freak77power Posted December 18, 2024 Posted December 18, 2024 20 hours ago, sergmann said: don`t forget, I speak from 8400+ As I said xo BIOS requires 1.14v for SA and Official Gigabyte BIOS F11b -> 1.3v for the same memory setting. As I said different microcode yields different results for whatever reason. Quote
sergmann Posted March 18 Author Posted March 18 new bios versions for Z790 and Z790X are in the first post 3 Quote
freak77power Posted March 18 Posted March 18 16 hours ago, sergmann said: new bios versions for Z790 and Z790X are in the first post What's new in this version? Quote
sergmann Posted March 19 Author Posted March 19 5 hours ago, freak77power said: What's new in this version? Small microcode update 0x12C. But I have had some problems with mc change yesterday. Update will follow, at the moment, please use auto selected mc Quote
sergmann Posted March 19 Author Posted March 19 have removed the link to the X7S bios because of bug during microcode switch and add new versions (X7U) for Tachyon and Tachyon X. MC-Switch works now fine ###################################### Z790 AORUS TACHYON / X BIOS RELEASE NOTE ###################################### X7U 19/03/2025 1. Fixed MCU swap X7T 18/03/2025 1. Add 0x10e 0x11f and remove 0x11a 0x11d for Change MCU section X7S 18/03/2025 1. update MCU 123 to 12C 2. Add Change MCU 0x105 remove 0x10e X7R 12/03/2024 1. Added Microcode 0x123 for 0x671 ( RaptorLake CPU ) 1 2 Quote
freak77power Posted March 27 Posted March 27 On 3/19/2025 at 3:56 PM, sergmann said: have removed the link to the X7S bios because of bug during microcode switch and add new versions (X7U) for Tachyon and Tachyon X. MC-Switch works now fine ###################################### Z790 AORUS TACHYON / X BIOS RELEASE NOTE ###################################### X7U 19/03/2025 1. Fixed MCU swap X7T 18/03/2025 1. Add 0x10e 0x11f and remove 0x11a 0x11d for Change MCU section X7S 18/03/2025 1. update MCU 123 to 12C 2. Add Change MCU 0x105 remove 0x10e X7R 12/03/2024 1. Added Microcode 0x123 for 0x671 ( RaptorLake CPU ) x7u is an excellent BIOS. DDR5 8400 A-Die C36 + 14900KS 1 Quote
sergmann Posted March 28 Author Posted March 28 With @auto microcode more stable? I’ve only tested it for XOC, was more stable for me at high Mem frequency 1 Quote
freak77power Posted March 29 Posted March 29 On 3/28/2025 at 12:52 AM, sergmann said: With @auto microcode more stable? I’ve only tested it for XOC, was more stable for me at high Mem frequency I loaded the quick 8400 profile and changed the timing to 36-46-46-46-64, Trefi Max. Set memory voltage to 1.5/1.5. Left default 1.4/1.4 for TX and VDD2 and set SA to 1.25! Works awesome. 1 Quote
unityofsaints Posted April 10 Posted April 10 No X7T BIOS in this thread? Apparently it's the best one for 32M. Quote
freak77power Posted April 11 Posted April 11 3 hours ago, unityofsaints said: No X7T BIOS in this thread? Apparently it's the best one for 32M. 32M? Quote
sabishiihito Posted April 11 Posted April 11 16 hours ago, unityofsaints said: No X7T BIOS in this thread? Apparently it's the best one for 32M. 1 Quote
sergmann Posted April 12 Author Posted April 12 23 hours ago, sabishiihito said: X7T bios have problems with microcode switching, this is why I`ve removed that all and just let X7U online. It´s same like X7T but without any problems during microcode switch 1 Quote
