'm sure he will like AFR, I already like mine! Those AFR should be cold already! Finishing support thread today and OC Guide soon :celebration: Edited September 8, 2015 by pepinorang Quote
krustybbr Posted September 9, 2015 Posted September 9, 2015 I'm sure he will like AFR, I already like mine! Quick aircooling try: Pt1t. Msi seems to have done a great job. Have you got tests using Samsung ics? Quote
pepinorang Posted September 10, 2015 Posted September 10, 2015 (edited) Msi seems to have done a great job. Have you got tests using Samsung ics? Yeah, Toppc validated DDR4-4600 Dual Channel on this board: http://hwbot.org/submission/2939951_toppc_memory_clock_ddr4_sdram_2302.9_mhz Tapakah also tested some G.Skill Ripjaws V (F4-3200C16D-8GVK) recently: +1733 c13 Memtest stable: +1800 c14 Memtest stable: +1866 c15 Memtest stable: Edited September 10, 2015 by pepinorang Quote
Rauf Posted September 10, 2015 Posted September 10, 2015 I like the MB, thinking about getting one. But I see you are using special bios (T0P) and it does not seem to be available anywhere. Anyone willing to share? Quote
Strat Posted September 10, 2015 Author Posted September 10, 2015 No probs, i will upload it tomorrow. But I think a better one should come out soon. Quote
Rauf Posted September 10, 2015 Posted September 10, 2015 Thanks! Command center light would be nice as well! Quote
pepinorang Posted September 11, 2015 Posted September 11, 2015 No probs, i will upload it tomorrow. But I think a better one should come out soon. Next week indeed Quote
pepinorang Posted September 11, 2015 Posted September 11, 2015 Thanks!Command center light would be nice as well! Will post a thread with everything needed before end of week, just need to finish some work before. Quote
Random Posted September 13, 2015 Posted September 13, 2015 Cas 10.... just... wow... I need to see some 32m action Quote
Strat Posted September 13, 2015 Author Posted September 13, 2015 32m is slow with Skylake... No motivation to try it yet. Maybe later. Quote
Rauf Posted September 15, 2015 Posted September 15, 2015 My board will arrive today Hope Pepi can share bios and tools soon By the way Strat, no issues overclocking quad kits for you? Quote
Strat Posted September 15, 2015 Author Posted September 15, 2015 No issue at all, but as you can see on Hwbot, 2 dimm on cold is way better than 4 dimm on air (even on cold because of the low overclocking margin). Quote
Rauf Posted September 15, 2015 Posted September 15, 2015 You are very fast to reply! I meant about the spd for quad kits giving problem overclocking on z170. Have seen reported that two mems from a quad kit overclocks worse on z170 than four the same mems on x99. Quote
Strat Posted September 15, 2015 Author Posted September 15, 2015 Tapatalk notification I haven't seen that kind of issue. Here is the Command Center Lite : https://www.dropbox.com/s/at5d08vamn95i61/CCL%202.0.0.8.rar?dl=0 But I can't find T.0P bios, you will have to wait for Pepi. Quote
pepinorang Posted September 16, 2015 Posted September 16, 2015 Here ya go, latest BETA BIOS (113) for Z170A XPOWER GAMING TE: https://www.dropbox.com/s/2t677xnt8jpny7j/E7968IMS.113?dl=0 Latest Command Center Lite: https://www.dropbox.com/s/42n4hngpraut565/2.0.0.10.rar?dl=0 Latest Command Center Lite Memory: https://www.dropbox.com/s/ynuzyynorhyogbe/CCL%20Memory%201.0.0.12.zip?dl=0 Quote
krustybbr Posted September 18, 2015 Posted September 18, 2015 this motherboard is doing well in overclocking memory? Quote
pepinorang Posted September 21, 2015 Posted September 21, 2015 (edited) this motherboard is doing well in overclocking memory? Thread and screenshots are there for you to make your own opinion... Here is some more: 4x4Gb 3866 Memtest with G.Skill memory (Samsung) Edited September 21, 2015 by pepinorang Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.