Jump to content
HWBOT Community Forums

Recommended Posts

Posted

Would it be possible to patch a P67A-UD4-B3 bios so we can flash with the Z68 equivalent ? Maybe it's the only way to play with hyper and 2133Mhz divider.

 

Thanks . :)

Posted (edited)
Would it be possible to patch a P67A-UD4-B3 bios so we can flash with the Z68 equivalent ? Maybe it's the only way to play with hyper and 2133Mhz divider.

 

Thanks . :)

 

I can do,

but will be untested,as I don't own UD4 board.

Let me know,if you want.

 

Edit:

Modded (untested) BIOS Z68X-UD4-B3 - F6 with Hex Editor XVI32 (working only for P67A-UD4-B3 BIOS):

 

http://www.mediafire.com/?k0uitnfncmfevp6

 

Before flashing,set in the BIOS "Optimized Defaults".

Flash with latest @BIOS 2.11.

After restart,BIOS maybe will "hang" on BIOS Screen for about 2-3 min.

Disable anything what you didn't use, with latest Touch BIOS

in the Windows.

Restart and after should be OK.Clear CMOS will also speed boot sequence.

 

Modded BIOS to flash back to P67A-UD4-B3 BIOS F4:

 

http://www.mediafire.com/?jr6ylz4hwo17zss

Edited by stasio
Posted

Thank you

 

I'll try it .

I can do,

but will be untested,as I don't own UD4 board.

Let me know,if you want.

 

Edit:

Modded (untested) BIOS Z68X-UD4-B3 - F6 with Hex Editor XVI32 (working only for P67A-UD4-B3 BIOS):

 

http://www.mediafire.com/?k0uitnfncmfevp6

 

Before flashing,set in the BIOS "Optimized Defaults".

Flash with latest @BIOS 2.11.

After restart,BIOS maybe will "hang" on BIOS Screen for about 2-3 min.

Disable anything what you didn't use, with latest Touch BIOS

in the Windows.

Restart and after should be OK.Clear CMOS will also speed boot sequence.

 

Modded BIOS to flash back to P67A-UD4-B3 BIOS F4:

 

http://www.mediafire.com/?jr6ylz4hwo17zss

Posted

Hello Stasio ,

 

I tried to update the bios , but there was a problem .

 

After the bios update , the motherboard got stuck at the LOGO screen . I waited more than 4 minutes .

I shut down and cleared CMOS .After the bootup there was no change . Stuck at the LOGO screen.

After 3 restarts , i got "main bios checksum error" and it recovered from the 2nd original P67 bios .

Posted (edited)

Hi,

yes I have also same problem with UD7,but i leave at the LOGO Screen (third/fourth time) and after some time (maybe 5 min) went to the Windows.I spend arround 1 hour to finally boot at normal way.

Did you try pressing DEL,to went to BIOS?

If BIOS ID it's not good,@BIOS will give "BIOS checksum error" or "Invalid BIOS image" on the beggining.

 

Btw,

if you don't want to try more here is new BIOS:

 

GA-P67A-UD4-B3 - F5b

Edited by stasio
Posted

Yes , i tried with the DEL key but no reaction . Completely stuck .

ALso tried 2nd time to flash with no change .

 

I'll leave it for an hour this time . :D

 

Thanks . :)

Posted (edited)
Yes , i tried with the DEL key but no reaction . Completely stuck .

ALso tried 2nd time to flash with no change .

 

I'll leave it for an hour this time . :D

 

Thanks . :)

Are you have your HD in AHCI/RAID or IDE in the BIOS?

I think Gigabyte added new RAID/AHCI ROM in the BIOS F6.

Maybe this will be the reason.

 

EDIT:

 

Lsdmeasap help me to solve the problem (and test).

eSATA option is the problem, not Intel ROM or that new ROM setting in the BIOS, you can set that anyway you want.

But main issue is eSATA setting so anyone that flashed already from yesterdays BIOS files can just wait at the splash screen until they can enter the BIOS, or wait until windows loads and then disable eSATA via BIOS or Touch BIOS.

 

So these have new RAID Rom (Which didn't matter), and a instruction on how to flash and make the hang stop once you flashed over to Z68X-UD4.

