GIGABYTE Z690 Tachyon

[sergmann]

my profile for 8k with a-die is in the first post

[BenchMarc]

Having trouble getting a g7400 to boot 150 bclk, tried x3i,x3k, x6h, x4b didn't have a cpu bclk setting.  
Have tried the gpu in the x4 slot, x1 speed, security device disabled, 4000 mem strap, trefix9 set to 255, no luck.  Any ideas?

Edited January 15, 2023 by Forks

[Mahameru]

1 hour ago, Forks said:

Having trouble getting a g7400 to boot 150 bclk, tried x3i,x3k, x6h, x4b didn't have a cpu bclk setting.  
Have tried the gpu in the x4 slot, x1 speed, security device disabled, 4000 mem strap, trefix9 set to 255, no luck.  Any ideas?

You have to choose microcode first at Tweaker Page

[Mahameru]

6 hours ago, Vertex_FR said:

yes this not the good version

You need 081N with Renesas pmic

Thanks for the info.. Is 084N newer version of them?

[BenchMarc]

Yeah, using the 0x09 microcode.  Seems like ptt wasn't actually disabling, for some reason putting it in csm let me do so and boot 150 bclk. 

[Forsaken1]

8 hours ago, sergmann said:

my profile for 8k with a-die is in the first post

Thanks for profile.Not working team group 7800..

Struggling to get 8000 stable any cl with 13900ks. Ambient air memory.

x6h bios is fair.Takes a lot of time to boot compared to others.

GTL tool takes forever to load…….

Edited January 15, 2023 by Forsaken1

[Kif_Kroker1729]

Any word on if F23a is any good?

I got this mobo with a 13600KF and some A die, and an RTX 30 series GPU
X4b would hang on A2 or A9 codes with it installed in either slot but worked fine with a GT710
I tried X6h, and the card works fine, but it is IMO super slow to post, and a brief attempt at memory OC didn't work out well; I'm still learning DDR5, so that it could be a skills issue; I don't know.

I might give F23a a go to see if it's any better, but I would like to ask if anyone else has tried it first.

[CreasiicK]

5 hours ago, Kif_Kroker1729 said:

Any word on if F23a is any good?

I got this mobo with a 13600KF and some A die, and an RTX 30 series GPU
X4b would hang on A2 or A9 codes with it installed in either slot but worked fine with a GT710
I tried X6h, and the card works fine, but it is IMO super slow to post, and a brief attempt at memory OC didn't work out well; I'm still learning DDR5, so that it could be a skills issue; I don't know.

I might give F23a a go to see if it's any better, but I would like to ask if anyone else has tried it first.

I’m currently using F23a, so far no problems. This is my daily gaming profile with 13700K 6400 z5 Adie air cooled

 

Edited January 16, 2023 by CreasiicK

[passionne56]

On 1/13/2023 at 1:14 AM, BOBKOC said:

if desired, you can use z790bios

  Reveal hidden contents

  Hide contents

https://disk.yandex.ru/d/DmjgLyfUMBah1w

https://disk.yandex.ru/d/kv10oHlJuYCHfQ  

flash by Q-Flash_Plus https://community.hwbot.org/topic/210084-gigabyte-z690-tachyon/?do=findComment&comment=629321 & if any problem with F2c+(because my configuration P(cores)_on+E(cores)_on - HT_off and timings for M-die are saved there) - optimized default or reset to default

 

Interesting :

1. Does everything work fine on a Z690 Tachyon with a Z790 Tachyon bios ? Indeed, the OC buttons on each motherboard are a little bit different and may not work properly after such a flash.

2. What are the advantages to flash the Z790 bios ?

3. The only method to flash this bios is to use Q-flash ?

4. If this bios is not satisfying, will I be able to flash back a Z690 bios ?

 

I have just ordered the Z690 Tachyon, I did not receive it, hence my questions.

Edited January 16, 2023 by passionne56

[Motley Crue]

X4b best a die bios.GTL tool.Limited gpu support.biscuits.

x6h GTL tool works.Ya boots slow with a die.biscuits.

F23a.No GTL tool.No biscuits.