str8_an94baller Posted May 7 Posted May 7 yo guys need help with Z790 stuff, sorry if wrong board thread but I can't find one for the Z790H awhile back I had asrock timing configurator and asus memtweakit, however it stopped working on my installation of windows and it seems that attempts of reinstalling it is futile I tried the one from Maximus apex OC pack (M13ocpak1224b) and memtweakit doesn't show any of the timings asrock timing configurator says "driver cannot be loaded, re-install..." + "access violation at address 0042280E asrtc.exe 000000C" and just displays garbled timings afterwards have anyone managed to find a fix? Windows 11 22H2 22621.5189 Enterprise (not LTSC) @Mr. Fox any input on this would be appreciated, sorry for the ping Quote
freak77power Posted May 9 Posted May 9 It looks like Intel released a new firmware 12f. Speaking of which, are there any plans to put back the SP score feature to xO bios? Quote
sabishiihito Posted Friday at 08:06 PM Posted Friday at 08:06 PM Biscuits/C.P. score still exists in X7u, but doesn't seem to work with the 14900KS (never did from what I recall). Here's hoping to a new XOC bios with 12f and giving the score for that chip. Quote
diyavolik777 Posted Sunday at 06:24 PM Posted Sunday at 06:24 PM X7u hi, how do I fix rgb so that what I put in the program works, and not always the orange one is shining ? Quote
diyavolik777 Posted Sunday at 08:56 PM Posted Sunday at 08:56 PM (edited) X7u 👍 but 8800 I can't achieve stability at Apex with 8800, I managed to do it. voltage Apex 8600 VDD2 requires less than Tachyon 8600 14900ks sp106 -sp MC 86 VCCSA Voltage 1.25 VDDQ CPU Voltage 1.345 VDD2 CPU Voltage 1.45 Apex -1,4375 DRAM VDD 1.58 DRAM VDDQ 1.56 DDR5 King Bank 8000 48gb Edited Sunday at 09:03 PM by diyavolik777 Quote
sabishiihito Posted Monday at 05:03 PM Posted Monday at 05:03 PM Wow, how the heck did you manage that on Tachyon?? Did you use either of the 8400 XMP/XMP2 presets? Quote
freak77power Posted Monday at 05:24 PM Posted Monday at 05:24 PM 20 hours ago, diyavolik777 said: X7u 👍 but 8800 I can't achieve stability at Apex with 8800, I managed to do it. voltage Apex 8600 VDD2 requires less than Tachyon 8600 14900ks sp106 -sp MC 86 VCCSA Voltage 1.25 VDDQ CPU Voltage 1.345 VDD2 CPU Voltage 1.45 Apex -1,4375 DRAM VDD 1.58 DRAM VDDQ 1.56 DDR5 King Bank 8000 48gb I can't even boot M die on my tachyon Quote
diyavolik777 Posted yesterday at 02:40 PM Posted yesterday at 02:40 PM no the full manual setting of 24.7 works fine Not what XMP/XMP2 presets Quote
diyavolik777 Posted yesterday at 02:50 PM Posted yesterday at 02:50 PM (edited) first, I used these settings, set up timings and v+ disabled fast loading boot when I set everything up, I turned it all off and everything works 24.7 But the voltage VDD2 I have to overstate it, I don't like it. This needs to be fixed.!!!!!!!! sa higher than 1.26v+ leads to windows boot issues, which is also a problem. Edited yesterday at 02:55 PM by diyavolik777 Quote
sabishiihito Posted yesterday at 03:49 PM Posted yesterday at 03:49 PM (edited) 1 hour ago, diyavolik777 said: no the full manual setting of 24.7 works fine Not what XMP/XMP2 presets I meant these options: Edited yesterday at 03:50 PM by sabishiihito Quote
diyavolik777 Posted yesterday at 03:51 PM Posted yesterday at 03:51 PM (edited) I don't use it at all Edited yesterday at 04:01 PM by diyavolik777 Quote
diyavolik777 Posted yesterday at 04:08 PM Posted yesterday at 04:08 PM I turned it off now, with these settings the latency is up to 51, with it off it's 49,5+- Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.