 

http://www.mediafire.com/?97ia16dscaxf796

Edited by stasio
Posted (edited)

P67A-GD65 bios (1.12b4) and INTEL ME firmware update ME1197

http://kr.msi.com/bios/E7681IMS_1C4.zip

 

note:after extract zipped files, update bios and me firmware using command line because bat file included seems don't work.

example:for bios afude234 E7681IMS.1C4

for intel me MEUP -ALLOWSV -F ME1197.BIN (reboot after that )

for testing if me firmware is upgraded MEUP -FWVER (new version of intel ME must be appear on screen)

Edited by xion
Posted

P67A-GD65 bios (1.12b5) E7681IMS.1C5

sorry for the link , i can't upload using hwbot attachments tool

http://www.sendspace.com/file/f8kuag

if you have a problem for booting windows after bios upgrade, i suggest you to disable usb3 support on bios setup.what new !!

 

- Updating the latest USB module version 4.6.3_USB_08.10.10.

- Fix the Achiva 27'' LCD QH270-IPSBS compatibility issue.

- Fix AEXEA DDR3-1600MHz memory boot fail.

- Don't clear password when load defaults in BIOS Setup.

- Fix mouse click will hang 0Dh in some page when entering setup with user password.

- Fix the GT ratio show error issue when OC genie enable;

- Fix the Package C State limit item No Limit option value.

- When unplug any USB mouse and plug again then system will hang in UEFI bios

- When using the USB mouse and move and play around for 1 minute then the mouse cursor disappear.

- You will see 2 cursor under overclocking page using the below mouse:

---> Steelseries KINZU

---> Razer Copperhead RZ01-050100

---> Razer Copperhead RZ01-050200

---> RAZER DeathAdder RZ01-0015, Infrared Gaming Mouse

---> ROCCAT KONE ROC-11-200

- Fix USB Keyboard can't use under dos.

- Fine tune 2133Mhz memory stabilization.

- Fix the issue that using AEXEA DDR3-1600MHz 4GB 1.65V will have normal boot up but when running Memtest Deluxe 3.8, display hangs at "running fast write tests¡*".

- Fix Post Screen show CPU speed 100x63=6300 MHz when "Adjust CPU Ratio in OS" is Enable.

Posted

- P67A-GD65 bios (1.12b4): http://91.121.148.119/downloads/BIOS/E7681IMS.1C4'>http://91.121.148.119/downloads/BIOS/E7681IMS.1C4'>http://91.121.148.119/downloads/BIOS/E7681IMS.1C4

- P67A-GD55 bios (1.12b4): http://91.121.148.119/downloads/BIOS/E7681IMS.1C4

- P67A-GD53 bios (1.12b4): http://91.121.148.119/downloads/BIOS/E7681IMS.1C4

 

- P67A-GD53 bios (1.12b5): http://91.121.148.119/downloads/BIOS/E7681IMS.1C5'>http://91.121.148.119/downloads/BIOS/E7681IMS.1C5'>http://91.121.148.119/downloads/BIOS/E7681IMS.1C5

- P67A-GD55 bios (1.12b5): http://91.121.148.119/downloads/BIOS/E7681IMS.1C5

- P67A-GD65 bios (1.12b5): http://91.121.148.119/downloads/BIOS/E7681IMS.1C5

 

- GA-Z68X-UD4-B3 bios (F7a): http://91.121.148.119/downloads/BIOS/z68xud4.f7a

Posted

Any news about the changelog for this new Gigabyte Z68 bios? Two things overall well be great, better compatibility with hyper chip and a "like asus fix" for all core running in turbo mode.

Posted

ASUS P8P67

http://www.mediafire.com/file/b759m6aj793jbs8/P8P67-ASUS-1608.zip

 

P8P67 Deluxe

http://www.mediafire.com/file/ib9xeps3j5ieq94/P8P67-DELUXE-ASUS-1606.zip

 

P8P67 Evo

http://www.mediafire.com/file/ucm9i3k1m53iv1f/P8P67-EVO-ASUS-1606.zip

 

P8P67 Pro

http://www.mediafire.com/file/qsuatggdn69k89z/P8P67-PRO-ASUS-1606.zip

 

P67 SABERTOOTH

http://www.mediafire.com/file/zl2ecay0afy7vj1/SABERTOOTH-P67-ASUS-1606.zip

 

P8H67-M-EVO

http://www.mediafire.com/file/3sq6pneridym2ha/P8H67-M-EVO-ASUS-1607.zip

 

1. Enhance support for Game Port on old audio cards.

2. Enhance SATA compatibility

3. Enhance mouse/keyboard support under UEFI

4. Enhance USB2.0 / 3.0 legacy support

5. Enhance PCIE compatibility

6. Enable support of CAS = 4 DDRIII-1333 modules

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...