The official Challenger 2020 Division IV round 1 - 4 cores only thread.

[Guest solidton]

4503.3Mhz clock/cache speed is allowed?

[Leeghoofd]

Nope, 4503.00000000000000000 mhz

[superpatodonaldo]

I am not able to run benchmate on win7, what could be the problem? I only can run wprime out of benchmate https://hwbot.org/submission/4334081_superpatodonaldo_wprime___32m_core_i7_7740x_4sec_602ms?recalculate=true

Edited January 21, 2020 by superpatodonaldo

[noliso]

4 hours ago, superpatodonaldo said:

I am not able to run benchmate on win7, what could be the problem? I only can run wprime out of benchmate https://hwbot.org/submission/4334081_superpatodonaldo_wprime___32m_core_i7_7740x_4sec_602ms?recalculate=true

I had to install the latest windows updates, then it worked

[superpatodonaldo]

15 hours ago, noliso said:

I had to install the latest windows updates, then it worked

thank you, will try

[Leeghoofd]

20 hours ago, superpatodonaldo said:

I am not able to run benchmate on win7, what could be the problem? I only can run wprime out of benchmate https://hwbot.org/submission/4334081_superpatodonaldo_wprime___32m_core_i7_7740x_4sec_602ms?recalculate=true

Always post or have a look at the Benchmate support thread here:

 

[Radi]

is es cpu alowed please ?

[Leeghoofd]

5 hours ago, Radi said:

is es cpu alowed please ?

nope , only in PRO OC, but if its latest gen you have to move to Elite

[Radi]

It's my old 7740x . I have look at my retail but it is dead ... what rady kill a cpu ... 2020 start well ... APERO !!! 

 

 

Thank you sir

[Leeghoofd]

!!!!!Due to multiplier detection error , Open Hardware Monitor will no longer be allowed for future submissions. Frequency (and temperature) Monitoring via HWinfo32/64 and or Benchmate!!!

[Guest solidton]

Maybe only with Benchmate?

[Leeghoofd]

not all benchmarks are supported by benchmate, so not an option

[Mykolay3ack]

please delete the result:

https://hwbot.org/submission/4328844

https://hwbot.org/submission/4328867

https://hwbot.org/submission/4328866

wrong cache speed

Edited February 2, 2020 by MykolayZack

[Leeghoofd]

2 hours ago, MykolayZack said:

please delete the result:

https://hwbot.org/submission/4328844

https://hwbot.org/submission/4328867

https://hwbot.org/submission/4328866

wrong cache speed

removed

[Matsglobetrotter]

my submission has been reported and blocked for not showing idle-load % of CPU meanwhile there is no such requirement mentioned in the rules.meanwhile leeghoofd chat message above dont mention such either.

[Leeghoofd]

was it this sub ?   Then you surpassed the 4503Mhz restriction. Could be I flucked up too, you got PM to link me to the blocked sub bro. Other option is you wanted to post this one in the Legacy 4 cores where there is no MHz restriction. I'll await your reply

Edited February 5, 2020 by Leeghoofd

[Matsglobetrotter]

hi ndeed i posted the comment in wrong division but yes submission was in legacy 4 core and more

[Leeghoofd]

Just resub it in Legacy 4 core

[cbjaust]

On 2/2/2020 at 7:49 AM, Leeghoofd said:

!!!!!Due to multiplier detection error , Open Hardware Monitor will no longer be allowed for future submissions. Frequency (and temperature) Monitoring via HWinfo32/64 and or Benchmate!!!

Are existing results with OHM going to be removed? I think a couple of mine were removed but I still see some results using OHM...

[Leeghoofd]

all subs from 02nd of feb need Hwinfo...

[Leeghoofd]

All scores are moderated, putting up a bunch of posts at HWBot's Facebook page, if you see your setup pass by, plz tag !!!