wytiwx - GA-EP45-UD3 @ 705.2MHz - 705.21 MHz Reference Frequency

[wytiwx]

Vcore 1.5V, Vtt 1.46V, Vnb 1.50V, Vdimm 2.7V

[TerraRaptor]

Congrats with another milestone!

[Noxinite]

Nice!

[ground]

CPU or board limited now? Curious if you'll push it further and if so how much :D

[TerraRaptor]

12 minutes ago, ground said:

CPU or board limited now?

Can be ram as well, 1:1 is quite stressful using the most of bandwidth

[Noxinite]

I'm just suprised by how low vNB is, the EP45T-Extremes scale to >1.6V.

[wytiwx]

2 hours ago, ground said:

CPU or board limited now? Curious if you'll push it further and if so how much

I think it maybe NB first, and dual LN2 pots is done for pushing

Edited March 15, 2021 by wytiwx

[wytiwx]

1 hour ago, Noxinite said:

I'm just suprised by how low vNB is, the EP45T-Extremes scale to >1.6V.

BIOS set Vnb is about 1.5~1.6V, can't remember it exactly but under 1.6V for sure

[GRIFF]

For me you CPU limited. My UD3P scale up to 1.52V not more need for 708mhz validation. Maybe in my case I'm limited by CPU with Cascade cooling and not LN2.

Edited March 15, 2021 by GRIFF

[wytiwx]

8 hours ago, GRIFF said:

For me you CPU limited. My UD3P scale up to 1.52V not more need for 708mhz validation. Maybe in my case I'm limited by CPU with Cascade cooling and not LN2.

I think my D2 RAM will hit its top freq if I keep pushing forward. Your platform is promising, do some LN2 things for it