Jump to content
HWBOT Community Forums

GIGABYTE Z690 Tachyon

sergmann
 Share

Recommended Posts

  • Replies 661
  • Created
  • Last Reply

Top Posters In This Topic

Popular Days

Top Posters In This Topic

Popular Days

Popular Posts

sergmann
sergmann

For everyone who gets a Gigabyte Z690 Tachyon, here is some information including bios.   As applies everywhere else in the OC area, the settings shown here are NOT suitable for 24/7 Systems

Forsaken1
Forsaken1

Have to say this is one of the best mobos I’ve owned along with a DFI and abit. sergmann assistance is why I am on gigabyte. Manufactures need more support to end user such as sergmann.?

nachtfalke
nachtfalke

no need Z790    

Posted Images

BenchMarc Contributor

BenchMarc

Posted
Posted (edited)

Having trouble getting a g7400 to boot 150 bclk, tried x3i,x3k, x6h, x4b didn't have a cpu bclk setting.  
Have tried the gpu in the x4 slot, x1 speed, security device disabled, 4000 mem strap, trefix9 set to 255, no luck.  Any ideas?

Edited by Forks
Mahameru Collaborator

Mahameru

Posted
Posted
  On 1/15/2023 at 12:44 AM, Forks said:

Having trouble getting a g7400 to boot 150 bclk, tried x3i,x3k, x6h, x4b didn't have a cpu bclk setting.  
Have tried the gpu in the x4 slot, x1 speed, security device disabled, 4000 mem strap, trefix9 set to 255, no luck.  Any ideas?

Expand  

You have to choose microcode first at Tweaker Page

Forsaken1 Contributor

Forsaken1

Posted
Posted (edited)
  On 1/14/2023 at 7:41 PM, sergmann said:

my profile for 8k with a-die is in the first post

Expand  

Thanks for profile.Not working team group 7800..

Struggling to get 8000 stable any cl with 13900ks. Ambient air memory.

x6h bios is fair.Takes a lot of time to boot compared to others.

GTL tool takes forever to load…….

Edited by Forsaken1
Kif_Kroker1729 Apprentice

Kif_Kroker1729

Posted
Posted

Any word on if F23a is any good?

I got this mobo with a 13600KF and some A die, and an RTX 30 series GPU
X4b would hang on A2 or A9 codes with it installed in either slot but worked fine with a GT710
I tried X6h, and the card works fine, but it is IMO super slow to post, and a brief attempt at memory OC didn't work out well; I'm still learning DDR5, so that it could be a skills issue; I don't know.

I might give F23a a go to see if it's any better, but I would like to ask if anyone else has tried it first.

CreasiicK Newbie

CreasiicK

Posted
Posted (edited)
  On 1/16/2023 at 1:40 AM, Kif_Kroker1729 said:

Any word on if F23a is any good?

I got this mobo with a 13600KF and some A die, and an RTX 30 series GPU
X4b would hang on A2 or A9 codes with it installed in either slot but worked fine with a GT710
I tried X6h, and the card works fine, but it is IMO super slow to post, and a brief attempt at memory OC didn't work out well; I'm still learning DDR5, so that it could be a skills issue; I don't know.

I might give F23a a go to see if it's any better, but I would like to ask if anyone else has tried it first.

Expand  

I’m currently using F23a, so far no problems. This is my daily gaming profile with 13700K 6400 z5 Adie air cooled

 

FEA8D5B5-B0BA-4DE6-A9ED-6DEBA8F6E62A.png

Edited by CreasiicK
  • Like 1
passionne56 Rookie

passionne56

Posted
Posted (edited)
  On 1/13/2023 at 12:14 AM, BOBKOC said:

if desired, you can use z790bios

  Reveal hidden contents
  Reveal hidden contents

 

Expand  

Interesting :

1. Does everything work fine on a Z690 Tachyon with a Z790 Tachyon bios ? Indeed, the OC buttons on each motherboard are a little bit different and may not work properly after such a flash.

2. What are the advantages to flash the Z790 bios ?

3. The only method to flash this bios is to use Q-flash ?

4. If this bios is not satisfying, will I be able to flash back a Z690 bios ?

 

I have just ordered the Z690 Tachyon, I did not receive it, hence my questions.

Edited by passionne56
  • Like 1
Motley Crue Enthusiast

Motley Crue

Posted
Posted (edited)

X4b best a die bios.GTL tool.Limited gpu support.biscuits.

x6h GTL tool works.Ya boots slow with a die.biscuits.

F23a.No GTL tool.No biscuits.

Thanks for memory posts above.Helped alot?.
8000 stable running on all above bios.

8200 almost stable.working on it.F23A.

Edited by Motley Crue
  • Like 2
  • Thanks 1
passionne56 Rookie

passionne56

Posted
Posted
  On 1/16/2023 at 1:20 PM, Motley Crue said:

X4b best a die bios.GTL tool.Limited gpu support.biscuits.

x6h GTL tool works.Ya boots slow with a die.biscuits.

F23a.No GTL tool.No biscuits.

Thanks for memory posts above.Helped alot?.
8000 stable running on all above bios.

8200 almost stable.working on it.F23A.