Thanks for memory posts above.Helped alot?.
8000 stable running on all above bios.

8200 almost stable.working on it.F23A.

Edited January 16, 2023 by Motley Crue

[passionne56]

1 hour ago, Motley Crue said:

X4b best a die bios.GTL tool.Limited gpu support.biscuits.

x6h GTL tool works.Ya boots slow with a die.biscuits.

F23a.No GTL tool.No biscuits.

Thanks for memory posts above.Helped alot?.
8000 stable running on all above bios.

8200 almost stable.working on it.F23A.

OK, thank you. It is clearer for me. I will test F23A bios first.

[sergmann]

With right settings for Mem you shouldn’t have any problems with boot with X4b or x6h bios. If they are wrong, boot will be a little bit longer. Try to play with voltages on it. Also SA voltage, with 12th Gen I always used 1.35v, with 13th Gen are 1.25v enough 

[passionne56]

45 minutes ago, sergmann said:

With right settings for Mem you shouldn’t have any problems with boot with X4b or x6h bios. If they are wrong, boot will be a little bit longer. Try to play with voltages on it. Also SA voltage, with 12th Gen I always used 1.35v, with 13th Gen are 1.25v enough 

OK, thank you.

[FengXi]

4 hours ago, Motley Crue said:

X4b best a die bios.GTL tool.Limited gpu support.biscuits.

x6h GTL tool works.Ya boots slow with a die.biscuits.

F23a.No GTL tool.No biscuits.

Thanks for memory posts above.Helped alot?.
8000 stable running on all above bios.

8200 almost stable.working on it.F23A.

X6h works fine with my intel A770, F23a also works fine don't know to choose which one

[BOBKOC]

On 1/16/2023 at 3:27 PM, passionne56 said:

Interesting :

1. Does everything work fine on a Z690 Tachyon with a Z790 Tachyon bios ? Indeed, the OC buttons on each motherboard are a little bit different and may not work properly after such a flash.

2. What are the advantages to flash the Z790 bios ?

3. The only method to flash this bios is to use Q-flash ?

4. If this bios is not satisfying, will I be able to flash back a Z690 bios ?

1/ for mе - good, OC buttons - work( +- 100Mhz CpuFrequency or +- 0.1 BCLK if selected in the bios), but I don't use it.

Spoiler

2/ I don't know, my optimal ratio on any last bios is 6400@7200(VDD=1.51v/VDDQ=1.49v+VDDQcpu=1.38v/VDD2cpu=1.38v&SA(avto)=1.25v) 

 for 2х16GbHynixM-die+12700kf

Spoiler

  8P+4E+HT

3,4/ 690->790&790->690 only by FPT  like  https://community.hwbot.org/topic/210084-gigabyte-z690-tachyon/?do=findComment&comment=634699 & after 790(on690)->790(new ver bios) or 690->690 as normal

Edited January 19, 2023 by BOBKOC

[passionne56]

19 minutes ago, BOBKOC said:

1/ for mе - good, OC buttons -work( +- frequency), but I don't use it.

2/ I don't know, my optimal ratio is 6400@7200(1.51v/1.49v+1.38v/1.38v&SA(avto)=1.25v) for 2х16GbHynixM-die+12700kf on any last bios.

3,4/ 690->790&790->690 only by FPT  like  https://community.hwbot.org/topic/210084-gigabyte-z690-tachyon/?do=findComment&comment=629314 & after 790(on690)->790(new ver bios) or 690->690 as normal

Ok, thank you.

[Motley Crue]

1 hour ago, FengXi said:

X6h works fine with my intel A770, F23a also works fine don't know to choose which one

Myself testing with F23a.Then I switch to X6h?.

Several great memory overclocks on previous pages.Thanks to all who posted results?.

 

[Mahameru]

5 hours ago, passionne56 said:

OK, thank you.

Profiles from @sergmannare really good for reference and starting point. Please do note that sometimes you need to find your own setting like subtimings and voltages because every combination of IMC and sticks can be different from one to another.

[Motley Crue]

Borrowed ? info from all ram posts and came up with this for a daily.So far?.Thanks to all memory posters.

