GtiJason Posted March 25, 2016 Share Posted March 25, 2016 It's got potential ! Quote Link to comment Share on other sites More sharing options...
Noxinite Posted March 25, 2016 Share Posted March 25, 2016 Quote Link to comment Share on other sites More sharing options...
Alex@ro Posted March 25, 2016 Share Posted March 25, 2016 whats real volts? Quote Link to comment Share on other sites More sharing options...
xxbassplayerxx Posted March 25, 2016 Share Posted March 25, 2016 1.75V. I'm having the same issue with this chip that I had with my 6600K. Splave has tested that one for over 6.4GHz in HWBot Prime... For the life of me I can't get these chips even remotely stable over 6GHz. The highest I could pass HWBP on this one was 5.7GHz but it was fully capable of running 5G HWBP at 1.35V on water, before delid. Adding voltage doesn't seem to help, either. Â I may be snagging an OCF today to see if it's the board (or me being unable to clock well on the board). Quote Link to comment Share on other sites More sharing options...
xxbassplayerxx Posted March 25, 2016 Share Posted March 25, 2016 EDIT: Real volts were what was shown. Looks like I forgot. When Extreme mode is enabled on CPU-Z, it usually shows 1.35V or something. I thought that was what was happening. Quote Link to comment Share on other sites More sharing options...
dhenzjhen Posted March 25, 2016 Share Posted March 25, 2016 go BP!! http://chmod755.sdf-us.org/bossplayer.html Quote Link to comment Share on other sites More sharing options...
Rauf Posted March 25, 2016 Share Posted March 25, 2016 Sounds like bad contact. Can happen if you keep the glue on both pcb and ihs and use "normal" amount of tim on the die. I always scrape off the glue on ihs, keep it on the pcb. Perfect mount every time. Quote Link to comment Share on other sites More sharing options...
xxbassplayerxx Posted March 25, 2016 Share Posted March 25, 2016 Interesting thought... I'm using "normal" TIM and have glue on both.... Picked up a M8G and setting it up to go cold so we'll see! Quote Link to comment Share on other sites More sharing options...
Rauf Posted March 25, 2016 Share Posted March 25, 2016 check temps in xtu (when cold) Quote Link to comment Share on other sites More sharing options...
xxbassplayerxx Posted March 25, 2016 Share Posted March 25, 2016 Rauf, temps were fine Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.