bob(nz) Posted September 11, 2018 Share Posted September 11, 2018 (edited) Hi, I have for sale a very good retail 7980XE. CPU has been delidded and not resealed. Limited testing and use (around 2-3 hours total) as I found a better CPU. 1 quick round of airtesting, and 2 quick tests on LN2 to see what is possible. Mainboard used was Asrock X299OC Formula, watercooling is basic custom loop with triple radiator, LN2 tests using Kingpin TRex Pot On water 4.8G Cinebench R15 is possible at 1.25V easy. 4.9 not, didnt try to bclk up With LN2 I did some quick testing using FSE and an air cooled GTX980Ti. Able to pass physics at 5.8G using 1.48v, with pot temp around -105. Was then I realised that Mesh and Mems were at default / low values ?? Rebooted with Mesh at 3.5G and Mems at 3600 tight timings. Was able to run 5.7G very easy at same volts, but couldnt get 5.8 to run. Didnt try other voltages at all, but managed to Bclk up to 5.73G and get a full pass. (sorry didnt grab the screen). I am sure you can get a bit more of of it with some testing and time!! Looking for 1800 USD / 1550 Euro (or nearest offer) - including express shipping / insurance worldwide Feel free to PM me if you have any questions Edited January 1, 2019 by bob(nz) Pricing reduced.... Link to comment Share on other sites More sharing options...
bob(nz) Posted September 11, 2018 Author Share Posted September 11, 2018 Bump... Link to comment Share on other sites More sharing options...
bob(nz) Posted September 12, 2018 Author Share Posted September 12, 2018 (edited) Bump - happy to consider reasonable offers.... Edited September 13, 2018 by bob(nz) Link to comment Share on other sites More sharing options...
bob(nz) Posted September 13, 2018 Author Share Posted September 13, 2018 Bump - pricing reduced.... Link to comment Share on other sites More sharing options...
bob(nz) Posted September 14, 2018 Author Share Posted September 14, 2018 ??? Link to comment Share on other sites More sharing options...
Gunslinger Posted September 14, 2018 Share Posted September 14, 2018 $5 shipped? 2 1 Link to comment Share on other sites More sharing options...
bob(nz) Posted September 15, 2018 Author Share Posted September 15, 2018 Haha - did I mention reasonable Mike?? ⚔️ Link to comment Share on other sites More sharing options...
bob(nz) Posted September 16, 2018 Author Share Posted September 16, 2018 Another Bump....great cpu for both 2d and 3d Link to comment Share on other sites More sharing options...
bob(nz) Posted September 18, 2018 Author Share Posted September 18, 2018 Bump to the top Link to comment Share on other sites More sharing options...
bob(nz) Posted September 24, 2018 Author Share Posted September 24, 2018 Another bump to the top... Link to comment Share on other sites More sharing options...
bob(nz) Posted September 26, 2018 Author Share Posted September 26, 2018 Another price drop.... Link to comment Share on other sites More sharing options...
bob(nz) Posted October 1, 2018 Author Share Posted October 1, 2018 Getting tired ? Link to comment Share on other sites More sharing options...
Members GeorgeStorm Posted October 1, 2018 Members Share Posted October 1, 2018 I'm struggling to sell my 7920x, why don't we swap chips and see if we have better luck with the other one? 1 Link to comment Share on other sites More sharing options...
bob(nz) Posted October 1, 2018 Author Share Posted October 1, 2018 Haha. - thanks, but thinking I will keep trying to sell first ? Link to comment Share on other sites More sharing options...
bob(nz) Posted October 1, 2018 Author Share Posted October 1, 2018 Last effort then I will just sell to non benchers (such a waste) price drop for the final time.... Link to comment Share on other sites More sharing options...
Members GeorgeStorm Posted October 1, 2018 Members Share Posted October 1, 2018 (edited) 7 minutes ago, bob(nz) said: Haha. - thanks, but thinking I will keep trying to sell first ? Don't ask don't get ? GLWS Edited October 1, 2018 by GeorgeStorm Link to comment Share on other sites More sharing options...
Fasttrack Posted October 1, 2018 Share Posted October 1, 2018 To the seller Please note that you must exclude Europe from your potential target group of buyers. There are very heavy import taxes from anywhere in the World, if the item is coming from outside of the European Union. Just trying to help. Link to comment Share on other sites More sharing options...
bob(nz) Posted October 1, 2018 Author Share Posted October 1, 2018 Okay thanks for the heads up. happy to declare as a gift, or the value of your choice if it helps people out :) Link to comment Share on other sites More sharing options...
bob(nz) Posted October 13, 2018 Author Share Posted October 13, 2018 New bump.... Link to comment Share on other sites More sharing options...
bob(nz) Posted January 1, 2019 Author Share Posted January 1, 2019 CPU SOLD Link to comment Share on other sites More sharing options...
Recommended Posts