April 9, 20178 yr Administrators I posted a link to dowload at page 2, sometimes looking at the thread benefits
April 9, 20178 yr Ahh, yep. Sorry. U right, I not read through the whole thread.... Anyway, still nothing. I give up. I hope HWBOT accept the submission this way as well.
April 9, 20178 yr You have to run this CPU-Z on Windows XP SP3 on SP2 the version from Websmile crashes too... If you have installed any CPU-Z (one of the Versions that crashes) you'll probably have to reinstall Windows (Deleting registry entries or uninstalling did nothing for me)
April 9, 20178 yr Quick question: In which category should i submit if i used 1x XP3200+ and 1x XP 3000+ (on the same board as dual CPU setup) for stage 3?
April 9, 20178 yr Pin mods and bridge mods don't work on NF2 chipsets. Pinmod to the socket of a Gigabyte GA-7N400S-L which comes pretty neutered from factory worked for me on a TBredB 2600+ (AXDA2600DKV3C JIUHB 0345MPM), see here for example using x12 where the stock multi is x16: "][/url] Edited April 9, 20178 yr by cbjaust
April 9, 20178 yr You can always lower the multi on AXP's. They are all unlocked downwards. Most people that ask want to raise the multi. Rather than challenge semantics, you can always check what works at Fab51.
April 10, 20178 yr You can always lower the multi on AXP's. They are all unlocked downwards.Most people that ask want to raise the multi. Rather than challenge semantics, you can always check what works at Fab51. ah, yes, forgot about that, nevertheless pinmodding on nForce2 worked for me. Not much use for raising multi apart from 200MHz FSB CPUs as far as I can see... Edited April 10, 20178 yr by cbjaust
April 10, 20178 yr I made a win reainstall, then using the cpu-z from websmile. But always the same. Wierd....
April 10, 20178 yr If someone would help me with my efficiency on 01 i'd really appreciate that TAGG`s 3DMark2001 SE score: 6333 marks with a GeForce2 Ti Using following settings: LOD 2.9, RAM @ 1T timings, AGP @99MHz Still no idea why the result in dragothic is so bad EDIT: Idiot me forgot to install Chipset driver^^ Edited April 11, 20178 yr by TAGG
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.