Expand  

OK, thank you. It is clearer for me. I will test F23A bios first.

  • Like 1
sergmann Experienced

sergmann

Posted
  • Author
Posted

With right settings for Mem you shouldn’t have any problems with boot with X4b or x6h bios. If they are wrong, boot will be a little bit longer. Try to play with voltages on it. Also SA voltage, with 12th Gen I always used 1.35v, with 13th Gen are 1.25v enough 

  • Like 1
passionne56 Rookie

passionne56

Posted
Posted
  On 1/16/2023 at 4:40 PM, sergmann said:

With right settings for Mem you shouldn’t have any problems with boot with X4b or x6h bios. If they are wrong, boot will be a little bit longer. Try to play with voltages on it. Also SA voltage, with 12th Gen I always used 1.35v, with 13th Gen are 1.25v enough 

Expand  

OK, thank you.

FengXi Explorer

FengXi

Posted
Posted
  On 1/16/2023 at 1:20 PM, Motley Crue said:

X4b best a die bios.GTL tool.Limited gpu support.biscuits.

x6h GTL tool works.Ya boots slow with a die.biscuits.

F23a.No GTL tool.No biscuits.

Thanks for memory posts above.Helped alot?.
8000 stable running on all above bios.

8200 almost stable.working on it.F23A.

Expand  

X6h works fine with my intel A770, F23a also works fine don't know to choose which one

BOBKOC Enthusiast

BOBKOC

Posted
Posted (edited)
  On 1/16/2023 at 12:27 PM, passionne56 said:

Interesting :

1. Does everything work fine on a Z690 Tachyon with a Z790 Tachyon bios ? Indeed, the OC buttons on each motherboard are a little bit different and may not work properly after such a flash.

2. What are the advantages to flash the Z790 bios ?

3. The only method to flash this bios is to use Q-flash ?

4. If this bios is not satisfying, will I be able to flash back a Z690 bios ?

Expand  

1/ for mе - good, OC buttons - work( +- 100Mhz CpuFrequency or +- 0.1 BCLK if selected in the bios), but I don't use it.

  Reveal hidden contents

2/ I don't know, my optimal ratio on any last bios is 6400@7200(VDD=1.51v/VDDQ=1.49v+VDDQcpu=1.38v/VDD2cpu=1.38v&SA(avto)=1.25v) 

 for 2х16GbHynixM-die+12700kf

  Reveal hidden contents

3,4/ 690->790&790->690 only by FPT  like  https://community.hwbot.org/topic/210084-gigabyte-z690-tachyon/?do=findComment&comment=634699 & after 790(on690)->790(new ver bios) or 690->690 as normal

Edited by BOBKOC
  • Thanks 2
passionne56 Rookie

passionne56

Posted
Posted
  On 1/16/2023 at 6:06 PM, BOBKOC said:

1/ for mе - good, OC buttons -work( +- frequency), but I don't use it.

2/ I don't know, my optimal ratio is 6400@7200(1.51v/1.49v+1.38v/1.38v&SA(avto)=1.25v) for 2х16GbHynixM-die+12700kf on any last bios.

3,4/ 690->790&790->690 only by FPT  like  https://community.hwbot.org/topic/210084-gigabyte-z690-tachyon/?do=findComment&comment=629314 & after 790(on690)->790(new ver bios) or 690->690 as normal

Expand  

Ok, thank you.

Motley Crue Enthusiast

Motley Crue

Posted
Posted

Borrowed ? info from all ram posts and came up with this for a daily.So far?.Thanks to all memory posters.

Daily memory OC on ambient 21c air.TG 7800 results.1682939133_daily-Copy.thumb.PNG.26555b2deec8f6bc6d4fc92cced1ebe4.PNGMy gskill 7200 is a poor clocker.?.So close with 8200 settings.

 

 

  • Like 1
Motley Crue Enthusiast

Motley Crue

Posted
Posted (edited)
  On 1/16/2023 at 11:59 PM, BOBKOC said:

https://yujihw.com/review/gigabyte-z790-aorus-tachyon-ddr5-oc-8400c34 to the pile? for ODT & ...

Expand  

Thanks brother.Working my way up with memory.Skip 8200 and try 8400?.

Can we…….get a die profiles in next bios?F23a is a solid bios for me so far.

I need GTL……….

 

Anyone flash F2d from z790 on z690?

 

Edited by Motley Crue
BOBKOC Enthusiast

BOBKOC

Posted
Posted (edited)
  On 1/17/2023 at 12:29 AM, Motley Crue said:

Anyone flash F2d from z790 on z690?

Expand  

Me?

for you & F23a - need(save your profile(s) on usb for later back) &↓↓↓↓↓

  Reveal hidden contents

 

 

Edited by BOBKOC
  • Like 2
  • Thanks 1
CreasiicK Newbie

CreasiicK

Posted
Posted
  On 1/17/2023 at 2:17 PM, BOBKOC said:

Me?

for you & F23a - need(save your profile(s) on usb for later back) &↓

  Reveal hidden contents

 

 

Expand  

how did it go? were you able to reach higher frequencies? I'm tempted to flash mine as well

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing
×
×
  • Create New...