NATA 58 Posted January 15, 2021 Share Posted January 15, 2021 i can't take the test error Quote Link to comment Share on other sites More sharing options...
_mat_ Posted January 15, 2021 Share Posted January 15, 2021 (edited) System might be unstable. But according to the FAQ it can be many things. "My computer is completely stable. But I keep getting errors such as, "Redundancy Check Failed: Coefficient is too large." The notorious "Coefficient is too large" error is a common error that can be caused by many things. A full technical explanation is here. Because of the nature of error, it can be caused by literally anything. But below are the two most common causes" http://www.numberworld.org/y-cruncher/faq.html Edited January 15, 2021 by _mat_ Quote Link to comment Share on other sites More sharing options...
Splave Posted January 15, 2021 Share Posted January 15, 2021 What platform? What cpu and memory settings? Try stock and if it passes your oc is not stable here. Quote Link to comment Share on other sites More sharing options...
Mikecdm Posted January 15, 2021 Share Posted January 15, 2021 I spent a few hours the other day and ran into the same issue at first. I did as splave mentioned and put everything to stock and it finally ran the bench. I realized that what may have been stable enough to run other benches is nowhere near stable to run ycruncher. Quote Link to comment Share on other sites More sharing options...
yosarianilives Posted January 16, 2021 Share Posted January 16, 2021 Ycruncher is really heavy on the memory system, so depending on cpu could be too fast mem settings, too high fclk, too high cache. Only sometimes is it too high of core if you can't run off the bat. Stability in any other bench is irrelevant for ycruncher stability Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.