LeGaL^CriMeR Posted April 24, 2011 Share Posted April 24, 2011 Not necessarily, windows xp works only in ide mode success Quote Link to comment Share on other sites More sharing options...
darkage Posted April 25, 2011 Share Posted April 25, 2011 just gave up :-) people just know too much for me :-) i think i can't read the rules :-( Quote Link to comment Share on other sites More sharing options...
Massman Posted April 25, 2011 Share Posted April 25, 2011 unfortunately I can not pass the test again, will wait for new memories, g.skill ECO 1.35v. OCGENIE filed in my memory too low voltage that is less about them. Because it is not certified for p55 boards.1:100 to successfully pass the entire test super pi. Yet if not big problem, and feel that can be left result leave. Here is what the error shows me problem makes it nearly every Lop I show you the last. Can you try different mem? OC Genie not being stable = Quote Link to comment Share on other sites More sharing options...
Massman Posted April 25, 2011 Share Posted April 25, 2011 i think johnamd is right legal^crimer submission can not be valid as the blck will never go up even when stressed if it has 209,40X18 (3769,20MHZ) in cpuz he can't submit as 210,47 and in case of doubt he must post againas for the superpi32 if it is not stable can't be submited i think i have made some testings and even with a striped xp i only gain 11sec in superpi 32 never more MHZ and when the system posted at 3570 in OS cpuz would show 3566 and stressing the system would not make it go up darkage The BIOS setting is sometimes just a bit off. Legal's result is ... legal . Quote Link to comment Share on other sites More sharing options...
Massman Posted April 25, 2011 Share Posted April 25, 2011 i can use windows xp,the change controler from ide .. ahci is mandatory? XP is ok. And smart. Quote Link to comment Share on other sites More sharing options...
LeGaL^CriMeR Posted April 25, 2011 Share Posted April 25, 2011 will use a memory sandy motherboards which is low voltage (kingston), but will it flash with firmware of g.skill, I think that is not prohibited? I'll try to days to show new results without the other pictures and presenter. Quote Link to comment Share on other sites More sharing options...
johnamd Posted April 25, 2011 Share Posted April 25, 2011 some participants were doing WRONG in the past,οκ.but attempting to cover the WRONG to suggest it is unacceptable (ι7 860 224bus with oc genie) sorry Quote Link to comment Share on other sites More sharing options...
LeGaL^CriMeR Posted April 25, 2011 Share Posted April 25, 2011 maybe used OC Dashboard that comes with the motherboard Quote Link to comment Share on other sites More sharing options...
johnamd Posted April 25, 2011 Share Posted April 25, 2011 i think montaz video Quote Link to comment Share on other sites More sharing options...
Massman Posted April 27, 2011 Share Posted April 27, 2011 @ Massman: I've made the submission, link: http://www.hwbot.org/community/submission/2159678_ Video to match: Many thanks for your efforts, Regards: HGyu Fixed some participants were doing WRONG in the past,οκ.but attempting to cover the WRONG to suggest it is unacceptable (ι7 860 224bus with oc genie) sorry MSI just let me know that 224 is perfectly possible Quote Link to comment Share on other sites More sharing options...
LeGaL^CriMeR Posted April 27, 2011 Share Posted April 27, 2011 Guess what. After pressing the OCGENIE the system and need time to be included. Dock is a black screen, the man watching her post the numbers of separate remote control. And before you include screen and it rebooted and set manually from BCLK OC controller. Therefore we see the result only by showing the image on the monitor. My result and another colleague posted in OCGENIE contest with the same processor, and we have such success by nearly 50% overclock! Quote Link to comment Share on other sites More sharing options...
Massman Posted April 27, 2011 Share Posted April 27, 2011 But dashboard is not even connected? Quote Link to comment Share on other sites More sharing options...
LeGaL^CriMeR Posted April 27, 2011 Share Posted April 27, 2011 OC cable panel is folded and does not see well edali was hooked. So please make a new video being shot and the rear of the board. I'm sure the mod is on the board or the CPU but can not prove. Quote Link to comment Share on other sites More sharing options...
Massman Posted April 27, 2011 Share Posted April 27, 2011 At 0:17 you can see that the Dashboard is not connected. Maybe the negative temperature help to clock higher ... Quote Link to comment Share on other sites More sharing options...
johnamd Posted April 27, 2011 Share Posted April 27, 2011 The video editing are the deviation? Quote Link to comment Share on other sites More sharing options...
LeGaL^CriMeR Posted April 27, 2011 Share Posted April 27, 2011 I did my work, to include OC GENIE launch of 18x210. With the help of BCLK buttons, the CPU goes just as much as "clon22" fsb-223.45. With one (1) step up and blue screen. I think the rules we should have a ban in the BIOS of BCLK buttons. To not like me and others to doubt the ability of a OCGENIE. Quote Link to comment Share on other sites More sharing options...
Massman Posted April 27, 2011 Share Posted April 27, 2011 Big Bang Trinergy doesn't have BCLK buttons ... Quote Link to comment Share on other sites More sharing options...
LeGaL^CriMeR Posted April 27, 2011 Share Posted April 27, 2011 (edited) There are but a dashboard Edited April 27, 2011 by LeGaL^CriMeR Quote Link to comment Share on other sites More sharing options...
Massman Posted April 27, 2011 Share Posted April 27, 2011 But Dashboard is not connected. You can see that in the video at 0:17 ... Quote Link to comment Share on other sites More sharing options...
johnamd Posted April 27, 2011 Share Posted April 27, 2011 LapinouX video is failed ,not appear in the original bus after reset bios.look it admin please Quote Link to comment Share on other sites More sharing options...
LeGaL^CriMeR Posted April 27, 2011 Share Posted April 27, 2011 OMG 2 result the same , how to overclock i7 860 up to 4Ghz ? Used mod or cheat ? i don`t understand Quote Link to comment Share on other sites More sharing options...
Massman Posted April 27, 2011 Share Posted April 27, 2011 LapinouX video is failed ,not appear in the original bus after reset bios.look it admin please BIOS was reset. You can see the message about CMOS reset and option F1 to boot in OS. CPU-Z video is legit. OMG 2 result the same , how to overclock i7 860 up to 4Ghz ? Used mod or cheat ? i don`t understand Sigh. It's not because others can do it and you not it's not legit ... check their system closer and you will see difference. Quote Link to comment Share on other sites More sharing options...
johnamd Posted April 27, 2011 Share Posted April 27, 2011 i dont seew bus 133, Quote Link to comment Share on other sites More sharing options...
Massman Posted April 27, 2011 Share Posted April 27, 2011 Because after reset it show bios logo again. Quote Link to comment Share on other sites More sharing options...
LeGaL^CriMeR Posted April 27, 2011 Share Posted April 27, 2011 (edited) It would not be bad to look at and in the Facebook page. penultimate clip, and he is i7 860, and OC GENIE clock it the same way 210x18. Jump two participants made the whole competition for laughter. EDIT: Video of LapinouX's, not shown CPU-Z (memory) and CPU-Z (SPD) Edited April 27, 2011 by LeGaL^CriMeR Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.