Jump to content

Featured Replies

Re-hosted these two BIOSes. Can anyone provide any feedback on the version and whether or not there's PLL override available?

 

- P67A-GD80 (A0O): http://91.121.148.119/downloads/BIOS/E7672IMS.A0O

- P67A-GD80 (A0E): http://91.121.148.119/downloads/BIOS/E7672IMS.A0E

 

.A0E i had no problems all the way up to 5.3ghz pll was left on auto just set 50x / 1866mhz xmp and 1.4vcore

 

http://valid.canardpc.com/show_oc.php?id=1686527

 

i put the post on the msi fourm the issue appers to be intel ME related and not bios

problem is now both the bios's on the gd-80 are crouupt and im awaiting a blank chip so i can get it working and finish my testing

  • Replies 732
  • Views 754.6k
  • Created
  • Last Reply

Top Posters In This Topic

Most Popular Posts

  • No problem with BBSE or PSC- I can run 5GHz+ at 1140 7-10-7 with PSC and BBSE 32M, then BCLKJ limit strikes - would be 7-9-7 if the board wouldn´t block- the Hyper issue is something that quite a few

Massman, sorry for delay. My 5400MHz 2600K can't get frequency more than 4830Mhz on this Sapphire board, so, no pll override in this bios version. I'm waiting new bios about two weeks, but Sapphire don't do it :(

Edited by LexEPoX

Yes,final and beta came with PLL.

 

Btw,

add beta BIOS from post #349.

Edited by stasio

Will they keep creating new bios for the B2 models?? I'm afraid to be stuck forever with the same beta bios :(

Gigabyte P67A-UD3-B3 board with F2 BIOS doesn't run 2133mhz ram divider but does have PLL override and runs my 5.6g chip at the 56x multi just fine. :)

Hope for a BIOS update to make the ram work at the higher divider again.

  • Author

That's good info.

 

It's pretty normal that the B3 BIOS works, though ... it's not like something significantly changed with updating to a new chipset revision.

ASRock ... B3 Ready !!! :D

 

 

Fatal1ty

P67 Professional (1.70 - 17/03/2011)

http://download.asrock.com/bios/1155/P67%20Professional(1.70)ROM.zip

 

1. Improve mouse fucntion under BIOS setup.

2. Keep User Profile after clear CMOS.

3. Patch 15" CRT monitor for BIOS setup.

 

 

P67 Extreme6 (1.60 - 17/03/2011)

http://download.asrock.com/bios/1155/P67%20Extreme6(1.60)ROM.zip

 

1. Improve mouse fucntion under BIOS setup.

2. Keep User Profile after clear CMOS.

3. Patch 15" CRT monitor for BIOS setup.

 

 

P67 Extreme4 (1.60 - 08/03/2011)

http://download.asrock.com/bios/1155/P67%20Extreme4(1.60)ROM.zip

 

Modify boot logo

 

 

P67 Pro (1.50 - 08/03/2011)

http://download.asrock.com/bios/1155/P67%20Pro(1.50)ROM.zip

 

Modify boot logo

 

 

P67 Pro3 (1.80 - 08/03/2011)

http://download.asrock.com/bios/1155/P67%20Pro3(1.80)ROM.zip

 

Modify boot logo
That's good info.

 

It's pretty normal that the B3 BIOS works, though ... it's not like something significantly changed with updating to a new chipset revision.

 

Has anyone confirmed this perchance? I'm hoping 1.60 for the ASRock Extreme 6 adds the positives of 1.30, 1.33A & 1.40 together. Don't want to brick the B2 board though.

b3 bioses will work with b2 I beleave

 

He didn't test the B3 bios with the B2 board, though. The above poster has a B3 board.

Did try putting the original UD3 board's P7e BIOS on the new rev3 board.... @BIOS said something wasn't right and it didn't work. :lol

Did try putting the original UD3 board's P7e BIOS on the new rev3 board.... @BIOS said something wasn't right and it didn't work. :lol

 

Crossflash must be done in DOS with special SPIFLASH.

I think that Asus forgot to have also P8P67 series mobos and not only the M4E :D

I think that Asus forgot to have also P8P67 series mobos and not only the M4E :D

 

Asus new BIOS:

 

P8P67-DELUXE

ftp://ftp.asus.com.tw/pub/ASUS/mb/LGA1155...E-ASUS-1502.zip

 

P8P67-EVO

ftp://ftp.asus.com.tw/pub/ASUS/mb/LGA1155...O-ASUS-1502.zip

 

P8P67-PRO

ftp://ftp.asus.com.tw/pub/ASUS/mb/LGA1155...O-ASUS-1502.zip

 

P8P67

ftp://ftp.asus.com.tw/pub/ASUS/mb/LGA1155...7-ASUS-1401.zip

Edited by stasio

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...