Daily memory OC on ambient 21c air.TG 7800 results.My gskill 7200 is a poor clocker.?.So close with 8200 settings.

 

 

[BOBKOC]

18 minutes ago, Motley Crue said:

My gskill 7200 is a poor clocker.?.So close with 8200 settings

https://yujihw.com/review/gigabyte-z790-aorus-tachyon-ddr5-oc-8400c34 to the pile? for ODT & ...

Edited January 17, 2023 by BOBKOC

[Motley Crue]

30 minutes ago, BOBKOC said:

https://yujihw.com/review/gigabyte-z790-aorus-tachyon-ddr5-oc-8400c34 to the pile? for ODT & ...

Thanks brother.Working my way up with memory.Skip 8200 and try 8400?.

Can we…….get a die profiles in next bios?F23a is a solid bios for me so far.

I need GTL……….

 

Anyone flash F2d from z790 on z690?

 

Edited January 17, 2023 by Motley Crue

[asdkj1740]

just in case,

the bios f2b for gigabyte z790 aorus tachyon has been taken down

https://drive.google.com/file/d/1bvvFpGNLDK1pxBHFrVFrOR2kJ93ihR1m/view?usp=sharing

 

 

Edited January 17, 2023 by asdkj1740

[BOBKOC]

On 1/17/2023 at 3:29 AM, Motley Crue said:

Anyone flash F2d from z790 on z690?

Me?

for you & F23a - need(save your profile(s) on usb for later back) &↓↓↓↓↓

Spoiler

0/ all my FPT actions are done when: CSM-on & SSD(MBR) & Legacy boot

Spoiler

1/ flash by Q-Flash Plus  => https://disk.yandex.ru/d/bkj31DC0kmPxCA  

2/ flash by FPT( https://disk.yandex.ru/d/uKA_2jUewIVdHg ) => F2(final) https://disk.yandex.ru/d/kvhsl5upvVes7Q or F2d(beta) https://disk.yandex.ru/d/Q1t6gqGm-D6Wyg 

Spoiler

and↓

Spoiler

 see?  аfter power down https://community.hwbot.org/uploads/monthly_2023_01/image.png.eefeea5808ff8b06a433cfdfef23d9f7.png

3/ for 690back flash by FPT => https://disk.yandex.ru/d/Pyv4HcOxPap-wQ

Spoiler

P.S. for save Bios use -D
+ https://community.hwbot.org/topic/210084-gigabyte-z690-tachyon/?do=findComment&comment=634633

 

 

 

Edited February 5, 2023 by BOBKOC

[Motley Crue]

BOBOC

Not sure who you are.The links provided are god sent.8400 to ez?.Thanks.

 

 

 

 

[CreasiicK]

On 1/17/2023 at 6:17 AM, BOBKOC said:

Me?

for you & F23a - need(save your profile(s) on usb for later back) &↓

  Reveal hidden contents

0/ all my FPT actions are done when: CSM-on & SSD(MBR) & Legacy boot

  Reveal hidden contents

1/ flash by Q-Flash Plus https://community.hwbot.org/topic/210084-gigabyte-z690-tachyon/page/12/#comment-629321 => https://disk.yandex.ru/d/bkj31DC0kmPxCA  

2/ flash by FPT( https://disk.yandex.ru/d/uKA_2jUewIVdHg ) => https://disk.yandex.ru/d/Q1t6gqGm-D6Wyg 

  Reveal hidden contents

and↓

  Reveal hidden contents

 see?  аfter power down  https://community.hwbot.org/uploads/monthly_2023_01/image.png.eefeea5808ff8b06a433cfdfef23d9f7.png 412.52 kB · 0 downloads

3/ for 690back flash by FPT => https://disk.yandex.ru/d/Pyv4HcOxPap-wQ

  Reveal hidden contents

P.S. for save Bios use -D
+ https://community.hwbot.org/topic/210084-gigabyte-z690-tachyon/?do=findComment&comment=634633

 

 

 

how did it go? were you able to reach higher frequencies? I'm tempted to flash mine as well